• The Journal of Advanced Prosthodontics
• /
• v.10 no.6
• /
• pp.401-407
• /
• 2018

PURPOSE. When performing an occlusal procedure, it is recommended that the patient should be sitting straight with the head in a natural position. An inappropriate mandibular position caused by an incorrect occlusal record registration or occlusal adjustment can result in damaged teeth and cause functional disorders in muscles and temporomandibular joints. The purpose of this study was to clarify the influence of horizontal cephalic rotation on mandibular position by investigating the three-dimensional positions of condylar and incisal points. MATERIALS AND METHODS. A three-dimensional jaw movement measurement device with six degrees of freedom (the WinJaw System) was used to measure condylar and incisal points. The subjects were asked to sit straight with the head in a natural position. The subjects were then instructed to rotate their head horizontally $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, $50^{\circ}$and $60^{\circ}$ in the right or left direction. RESULTS. The results indicated that horizontal cephalic rotation made the condyle on the rotating side shift forward, downward, and toward the inside, and the condyle on the counter rotating side shift backward, upward, and toward the outside. Significant differences in deviations were found for angles of rotation higher than $20^{\circ}$. The incisal point shifted in the forward and counterrotating directions, and significant differences were found for angles of rotation higher than $20^{\circ}$. CONCLUSION. The mandibular position was altered by horizontal cephalic rotations of more than $20^{\circ}$. It is essential to consider the possibility of deviation of the mandibular position during occlusal procedures.

• The korean journal of orthodontics
• /
• v.47 no.5
• /
• pp.277-288
• /
• 2017

Objective: Treating Class II subdivision malocclusion with asymmetry has been a challenge for orthodontists because of the complicated characteristics of asymmetry. This study aimed to explore the characteristics of dental and skeletal asymmetry in Class II subdivision malocclusion, and to assess the relationship between the condyle-glenoid fossa and first molar. Methods: Cone-beam computed tomographic images of 32 patients with Class II subdivision malocclusion were three-dimensionally reconstructed using the Mimics software. Forty-five anatomic landmarks on the reconstructed structures were selected and 27 linear and angular measurements were performed. Paired-samples t-tests were used to compare the average differences between the Class I and Class II sides; Pearson correlation coefficient (r) was used for analyzing the linear association. Results: The faciolingual crown angulation of the mandibular first molar (p < 0.05), sagittal position of the maxillary and mandibular first molars (p < 0.01), condylar head height (p < 0.01), condylar process height (p < 0.05), and angle of the posterior wall of the articular tubercle and coronal position of the glenoid fossa (p < 0.01) were significantly different between the two sides. The morphology and position of the condyle-glenoid fossa significantly correlated with the three-dimensional changes in the first molar. Conclusions: Asymmetry in the sagittal position of the maxillary and mandibular first molars between the two sides and significant lingual inclination of the mandibular first molar on the Class II side were the dental characteristics of Class II subdivision malocclusion. Condylar morphology and glenoid fossa position asymmetries were the major components of skeletal asymmetry and were well correlated with the three-dimensional position of the first molar.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.130-134
• /
• 1997

The sagittal split ramus osteotomy(SSRO) of the mandible has used one of the most popula methods for the correction of various dentofacial deformities, especially mandibular prognathism. In SSRO, there are produced bony gap following mandible setback because of mandibular flaring. For this reason, the condylar axis may be changed due to bony approximation both segment in three dimension more mesio-laterally. According to change of condylar position, the condition of TMJ structure are changed and change of TMJ symptoms are suggested theoretically, and the correction of malocclusion by SSRO may improve the TMJ symptoms by improvement of feeding difficulties. The pupose of this study was to determine relationship between expected alterations in condylar position and suggested TMJ symptoms produced by change of condylar position. TMJ symptoms of 15patients who had operated SSRO are checked at about postoperative 6 month ranging $5{\sim}11$ month. Anterior-posterior position of condyle which was comparison preoperative with postoperative position, was classified 5 groups. The author tried to identify relationship between positional change of condyle and TMJ discomfort.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.13.1-13.8
• /
• 2018

