• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.112-128
• /
• 2018

We are implementing pedestrian priority zone policy to certain districts to reduce greenhouse gas and to develop eco-friendly city which has more focus on pedestrians' walking environment. This policy has contributed to citizens' satisfaction level with improved public transportation service as well as more spacious streets for walk. Despite highly positive influence of pedestrian priority zone policy to the walking environment, we need to anticipate the impact of this to traffic environment as it may have bad effect to the overall traffic flow around the zone where the policy is implemented. This research has analyzed the change of characteristics of traffic accidents around the eco-traffic area of Hang-Gung dong, Suwon city, to understand impact of the pedestrian priority zone policy to the traffic surroundings, with pre-post analysis methodology. As a result, number of accidents related to pedestrians showed decrease as pedestrian priority zone is designed operated with focus to pedestrians. But accidents related illegal U-turn and violation of the traffic signal showed (significant) increase as there was a restriction of turns and decrease of overall traffic speed. To prevent the accidents above, we need to notice drivers to pay special attention before the pedestrian priority zone event, and information from this research should be given to the drivers through safety signs and mobile application at the place near to the event.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.833-840
• /
• 2024

According to recent data from the Korea Meteorological Administration(KMA), the frequency of typhoons around the Korea Peninsula is almost unchanged, but the intensity is on the rise due to climate change. A typhoon that has become so powerful can cause partial or complete damage to the traffic signal structures, limiting the operation of the vehicle and causing traffic congestion. If the traffic signal structure fails to function properly due to the influence of the typhoon, not only the v ehicle operation will be disrupted, but also direct damage to the traffic signal structure will occur. In addition, if the social overhead cost of traffic congestion is included, the recovery cost caused by the typhoon will increase to an extent that it is difficult to estimate. Therefore, in this study, a wind tunnel experiment was performed by producing a wind tunnel model of an existing fixed traffic signal structure and a traffic signal structure in which signs and traffic lights are hinged. Also, The fixed and hinge structures were modeled as 3D finite elements, and wind-resistant analysis was performed by wind speed, and, wind-resistant safety of traffic signal structures were analyzed and examined through wind-resistant analyses. From the comparative analysis of the results of experiment and FE analysis, it was known that the stress reduction rate of the hinge connection structure was at least 30% compared to that of the fixed connection structure from the results of the wind tunnel experiment and FE analysis. And As a result of finite element analysis for the maximum design wind speed of 50m/s, it was found that the maximum stress generated in the existing structure exceeded all the yield stress, but the maximum stress of the hinge connection structure was within the yield stress. Finally The hinge connection structure showed a relatively large stress reduction rate as the wind speed increased and the length of the lateral beam was shorter at the same wind speed.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.145-154
• /
• 2006

In the companion paper, the composition and structure of the MATDYMO (Multi-Agent for Traffic Simulation with Vehicle Dynamic Model) were proposed. MATDYMO consists of the road management system, the vehicle motion control system, the driver management system, and the integration control system. Among these systems, the road management system and the integration control system were discussed In the companion paper. In this paper, the vehicle motion control system and the driver management system are discussed. The driver management system constructs the driver agent capable of having different driving styles ranging from slow and careful driving to fast and aggressive driving through the yielding index and passing index. According to these indices, the agents pass or yield their lane for other vehicles; the driver management system constructs the vehicle agents capable of representing the physical vehicle itself. A vehicle agent shows its behavior according to its dynamic characteristics. The vehicle agent contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation is conducted for an interrupted flow model and its results are verified by comparison with the results from a commercial software, TRANSYT-7F. The interrupted flow model simulation is implemented for three cases. The first case analyzes the agents' behaviors in the interrupted flow model and it confirms that the agent's behavior could characterize the diversity of human behavior and vehicle well through every rule and communication frameworks. The second case analyzes the traffic signals changed at different intervals and as the acceleration rate changed. The third case analyzes the effects of the traffic signals and traffic volume. The results of these analyses showed that the change of the traffic state was closely related with the vehicle acceleration rate, traffic volume, and the traffic signal interval between intersections. These simulations confirmed that MATDYMO can represent the real traffic condition of the interrupted flow model. At the current stage of development, MATDYMO shows great promise and has significant implications on future traffic state forecasting research.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.125-135
• /
• 2004

The validity of simulation has been well-established for decades in areas such as computer and communication system. Recently, the technique has become entrenched in specific areas such as transportation and traffic forecasting. Several methods have been proposed for investigating complex traffic flows. However, the dynamics of vehicles and their driver's characteristics, even though it is known that they are important factors for any traffic flow analysis, have never been considered sufficiently. In this paper, the traffic simulation using a multi-agent approach with considering vehicle dynamics is proposed. The multi-agent system is constructed with the traffic environment and the agents of vehicle and driver. The traffic environment consists of multi-lane roads, nodes, virtual lanes, and signals. To ensure the fast calculation, the agents are performed on the based of the rules to regulate their behaviors. The communication frameworks are proposed for the agents to share the information of vehicles' velocity and position. The model of a driver agent which controls a vehicle agent is described in the companion paper. The vehicle model contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation has proceeded for an interrupted and uninterrupted flow model. The result has shown that the driver agent performs human-like behavior ranging from slow and careful to fast and aggressive driving behavior, and that the change of the traffic state is closely related with the distance and the signal delay between intersections. The system developed shows the effectiveness and the practical usefulness of the traffic simulation.

