• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.3
• /
• pp.1-8
• /
• 1997

Internal solitary waves between two-stratified fluid layers are examined. Hamilton's principle is used to derive a governing equation. The wave speed-wave height relation is obtained and this agrees well with the experiment. The wave profiles obtained also agree well with the experimental result. There exist minimum and maximum wave speeds depending on the depth ratio and the density ratio of two layers. The KdV equation overpredicts the wave speed for a given wave height and underpredict the wave height for a given wave speed.

• International Journal of Concrete Structures and Materials
• /
• v.11 no.2
• /
• pp.301-313
• /
• 2017

This paper presents the fibre-matrix interfacial properties of hooked end steel fibres embedded in ultra-high performance mortars with various water/binder (W/B) ratios. The principle objective was to improve bond behaviour in terms of bond strength by reducing the (W/B) ratio to a minimum. Results show that a decrease in W/B ratio has a significant effect on the bond-slip behaviour of both types of 3D fibres, especially when the W/B ratio was reduced from 0.25 to 0.15. Furthermore, the optimization in maximizing pullout load and total pullout work is found to be more prominent for the 3D fibres with a larger diameter than for fibres with a smaller diameter. On the contrary, increasing the embedded length of the 3D fibres did not result in an improvement on the maximum pullout load, but increase in the total pullout work.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.899-909
• /
• 2015

A dual-input boost-buck converter with coupled inductors (DIBBC-CI) is proposed as a thermoelectric generator (TEG) power conditioner with a wide input voltage range. The DIBBC-CI is built by cascading two boost cells and a buck cell with shared inverse coupled filter inductors. Low current ripple on both sides of the TEG and the battery are achieved. Reduced size and power losses of the filter inductors are benefited from the DC magnetic flux cancellation in the inductor core, leading to high efficiency and high power density. The operational principle, impact of coupled inductors, and design considerations for the proposed converter are analyzed in detail. Distributed maximum power point tracking, battery charging, and output control are implemented using a competitive logic to ensure seamless switching among operational modes. Both the simulation and experimental results verify the feasibility of the proposed topology and control.

• Advances in aircraft and spacecraft science
• /
• v.10 no.1
• /
• pp.83-106
• /
• 2023

In this work, the static behavior of FGM macro and nano-plates under thermomechanical loading. Equilibrium equations are determined by using virtual work principle and local and non-local theory. The novelty of the current model is using a new displacement field with four variables and a warping function considering the effect of shear. Through this analysis, the considered sandwich FGM macro and nanoplates are a homogeneous core and P-FGM faces, homogeneous faces and an E-FGM core and finally P-FGM faces and an E-FGM core. The analytical solution is obtained by using Navier method. The model is verified with previous published works by other models and very close results are obtained within maximum 1% deviation. The numerical results are performed to present the influence of the various parameters such as, geometric ratios, material index as well as the scale parameters are investigated. The present model can be applicable for sandwich FG plates used in nuclear, aero-space, marine, civil and mechanical applications.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.775-785
• /
• 2015

Many equalization circuits have been proposed to improve pack performance and reduce imbalance. Although bidirectional equalization topologies are promising in these methods, pre-equalization global equalization strategy is lacking. This study proposes a novel state-of-charge (SoC) equalization algorithm for bidirectional equalizer based on particle swarm optimization (PSO), which is employed to find optimal equalization time and steps. The working principle of bidirectional equalization topologies is analyzed, and the reason behind the application of SoC as a balancing criterion is explained. To verify the performance of the proposed algorithm, a pack with 12 LiFePO4 batteries is applied in the experiment. Results show that the maximum SoC gap is within 2% after equalization, and the available pack capacity is enhanced by 13.2%. Furthermore, a comparison between previously used methods and the proposed PSO equalization algorithm is presented. Experimental tests are performed, and results show that the proposed PSO equalization algorithm requires fewer steps and is superior to traditional methods in terms of equalization time, energy loss, and balancing performance.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.217-217
• /
• 2006

The surface energy control capability of electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. Herein, the one step nano-encapsulation of protein drugs using electrospraying was developed. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance between electric potentials, etc were examined to obtain the maximum efficiency. The recovery of particles was found relatively high as could be conjectured based on the principle of electrospraying. When organic solvents were employed, the processing windows of electrospraying were relatively narrow than water systems. Efficient nano-encapsulation of BSA with polymers was conveniently achieved using electrospraying at above 12 kV.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.50-60
• /
• 2001