Background: We evaluated change in the mandibular condyle after orthognathic surgery using cone-beam computed tomography (CBCT) in patients with facial asymmetry. Methods: Thirty patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry were classified into two groups according to the amount of menton deviation (MD) from the facial midline on anteroposterior (AP) cephalogram: group A (asymmetry, MD ≥ 4 mm; n = 15) and group B (symmetry, MD < 4 mm; n = 15). Position and angle of condylar heads on the axial, sagittal, and coronal views were measured within 1 month preoperatively (T0) and postoperatively (T1) and 6 months (T2) postoperatively. Results: On axial view, both groups showed inward rotation of condylar heads at T1, but at T2, the change was gradually removed and the condylar head returned to its original position. At T1, both groups showed no AP condylar head changes on sagittal view, although downward movement of the condylar heads occurred. Then, at T2, the condylar heads tended to return to their original position. The change in distance between the two condylar heads showed that they had moved outward in both groups, causing an increase in the width between the two heads postoperatively. Analysis of all three-dimensional changes of the condylar head positions demonstrated statistically significant changes in the three different CBCT views in group B and no statistically significant changes in group A. Conclusions: There was no significant difference between the two groups in condylar head position. Because sagittal split ramus osteotomy can be performed without significant change in symmetrical and asymmetrical cases, it can be regarded as an effective method to stabilize the condylar head position in patients with skeletal class III malocclusion and mandibular prognathism or facial asymmetry.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.5
• /
• pp.316-323
• /
• 2009

Purpose: This study was performed to evaluate three-dimensional positional change of the condyle using 3D CT after bilateral sagittal split ramus osteotomy (BSSRO) in skeletal class III patients. Patients and methods: Nine patients who underwent BSSRO for mandibular set-back in skeletal class III malocclusion without facial asymmetry were examined. Miniplates were used for the fixation after BSSRO. 3-D CT was taken before, immediately after, and 6 months after undergoing BSSRO. After creating 3D-CT images using V-works $4.0^{TM}$ program, axial plane, coronal plane, & sagittal plane were configured. Three dimensional positional change, from each plane to the condyle, of the nine patients was measured before, immediately after, and 6 months after undergoing BSSRO. Results: 1. The mean value of mandibular set-back for nine mandibular prognathism patients was 7.36 mm (${\pm}\;2.42\;mm$). 2. In the axial view, condyle is rotated inward immediately after BSSRO (p < 0.05), comparing with preoperative but outward 6 months after BSSRO comparing with postoperative (p < 0.05). 3. In the axial view, condyle is moved laterally immediately after BSSRO (p < 0.05), comparing with preoperative but regressed 6 months after BSSRO comparing with preoperative (p > 0.05). 4. In the frontal & coronal view, there is changed immediately after and 6 months after BSSRO, comparing with preoperative but no statistical difference. Conclusion: These results indicate that three-dimensional positional change of the condyle in skeletal class III patients is observed lateral displacement & inward rotation immediate after BSSRO, but the condyle in 6 months after BSSRO tends to regress to preoperative position.

• The korean journal of orthodontics
• /
• v.22 no.2 s.37
• /
• pp.345-372
• /
• 1992

The purpose of this experiment was to study the effects of changes of mandibular position on temporomandibular joint in internal derangement patients Twenty-four female New Zealand White Rabbits, weighing over 3.5kg, were utilized in this study . Bilateral temporomandibular joint surgery was performed in twenty-one of the rabbits to displace disc anteriorly through incising the retrodiscal tissue 1-2mm posterior to the disc, thus inducing internal derangement. They were divided into three groups nine were left untreated after surgery, six were fitted with functional protrusive appliances 4 weeks after surgery, and six wore collar appliances to apply 4 ounces of mandibular refractive force per side 4 weeks after surgery. The remaining three served as the control group. Histologic examinations were performed after sacrificing them by threes at 4-week intervals. The results were as follows. 1. Histologic findings similar to internal derangement were observed in the rabbits whose retrodiscal tissues had been incised. 2. In the rabbits untreated after surgery, articular surface on condylar process and articular eminence showed severe erosion and deformation, and displaced disc manifested changes in both shape and internal architecture. 3. Functional protrusion after surgery resulted in progressive remodeling on postero-superior portion of condyle and glenoid fossa, while it also brought about erosion on articular eminence and anterior portion of condyle. 4. Mandibular retraction after surgery resulted in compression of retrodiscal tissue and regressive remodeling of posterior portion of condyle.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.24.1-24.7
• /
• 2016

