• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.162-167
• /
• 2003

The critical current value of Bi-2223/Ag tape can be influenced by various factors. In particular, it was known that properties of precursor powders could affect the formation of Bi -2223 and grain growth rate of the same. Since, moistures and organic matters can easily contaminate the precursor powders of Bi-2223 tapes and degrade properties of superconductors, the precursor powders should be kept in optimal conditions to minimize contamination. In this study, the effect of moisture and organic matters has been investigated. A Bi-2223/Ag tape contaminated with a large amount of moisture and organic matter has been characterized by low critical current values and bubbling. It has been found that as the quantity of moisture increases, the Bi-2223 phases are formed at lower temperature and the amount of non-superconducting phase increases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.527-530
• /
• 2002

A lot of efforts have been focused on the optimization of PIT parameters for Bi-2223/Ag wire. In this paper, initial annealing of Bi-2223/Ag wire to transform Bi-2212 orthorhombic from Bi-2212 tetragonal Precursor was investigated. This initial annealing step at low oxygen partial pressure were to transform Bi-2212 orthorhombic structure and to reduce the formation of second phases at superconducting wire. However Bi-2223 Phases were appeared at higher annealing temperature. Critical currents(Je) of Bi-2223/Ag tapes were sintered at low oxygen Partial pressure were higher than that of the wires sintered at atmosphere condition. In order to investigate the effect of rolling reduction ratio, Bi-2223/Ag HTS tapes were rolled with different reduction ratio. There were no clear difference of Je and filaments shape with various rolling reduction ratio.

• 한국재료학회지
• /
• 제6권7호
• /
• pp.684-691
• /
• 1996

Bi-계 고온초전도체인 Bi2Sr2Ca2Cu3O10(Bi-2223)단일상을 반응시간을 줄이면서 합성하기 위하여 Bi-Sr-Ca-Cu-O계 내에 존재하는 Bi2Sr2Ca2Cu3O10(Bi-22o1), Bi2Sr2Ca2Cu3O10(Bi-2212), (Ca0.91Sr0.09)-CuO2의 혼합물, 특히 정확한 Bi1.7Pb0.4Sr2Ca2Cu3O10+x의 조성대신 (Ca0.91Sr0.09)CuO2가 많이 첨가된 조성의 혼합물에서 Bi-2223가 가장 쉽게 형성되었다. Bi-2223상은 86$0^{\circ}C$와 87$0^{\circ}C$에서 60시간 이내에 형성되었다. 소량의 Bi-2212상은 장시간의 반응후에도 여전히 존재하였다. 중간화합물을 이용한 합성방법이 통상의 소결방법에 비해 반응시간내에 소량의 불순물상들을 가진 Bi-2223상을 형성시킬 수 있다.

• 한국전기전자재료학회논문지
• /
• 제11권11호
• /
• pp.1028-1034
• /
• 1998

Bi-2223 superconductor is known as one of the candidates for practical superconducting wires. Ag-sheathed Bi-2223 superconducting wires were fabricated using the powder-in-tube(PIT) method. When the 19-filaments wire was immersed in liquid nitrogen(77K), maximum critical current density Jc of 62 A/$mm_2$ at 0T was achieved. The critical current density has been shown to depend on the mechanical properties such as tensile stress and bending strain in Ag-sheathed Bi-2223 superconducting wires. The tensile strain for Jc degradation onset was in the range of 0.12~0.3%. In the case of 19-filaments wire, the bending strain is estimated to be smaller than 0.3% for the reasonable Jc value. The observed degradation of the critical current density due to strain effect is inevitable and can be attributed to the formation of microcracks within the superconducting core.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 초전도 자성체
• /
• pp.17-20
• /
• 2002

The effects of relatively low lead content (0.2~0.3) on the 2223 phase formation and transport property of Bi-2223/Ag tapes have been investigated. The results show that lead contents have great impact on the phase assemblage of precursors, subsequently, on the phase formation and transport property of silver sheathed BSCCO-2223 tapes. Powders containing Pb=0.25 and Pb=0.3 resulted in the nearly identical $J_c$ values in fully processed tapes, but leaded to significant difference on the phase formation process. For the case of Pb=0.2, both low conversion fraction of 2212 to 2223 and low $J_c$ value were obtained in final reacted tape, which was probably due to lack of enough liquid phase to facilitate the phase transformation.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.124-128
• /
• 2005