This study is to clarify the concept of \"Americanization\" among korean modern clothing culture by investigating magazines from 1920s to 1930s. The Americanization of modern clothing culture can be divided to New fashion, Sports-wear, and Cloth improvement. 1. New fashion, Western culture was the main stream of new fashion, and modern boys and girls could bear cultural privileged consciousness. And the spread of modern culture was so fast that exaggerated fashional preference provoked extravagancy and loss of individuality. 2. Sports-wear. Under the rule of Japanese imperialism, initial sports activity was encouraged to regulate colony by principle and order. Through the sports-wear, practicality of clothing, exposure of female body, and the concept of T.P.O.(Time, place, occasion) were introduced. 3. Cloth improvement. The capitalism and modern concept of \"time\" were introduced and promoted maximum productivity. And to increase productivity, imperialist educated conveniency of western clothes and inconveniency of traditional Korean clothes. These could affect Koreans to think themselves a sense of inferiority(uncivilized complex).ncivilized complex).

• Archives of Plastic Surgery
• /
• v.33 no.3
• /
• pp.388-391
• /
• 2006

Hemangioma is one of the most common congenital tumors in the region of the face and neck. Although histologically benign, these facial masses are clinically malignant for their deforming and inexorable growth, especially in so-called 'cavernous hemangioma'. Carvenous hemangioma is the most common primary tumor occurring in the adult orbit. This tumor has symptoms that characteristically develop over several years with slowly progressive proptosis, eyeball deviation, hyperopia, diplopia and optic nerve compression. Today, hemangiomas are being treated by various methods; steroids, electrocoagulation, injection of sclerosing agent, cryotherapy, radiation therapy, laser therapy, and surgical treatment, etc. In principle, surgical approaches to the orbit must provide maximum safety and optimal visualization. We have experienced a case of large cavernous hemangioma in the orbit inferolaterally. The surgical treatment of tumor was achieved by the bicoronal approach combined with inferomedial and inferolateral orbitotomy. This surgical approach allows better visualization of the tumor and greater protection of essential anatomic structures. We obtained satisfactory results in terms of aesthetic and functional consideration. We present our case with a brief review of the literature related to orbital cavernous hemangioma.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.E
• /
• pp.373-381
• /
• 1993

To understand the human exposure levels of volatile halogenated hydrocar-bons in ambient air, a new rapid and convenient analytical method for determination of the compounds in gaseous phase was evaluated and established. The method is based upon passsive diffusion to personal sampler containing adsorbent and solvent extraction followed by purge trap/ on-column cryof-ocusing method. A new method needs no special instrumentation for gas collection because it is based upon the passive diffusion principle. The typical chromatogram obtained in this study proved that rapid and simultaneous determination of target analytes was possible with good resolution. The developed method was successfully applied to determine the volatile halogenated hydrocarbons in indoor air and the values obtained by this new method were compared with those by direct suction method. The concentration of carbon tetrachloride, 1,1,2-trichloroethylene, chloroform showed the values below 400$\mug/m^3$ except the maximum of 1,513$\mug/m^3$ of chloroform. 1,1,1-Trichloroethane showed approximately 1,000 to 5,000$\mug/m^3$ range of diurnal fluctuation in indoor air.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1178-1182
• /
• 2004

This paper presents web-based virtual laboratory system for electronic and digital circuit experiments. Through our virtual laboratory, the learners will be capable of learning the concepts and theories related to circuit experiments and how to operate virtual experimental equipments such as multimeters, function generators, digital oscilloscopes, DC power suppliers and bread board etc. The proposed virtual laboratory system is composed of important components: Principle Classroom to explain the concepts and theories of electronic and digital circuit operations, Simulation Classroom to provide a web-based simulator to the learners, Virtual Experiment Classroom to provide interactive multimedia contents about the syllabus of off-line laboratory class, Assessment Classroom, and Management System. With the aid of the management System every classroom is organically tied together collaboration to achieve maximum learning efficiency. We have obtained several affirmative effects such as high learning standard, reducing the total experimental hours and the damage rate for experimental equipments.