• Journal of Digital Contents Society
• /
• v.8 no.1
• /
• pp.69-76
• /
• 2007

The blocking of malicious traffic in groupware network system is used to prevent the spread and distribution of malicious traffic. The method protecting from malicious traffic in groupware system is designed to handle the malicious traffic of various routes with the internal course of groupware, which leads to lighten the load of security and traffic. It was impossible to block this kind of traffic at the traditional structure. When the protection of the proposed groupware system is performed, there appears to be a great change for the rate of a load factor at the CPU of Backbone Switch which is connected to the internal gateway. The load factor of CPU, which was increased with the traffic, is now remarkably reduced after the internal gateway is set up. This is to show that a lot of malicious traffic pass through the internal network and that network environment is faced to the menace of many malicious traffics. This paper is to show the efficiency of protection of internal gateway proposed in this study, for the rate of CPU of Backbone Switch was about 17% a day, but was dropped up to the 4% after the malicious traffic was removed.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.101-111
• /
• 2012

PURPOSES: Because expressway ramps are very complex segments where diverse roadway design elements dynamically change within relatively short length, drivers on ramps are required to drive their cars carefully for safety. Especially, ramps on expressways are designed to guarantee driving at high speed so that the risk and severity of traffic accidents on expressway ramps may be higher and more deadly than other facilities on expressways. Safe deceleration maneuvers are required on off-ramps, whereas safe acceleration maneuvers are necessary on onramps. This difference in required maneuvers may contribute to dissimilar patterns and severity of traffic accidents by ramp types. Therefore, this study was aimed at developing prediction models of the severity of traffic accidents on expressway on- and off-ramps separately in order to consider dissimilar patterns and severity of traffic accidents according to types of ramps. METHODS: Four-year-long traffic accident data between 2007 and 2010 were utilized to distinguish contributing design elements in conjunction with AADT and ramp length. The prediction models were built using the negative binomial regression model consisting of the severity of traffic accident as a dependent variable and contributing design elements as in independent variables. RESULTS: The developed regression models were evaluated using the traffic accident data of the ramps which was not used in building the models by comparing actual and estimated severity of traffic accidents. Conclusively, the average prediction error rates of on-ramps and offramps were 30.5% and 30.8% respectively. CONCLUSIONS: The prediction models for the severity of traffic accidents on expressway on- and off-ramps will be useful in enhancing the safety on expressway ramps as well as developing design guidelines for expressway ramps.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.25-37
• /
• 2020

As social costs of traffic congestion increase, various studies are underway to predict road speed. In order to improve the accuracy of road speed prediction, unexpected traffic situations need to be considered. In this paper, we propose a road speed prediction scheme considering traffic incidents affecting road speed. We use not only the speed data of the target road but also the speed data of the connected roads to reflect the impact of the connected roads. We also analyze the amount of speed change to predict the traffic congestion caused by traffic incidents. We use the speed data of connected roads and target road with input data to predict road speed in the first place. To reduce the prediction error caused by breaking the regular road flow due to traffic incidents, we predict the final road speed by applying event weights. It is shown through various performance evaluations that the proposed method outperforms the existing methods.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1990.10a
• /
• pp.317-322
• /
• 1990

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.3
• /
• pp.59-73
• /
• 2021

There are many lives lost due traffic accidents, and which have not decreased despite advances in technology. In order to prevent traffic accidents, it is necessary to accurately forecast how they will change in the future. Until now, traffic accident-frequency forecasting has not been a major research field, but has been analyzed microscopically by traditional methods, mainly based on statistics over a previous period of time. Despite the recent introduction of AI to the traffic accident field, the focus is mainly on forecasting traffic flow. This study converts into time series data the records from 1,339,587 traffic accidents that occurred in Korea from 2014 to 2019, and uses the AI algorithm to forecast the frequency of traffic accidents based on driver's age and time of day. In addition, the forecast values and the actual values were compared and verified based on changes in the traffic environment due to COVID-19. In the future, these research results are expected to lead to improvements in policies that prevent traffic accidents.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.94-99
• /
• 2002

The traffic policy of a city in Korea has brought to many traffic problems by putting emphasis on the only side of mobility in the past that the personal transportation was put first in importance more than the public transportation. As the result of this policy, in the process that the traffic policy of large cities in Korea changes into accessibility, it is shown for re-lighting up the development of the public transportation to be going to be able to get many suggestions in searching for the desirable developing direction of the new means of transportation that will arrive at Korea in the future. Especially, compared with the policy of U.S.A. on the traffic plan that has concentrated on the road and the vehicle, and that of Europe that has put first in the walking and the public transportation system, it is considered as an important thing that the lesson is given to us about what is important for the desirable city development. Transportation can be divided into four; a railroad transportation. a road transportation, a marine transportation, and an aerial transportation.