Homogeneous and fine powders for Bi-2223 tape were prepared by ultrasonic spray pyrolysis (SP) method from an aqueous solution of metal nitrates. Bi-2223 precursor powders were synthesized with various solutes concentration and pyrolysis temperature. The synthesized precursor powders had a narrow particle size distribution and an average particle size was $\~{\cal}um$. The reactivity of precursor powder by SP method is very high, attributed to the fine and narrow particle size distribution. Bi-2223/Ag tape was prepared using PIT method and followed by various sintering conditions. The precursor powder by SP method promoted a very quick formation of the Bi-2223 phase for short sintering time while the secondary phase such as large AEC phase and $Ca_2PbO_4$ were minimized for SP tapes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.551-554
• /
• 2004

Bi-2223 HTS tapes are used widely for application of superconducting power systems. However there are need the properties of high strength and low AC loss. Two kinds of Bi-2223 HTS tapes with different Ag sheath were used to know the effect of sheath alloying for the strength and the resistivity. The workability and reaction degree of superconducting phase at Bi-2223 HTS tapes were investigated. We designed conventional type-Ag/alloy and double sheathed mono filament type-Ag/alloy/alloy in order to increase the strength and resistivity of matrix in Bi-2223 HTS tapes. The effect of axial strain and thermal cycling on the critical current was investigated for the Bi-2223 HTS tapes. Because the workability of double sheath Bi-2223 HTS tape was lower than one sheath Bi-2223 HTS tape, it was need additional softening treatment. Bi-2223 formation reaction was decreased by Ag alloy matrix during sintering process. Two kinds of Bi-2223/Ag tapes with different Ag sheath were used to know the effect of sheath alloying for the tensile strain. Critical current is drastically decreased for Ag/alloy and Ag/alloy/alloy sheathed tapes at tensile strain above 0.24 % and 0.34 %, respectively. This result showed that mechanical strength was increased over than 40 % by introduce double sheath at mono filament stage.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.140-144
• /
• 1997

은 튜브에 장입되기 전의 초기 분말의 입자 크기가 Ag/Bi-2223초전도 선재의 미세구조와 상전이, 임계 전류 밀도등에 미치는 영향에 대해 고찰하였다. 분말의 입자 크기는 하소 분말을 볼밀을 이용하여 0-48 시간 동안 분쇄하여 조절하였다. 열처리 후 최종 초전도 선재의 전기적 성질은 초기 분말의 입자 크기에 영향을 받는 것으로 나타났으며 분말의 분쇄에 의한 반응성의 증가에 의해 열처리시 2223 상으로의 상전이가 빠르게 일어났고 이차상의 크기와 분율이 감소된 미세구조를 얻을 수 있었다. 그러나 과다한 분쇄에 의한 반응성의 증가에 의해 열처리시 2223상으로의 상전이가 빠르게 일어났고 이차상의 크기와 분율이 감소된 미세구조를 얻을 수 있었다. 그러나 과다한 분쇄는 분말의 비정질화를 유발하여 2223 상으로의 전이를 방해함으로써 선재의 임계 전류 밀도를 감소시키는 결과를 나타내었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.536-539
• /
• 2007

BSCCO 박막은 다양한 기판온도와 산화 가스압에 변화에서 증발법에 의해 제작되었다. 박막조성을 Bi2212 또는 Bi2223으로 설정했음에도 불구하고, 어느 경우나 Bi2201, Bi2212 및 Bi2223상이 생성되었다. 이들 안정상의 생성 영역은 기판 온도-산화 가스압의 Arrhenius 플롯에서 우측 하단 방향으로 경사진 직선으로 표시되며 매우 좁은 영역에 분포되어 있다. 생성막의 XRD 피크는 기판 온도에 따라 연속적으로 변화했다. 이는 Bi2201, Bi2212, Bi2223의 각상이 결정 구조 내에 혼합되어 있는 혼합 결정계의 존재를 나타내고 있으며, 각 상의 단상막은 매우 좁은 온도, 가스압 범위에서만 생성되었다.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.176-179
• /
• 2003

A lot of efforts have been focused on the optimization of PIT parameters for Bi-2223/Ag wire. Bi-2223 superconducting wires with 55 filaments were fabricated by stacking, drawing process. Before rolling process, round wires were pre -annealed at 760 - 820 $^{\circ}C$ and low oxygen partial pressure. We confirmed that pre-annealing step was to transform Bi-2212 orthorhombic structure from Bi-2212 tetragonal structure and to reduce the formation of second phases. However Bi-2223 phases also were formed at higher than 76$0^{\circ}C$ of pre-annealing temperature. The engineering critical current densities (Je) of Bi-22231Ag tapes were sintered at low oxygen partial pressure were higher than t hat of the wires sintered at air. We could achieve 6500 A/${cm}^2$ of Je for the tape that was initially kept at slightly higher temperature than that of normal heat treatment.