• Journal of Korean Neurosurgical Society
• /
• 제65권6호
• /
• pp.790-800
• /
• 2022

Objective : EID3 (EP300-interacting inhibitor of differentiation) was identified as a novel member of EID family and plays a pivotal role in colorectal cancer development. However, its role in glioma remained elusive. In current study, we identified EID3 as a novel oncogenic molecule in human glioma and is critical for glioma cell survival, proliferation and invasion. Methods : A total of five patients with glioma were recruited in present study and fresh glioma samples were removed from patients. Four weeks old male non-obese diabetic severe combined immune deficiency (NOD/SCID) mice were used as transplant recipient models. The subcutaneous tumor size was calculated and recorded every week with vernier caliper. EID3 and AMP-activated protein kinase α1 (AMPKα1) expression levels were confirmed by real-time polymerase chain reaction and Western blot assays. Colony formation assays were performed to evaluate cell proliferation. Methyl thiazolyl tetrazolium (MTT) assays were performed for cell viability assessment. Trypan blue staining approach was applied for cell death assessment. Cell Apoptosis DNA ELISA Detection Kit was used for apoptosis assessment. Results : EID3 was preferentially expressed in glioma tissues/cells, while undetectable in astrocytes, neuronal cells, or normal brain tissues. EID3 knocking down significantly hindered glioma cell proliferation and invasion, as well as induced reduction of cell viability, apoptosis and cell death. EID3 knocking down also greatly inhibited tumor growth in SCID mice. Knocking down of AMPKα1 could effectively rescue glioma cells from apoptosis and cell death caused by EID3 absence, indicating that AMPKα1 acted as a key downstream regulator of EID3 and mediated suppression effects caused by EID3 knocking down inhibition. These findings were confirmed in glioma cells generated patient-derived xenograft models. AMPKα1 protein levels were affected by MG132 treatment in glioma, which suggested EID3 might down regulate AMPKα1 through protein degradation. Conclusion : Collectively, our study demonstrated that EID3 promoted glioma cell proliferation and survival by inhibiting AMPKα1 expression. Targeting EID3 might represent a promising strategy for treating glioma.

• 한국식품영양과학회지
• /
• 제39권2호
• /
• pp.193-202
• /
• 2010

더덕 70% 에탄올 추출물(CL) 및 그 분획물들(헥산, 클로로포름, 에틸아세테이트, 부탄올 그리고 물)의 in vitro 항산화 효과는 총 페놀 함량, 환원력, ABTS, DPPH 및 ORAC 분석법들로 실험하였다. 더덕 70% 에탄올 추출물의 에틸아세테이트 분획물(CLEA)은 가장 높은 총 페놀 함량을 보여 주었고 그 함량은 22.7 mg/g이었으며, CLEA는 $250\sim1,000\;{\mu}g/mL$에서 0.42~1.27로 뛰어난 환원력을 가지고 있었다. $100\sim400\;{\mu}g/mL$에서 CLEA는 27.7~70.3의 ABTS radical 소거작용을 보여주었으며, $400\;{\mu}g/mL$에서 81.6%로 가장 높은 DPPH radical 소거활성을 나타내었다. CLEA는 가장 높은 $ORAC_{{ROO}{\cdot}}$ 활성을 가졌고, CLEA와 부탄올 분획물은 70% 에탄올, 헥산, 클로로포롬 그리고 물 분획물보다 현저하게 높은 $ORAC_{{ROO}{\cdot}}$ 활성을 나타내었다. CLEA는 CL 70% 에탄올 추출물과 그 분획물들 중 가장 높은 항산화효과를 가지고 있었다. 따라서 고지방식이에 의해 산화적 스트레스가 유발된 동물 모델에 CLEA를 섭취시켰을 때 항산화 유전자 발현 변화를 microarray와 RT-PCR 기법으로 알아보았다. 31개의 항산화 유전자가 발현되었으나 CLEA 섭취에 의해 2배 이상 발현 증가를 보인 항산화 유전자는 없었다. 결론적으로 CLEA는 직접적인 항산화 효과는 있으나 고지방식 이에 의해 유도된 비만 마우스 내에서 항산화 유전자 발현 증가에 의한 간접적인 항산화 효과는 없었다.

