• Wind and Structures
• /
• 제34권2호
• /
• pp.231-257
• /
• 2022

Transmission lines systems are important components of the electrical power infrastructure. However, these systems are vulnerable to damage from high wind events such as hurricanes. This study presents the results from a 1:50 scale aeroelastic model of a multi-span transmission lines system subjected to simulated hurricane winds. The transmission lines system considered in this study consists of three lattice towers, four spans of conductors and two end-frames. The aeroelastic tests were conducted at the NSF NHERI Wall of Wind Experimental Facility (WOW EF) at the Florida International University (FIU). A horizontal distortion scaling technique was used in order to fit the entire model on the WOW turntable. The system was tested at various wind speeds ranging from 35 m/s to 78 m/s (equivalent full-scale speeds) for varying wind directions. A system identification (SID) technique was used to evaluate experimental-based along-wind aerodynamic damping coefficients and compare with their theoretical counterparts. Comparisons were done for two aeroelastic models: (i) a self-supported lattice tower, and (ii) a multi-span transmission lines system. A buffeting analysis was conducted to estimate the response of the conductors and compare it to measured experimental values. The responses of the single lattice tower and the multi-span transmission lines system were compared. The coupling effects seem to drastically change the aerodynamic damping of the system, compared to the single lattice tower case. The estimation of the drag forces on the conductors are in good agreement with their experimental counterparts. The incorporation of the change in turbulence intensity along the height of the towers appears to better estimate the response of the transmission tower, in comparison with previous methods which assumed constant turbulence intensity. Dynamic amplification factors and gust effect factors were computed, and comparisons were made with code specific values. The resonance contribution is shown to reach a maximum of 18% and 30% of the peak response of the stand-alone tower and entire system, respectively.

• 지질공학
• /
• 제30권3호
• /
• pp.237-251
• /
• 2020

본연구는 H형강 대체 지보재로 개발된 고강도 격자지보재의 성능을 평가하기 위하여 터널에서의 지보재에 대한 구조해석과 계측에 의한 터널 변위와 지중응력 변화를 살펴보았다. 터널 지보재 3차원 비선형 구조해석 결과에 의하면, H형강과 고강도 격자지보재의 하중과 변위 관계는 거의 동일한 거동을 보였으며, 고강도 격자지보재의 최대하중은 H형강보다 1.0~1.2배 크게 나타났다. 터널 지보재 3차원 터널단면해석 결과에 의하면, 축력은 터널 좌측 및 우측 하단부에서 크게 발생했으며 현장시험 계측값과 유사한 경향을 나타냈다. 천단침하 및 내공변위 계측결과에 의하면, 터널 내 강지보(H형강)와 고강도 격자지보 구간의 최종변위량은 1차 관리기준인 23.5 mm 이내의 큰 차이 없이 일정한 값으로 수렴되었다. 지중변위 계측 결과에 의하면, 두 지보재 구간의 최종변화량은 미소한 변위 변화를 보였으나, 1차 관리기준인 10 mm 이내의 일정한 값으로 수렴되었다. 숏크리트 및 강지보 응력 계측 결과에 의하면, 두 지보재 구간의 최종변화량은 미소한 응력 변화를 보였으나, 1차 관리기준인 81.1 kg/㎠과 54.2 tonf 이내의 일정한 값으로 수렴되었다. 결과적으로 강지보재와 고강도 격자지보재가 설치된 터널구간에서 계측 결과는 매우 미미한 차이를 나타냈으며, 이것은 H형강 대신 고강도 격자지보재를 터널에 적용하더라도 구조적으로 충분히 안정성을 확보할 수 있음을 의미한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.157-160
• /
• 2004