Background: This study aimed to evaluate the structural changes of temporomandibular joint immediately after condylar fractures with magnetic resonance imaging (MRI). Method: We evaluated 34 subjects of condylar fractures with MRI. The position, shape, and signal intensity of the condyle, disc, and retrodiscal tissue were analyzed with MR images. Results: Immediately after trauma, the disc was displaced with the fractured segment in almost all cases. And, the changes of signal intensity at the retrodiscal tissue were found but less related to the degree of fracture displacement. And, the high signals were observed almost at all fractured joint spaces and even at some contralateral joints. Conclusions: The displaced disc as well as the increased signal intensity of the joint space, condylar head, and retrodiscal tissue demands more attention to prevent the possible sequela of joint.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.587-620
• /
• 1994

This study was aimed to evaluate the changes in condylar position when severe anterior open bite patients were treated with MEAW. The subjects consisted of 11 patients(21 TMJs) who visited the departement of orthodontics in SNUH, having severe anterior open bite as a chief complain. They were supposed to wear the up and down elastics and MEAW after finishing the leveling. The condylar position was evaluated with individualized corrected tomography in centric occlusion taken before and after treatment. The results were as follows; 1. In the change of condylar position after treatment, there were no statistically significant differences in right and left TMJs. 2. In the change of condylar position after treatment, there were no statistically significant differences in each malocclusion groups. 3. There were no statistically significant differences in percent dispacement of condyle between before and after treatment 4. There were no statistically significant differences in the amount of change in condylar change.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.14 no.1
• /
• pp.61-69
• /
• 1984

For the study of the temporomandibular joint in rheumatoid arthritis 30 patients were selected who were diagnosed as rheumatoid arthritis through the clinical, radiographic examination and laboratory findings. Temporomandibular joint involvement was evaluated through the clinical, radiographic examination. The results were as follows; 1. TMJ was involved in 15 patients of 30 patients with rheumatoid arthritis. (50% involvement). 2. Duration of rheumatoid arthritis was more longer in patients with TMJ involvement than in patients without TMJ involvement. 3. Osseous changes in TMJ were in order of frequency erosion, flattening, osteophyte, sclerosis, deformity, and most common involved site was mandibular condyle. 4. Most common positional change of condyle was forward position in centric occlusion, and restricted movement of condyle in 1inch mouth opening. 5. TMJ involvement of rheumatoid arthritis was almost bilateral. 6. Main symptoms of TMJ were pain, stiffness, tenderness, limitation of mouth opening, crepitation 7. There was not the case of ankylosis. 8. There was statistically insignificant correlation between mandibular deviation and TMJ involvement, but some cases showed severe deviation on mouth opening.

• Journal of Korean Dental Science
• /
• v.14 no.2
• /
• pp.110-117
• /
• 2021

Purpose: The purpose of this article is to study the relationship of unintentionally extended split in the distal segment during the bilateral sagittal split ramus osteotomy (BSSRO) and skeletal relapse. Materials and Methods: Twenty patients with mandibular prognathism were divided into two groups according to whether or not unintentionally extended split had occurred. Cone-beam computed tomography images were taken before surgery (T0), immediately after surgery (T1), and postoperatively at 6 months (T2). The stability was evaluated by measuring the change of Nasion perpendicular-Pogonion (N-Pog) distance. Result: Both groups showed mild advancement of Pog during follow-up. In both groups, the condyle head rotated inward and moved posterioinferiorly after surgery, but tended to return to their original position during follow-up. Conclusion: There was no statistically significant difference between the two groups in mandible position. Moreover, the condylar position was stable. If it is difficult to proceed reduction of the unintentionally extended split, careful inspection should be performed to prevent subsequent complications during follow-up.