• 한국식품영양과학회지
• /
• 제37권9호
• /
• pp.1174-1181
• /
• 2008

열처리 온도를 달리한 마늘의 이화학적 성분 및 항산화활성을 비교하고자 통마늘을 지퍼백에 $400{\pm}20\;g$씩 넣어 60, 70, 80 및 $90^{\circ}C$로 조절한 incubate에 숙성하면서 1, 3, 6일에 시료를 취하여 이화학적 분석을 실시하였으며 각 열수 및 에탄올 추출물의 DPPH에 대한 전자공여능과 환원력을 통하여 항산화활성을 분석하였다. 열처리 온도를 달리하여 숙성한 마늘의 L, a 및 b값 모두 숙성온도가 높을수록 숙성기간이 경과할수록 유의적으로 낮아졌는데, $60^{\circ}C$에서 6일간 숙성한 시료의 b값은 $22.16{\pm}0.76$이었으나 $90^{\circ}C$ 숙성 시료는 $1.35{\pm}0.21$로 급격히 낮아졌다. 전단가의 경우 숙성 초기에는 $90^{\circ}C$ 숙성 시료가 $85.70{\pm}1.44\;cm/kg^2$로 가장 낮았으나 숙성기간이 경과할수록 경도가 증가하여 숙성 6일에는 $411.30{\pm}13.90\;cm/kg^2$으로 증가하였다. 마늘의 pH는 숙성온도가 높을수록 숙성 기간이 경과할수록 산성화되었는데 6일 숙성 후 $60^{\circ}C$와 $90^{\circ}C$ 시료의 pH는 각각 6.12와 3.90으로 큰 차이를 보였다. 총페놀과 플라보노이드의 함량은 숙성온도가 높을수록 숙성 기간이 경과할수록 증가하여 숙성 6일 시료의 경우 $60^{\circ}C$ 숙성 시료에 비하여 $90^{\circ}C$ 숙성 시료에서 총 페놀은 약 3.5배, 플라보노이드는 약 9.1배 더 높은 함량이었다. Total pyruvate의 경우 숙성 온도에 따라 증감의 경향이 서로 상이하여 $60^{\circ}C$와 $70^{\circ}C$ 숙성 시료에서는 숙성기간 1일과 6일을 비교할 때 더 감소하였으나 $80^{\circ}C$와 $90^{\circ}C$ 숙성 시료의 경우 숙성 6일에 오히려 그 값이 유의적으로 증가되었다. DPPH에 대한 항산화활성은 마늘의 숙성 온도가 높을수록, 숙성 기간이 경과할수록, 농도가 진할수록 증가하여 $90^{\circ}C$, 6일 숙성 시료의 항산화활성은 $87.48{\pm}0.20%$로 타 시료의 $43.61{\sim}55.76%$ 보다 월등히 높았고 환원력도 이와 동일한 경향이었다. 이처럼 항산화 활성이 증가하는 것은 마늘의 숙성온도가 높을수록 숙성 기간이 경과할수록 갈변화 물질의 생성이 많아지고, 이에 따라 총페놀과 플라보노이드 함량이 증가하는 것으로 볼 때 마늘 중의 항산화성 갈변 물질의 증가에 기인하는 결과로 판단된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 지능정보연구
• /
• 제21권1호
• /
• pp.47-63
• /
• 2015