Ferroelectric $(Ba_xSr_{1-x})TiO_3$ (BST) thin films have been deposited on (001) MgO single crystals by a pulsed laser deposition (PLD) method. The structure of deposited BST thin films were investigated by an x-ray diffractometer. Calculated c-axis lattice parameters of the BST films exhibit a strong lattice distortion, which was not observed in ceramic BST at room temperature. This lattice distortion of BST has been attributed to strains caused by lattice constant difference between film and substrate, oxygen vacancies in BST film, and thermal expansion difference between film and substrate. Ferroelectric properties at 10 GHz have been measured using a HP 8510C vector network analyzer. Dielectric properties, capacitance tunability and quality factor, of the interdigitaed capacitors fabricated on BST films were calculated from the measured s-parameters. Two distinct behaviors in structural, opitical, and microwave properties of BST films were observed; below and above 200 mTorr of oxygen pressure in the deposition chmber.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.600-608
• /
• 1996

리튬 이온이 intercalation되어 스핀넬 구조를 이루고 있는 $Li_{x}Mn_{2}O_{4}(0.2{\leq}x{\leq}2.0)$의 구조적 특성을 X-선 회절분석과 Li/1M $LiClO_{4}$-propylene carbonate solution/$Li_{x}Mn_{2}O_{4}$ 전지에서 이들의 구조적 특징에 의한 전기화학적 특성을 연구하였다. $Li_{x}Mn_{2}O_{4}$의 전기화학적 특성에 대한 조성과 반응온도의 영향은 상전이 현상과, 결정 상수 측정과 열분석에 의하여 연구하였다. 산처리 후 $Li_{x}Mn_{2}O_{4}$는 거의 순수한 ${\lambda}-MnO_{2}$구조로 상전이 되었으며 이때 격자상수 $a_{c}$가 8.255에서 $8.031\;{\AA}$으로 수축되었다. $Li_{x}Mn_{2}O_{4}$의 조성 범위가 $0.2{\leq}x{\leq}0.6$일 때 격자상수 $8.255\;{\AA}$의 단일상을 나타내며 3.9~3.7 V의 전위 평탄 영역을 나타낸다.

• Journal of Magnetics
• /
• 제3권1호
• /
• pp.1-3
• /
• 1998

Valence state of the Sm metal is investigated using the total energy linearized muffin-tin orbital (LMTO) band method for the observed Sm-type crystal structure. We have considered both the relativistic and the semi-relativistic description of 4f-core electrons. We have found that, in the paramagnetic phase of bulk Sm, the trivalent valence state is more stable at the observed lattice constant than the divalent valence state.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.894-896
• /
• 2001

The Polypropylene films which are made by refinement of its pellet and formed as crystals are exposed to Radiation. As the results, degradation effects were observed in non-crystalline regions. It is thus considered that the effects occur by destroying of lattice binding force by Radiation. The distribution of degradation was increased with irradiation quantities of Radiation and dielectric constant of Polypropylene sheets irradiated Radiation was rapidly increased from above 10 MHz.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.199.1-199.1
• /
• 2014

In nonlinear optics, the properties of nonlinear optical responses such as polarization and nonlinear analysis of the nonlinear surfaces were investigated using the jellium model by optical second harmonic generation. The nonlinear response of the Al metal surfaces were calculated using TDLDA. Band structure, lattice constant and bulk modulus of the Al metal were investigated. Effective potential and electron density were compared by changing different.

• 한국세라믹학회지
• /
• 제11권3호
• /
• pp.14-18
• /
• 1974

Magnesite single crystals up to 250 microns were synthesized from an equi-molar solution of MgCl2 and Na2CO3 in the micro-autoclave at 180-20$0^{\circ}C$. The lattice constant of synthetic magnesite was obtained a=4.6369(7), c=15.0230(10)A.U. by a least squares analysis based on the UNICS Program (Sakurai 1967) was applied to 28 reflections. Results of X-ray powder diffraction and of DTA, TGA, IRA, and EPMA studies indicate that synthesized magnesite has properties to those of natural magnesite.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.329-330
• /
• 2008

We experimentally demonstrate resonant-wavelength control of a series of an Si-based photonic crystal nanocavity. The cavities show a linear dependence on these parameters, a 1 nm increase of lattice constant leading to 4.2 nm increase of the resonant wavelength. The results have a small standard deviation of wavelength 1.1 nm between samples on a single chip.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.309.2-309.2
• /
• 2008