지식경영전략은 코드화(Codification) 전략과 대인화(Personalization) 전략으로 대별할 수 있으며(Hansen et al., 1999), 성공적인 지식경영의 도입과 활용을 위한 두 전략의 운영 방안에 대한 연구가 계속되어 왔다. 그리고 지식경영 시스템에 대한 기존 연구는 주로 대기업의 일부 조직에서 활용한 사례를 대상으로 하고 있어, 중소 규모의 기업 전체를 대상으로 하는 연구는 미비한 실정이다. 본 논문은 중소 규모의 기업에 적합한 지식경영 시스템으로 기업용 마이크로블로그를 특정하고, 기업용 마이크로블로그를 활용한 중소기업의 지식경영전략을 코드화 전략과 대인화 전략의 관점에서 검토한다. 지식경영전략과 기업용 마이크로블로그에 대한 선행연구를 통하여 "기업의 성장에 따라 기업용 마이크로블로그의 활용은 코드화 전략에서 대인화 전략 중심으로 변화한다"는 가설을 설정하였다. 이 가설을 확인하기 위하여 창업 초기부터 현재까지 '야머'(Yammer)라는 기업용 마이크로블로그를 사용하고 있는 소규모 기업을 대상으로 사례연구를 진행하였다. 사례연구는 기업용 마이크로블로그의 사용 기간을 창업 '초기', 현재의 조직 형태를 갖추게 된 '중기', 그리고 연구가 진행된 '현재' 등 세 시점으로 나누고 콘텐츠를 분석하는 종단 분석을 실시하였다. 그리고 각 시점별 야머에 등록된 콘텐츠의 커뮤니케이션 유형을 분석하여 사례기업의 기업용 마이크로블로그 사용행태를 분석하고, 지식경영전략의 변화를 확인하는 방법을 사용하였다. 연구의 결과로 소규모 기업에서 지식경영전략의 운영과 그에 적합한 지식경영 시스템의 활용에 대한 실질적인 시사점을 제시하고자 한다.

• 생물정신의학
• /
• 제5권1호
• /
• pp.95-101
• /
• 1998

치매에서의 뇌파 연구는 주로 주파수 분석과 지형화 분석을 이용하여 정량화하는 것을 위주로 진행되어 왔으나, 이러한 선형적 분석은 뇌파와 같이 복잡한 신호를 분석하는 것에는 한계가 있었다. 최근 새로운 패러다임인 카오스 이론에 근거를 두고 뇌파를 비선형적으로 측정하는 방법이 소개되고 있다. 본 연구는 알쯔하이머형 치매 환자의 뇌파 신호를 최대 양수 리아프노프 지수를 이용하여 비선형적으로 분석하는 것이 가능한 가를 알아보고 그 결과를 대조군과 비교해보기 위하여 시도되었다. 3명의 알쯔하이머형 치매 환자와 3명의 대조군에서 뇌파 신호를 받아 디지털화한 후에 비선형 분석법 중 하나인 최대 양수 리아프노프 지수를 산출하였다. 알쯔하이머형 치매군은 전체 15개의 전극 부위 중 8곳의 전극 부위에서 대조군에 비하여 유의하게 낮은 최대 양수 리아프노프 지수를 나타내었다. 각 두뇌 영역별 및 반구별 분석에서도 알쯔하이머형 치매군이 대조군에 비하여 전 두뇌 영역에서 최대 양수 리아프노프 지수가 유의하게 낮았다. 이에 따라 알쯔하이머형 치매 환자의 뇌파를 비선형적 분석하여 조사한 이들 두뇌의 카오스적 성상이 감소되어 있다는 것을 확인할 수 있었다. 이 결과는 향후 뇌파의 비선형적 분석인 리아프노프 지수 산출이 두뇌 기능을 조사하는 데에 유용한 새로운 방법이 될 가능성이 있다는 것을 시사한다.

• 대한교통학회지
• /
• 제24권5호
• /
• pp.35-44
• /
• 2006

여러 나라에서 다양한 감석/가속 성능 곡선이 사용되어지고 있다. 이 성능곡선은 많은 경우에 결정론적 곡선으로서 오르막차로 설계에 사용되어지고 있다. 이 곡선은 실제 운행 중인 트럭이 표준트럭처럼 이상적인 성능을 보인다는 가정 하에 기준화되었고 또한 적용되어지고 있음을 염두 해 둘 필요가 있다. 그러나 많은 경우에 자동차의 노화 혹은 운전자의 가속등판에 대한 무관심으로 오르막화물차는 차량의 성능만큼 혹은 표준트럭의 성능만큼 주행하지 못하게 된다. 본 논문은 이러한 오르막차로에서 주행하는 화물차의 실제 주행특성을 조사하여 오르막차로설계에 사용되고 있는 오르막차로 성능곡선기울기의 확률적 변동성을 검토하였다. 이를 위해 고속도로 요금소에서 계중기를 통과한 트럭의 차종 및 모델조사를 통해 중량/마력비를 산출하였다 그리고 동일차량을 오르막차로 까지 추종하였다 오르막차로에서는 동일차량의 추종을 통해 속도를 조사하였다. 또한 그동안 사용되어졌던 각종 감속/가속 성능곡선을 이용하여 180, 200, 220 Ib/hp 의 세 가지로 구분하고 실제 이에 상응하는 관측된 85%ile 성능곡선의 특성을 비교하였다. 고속도로를 대상으로 한 오르막경사에서의 화물차 추종조사결과 실측된 감속곡선과 가속곡선은 관련기준에서 제시하는 곡선보다 성능이 떨어지는 형태를 보여주었다. 결론적으로 설계 시 기대했던 트럭의 속도를 현재의 오르막차로 시점부와 종점부에서 얻으려면 오르막차로의 시점부에서는 $16.19{\sim}67.94m$의 길이 연장이 필요하며, 오르막차로 종점부에서는 $53.12{\sim}103.24m$의 길이 연장이 필요한 것으로 나타났다.된다 하겠다.시성 그리고 안전성 면에서 아직도 확실한 성과가 나타나지 않고 있으며 특히 Hatfield 사고 이후에 정시성과 신뢰성 저하 그리고 비용증가의 문제는 앞으로 해결되어야 할 과제로 지적되었다. 미치는 것으로 확인되었다. 대구${\sim}$대전 구간의 통행수단 선택모형의 추정결과를 보면 차외시간, 차외비용, 차내시간 통행빈도, 나이(51세 이상 제외), 직업, 가구 전체의 월평균 소득이 지역 간 통행수단 선택에 중요한 영향을 미친다는 사실을 확인할 수 있었다.을 길게 하더라도 치료에 필요한 적정 수준의 체내 요오드량 감소를 달성하기 어려울 것으로 판단된다. 그러나 1주간 엄격한 저요오드식이를 시행한 군에서도 체내 요오드량의 감소가 충분히 감소하는 비율이 여전히 낮기 때문에 엄격한 저요오드식이 방법을 2주간 시행하는 것이 더바람직하리라 기대된다.. 시험관 섭취율에서 $[^{18}F]$FLT는 시간이 지남에 따라 증가하는 양상을 보였고 생체분포 실험에서 주사 후 120분에서 tumor/blood, tumor/muscle, tumor/brain의 비율은 $1.61{\pm}0.34,\;1.70{pm}0.30,\;9.33{\pm}2.22$를 나타내었다. 또한, 양전자방출단층촬영 결과 종양에 국소화된 영상을 얻었다. 결론: $[^{18}F]$FLT의 종양세포 섭취는 정상 뇌에 비해 월등히 높게 나타났으며, 양전자방출단층 촬영 결과는 뇌종양 진단을 위한 방사성의약품으로 유용하게 이용될 수 있을 것으로 기대된다.$[^{11}C]raclopride$의 수용체 결합능의 변화는

• Clinical and Experimental Pediatrics
• /
• 제49권11호
• /
• pp.1158-1166
• /
• 2006

목 적 : 늘어지는 증상을 주소로 신생아 및 소아 중환자실에 입원한 영아들의 임상적, 신경학적, 전기생리학적 소견 및 유전적 진단 결과를 통한 분석을 통해 늘어지는 영아 증후군의 진단적 분류 및 진단 방법에 대한 고찰을 하고자 하였다. 방 법 : 1993년도부터 2005년까지 13년간 서울대학교 병원 어린이병원 신생아 중환자실 및 소아 중환자실에 늘어지는 증상을 주된 주소로 입원한 영아들을 대상으로 하였다. 후향적 의무기록조사를 통해 임상 소견 및 검사 소견들을 조사하였고 최종 진단명을 분류하였다. 결 과 : 늘어지는 증상을 주소로 내원한 영아들은 21명이었다. 최종 진단명은 중추성 기원이 7명(33.3%), 말초성 기원이 11명(52.4%), 나머지 3명은(14.3%) 두 그룹 중 어느 그룹으로도 분류되지 못하였다. 중추성 기원은 저산소-허혈성 뇌증이 3명으로 가장 많았고, 그 외에 Prader-Willi 증후군 2명, 염색체 이상 1명, 일과성 저긴장증 1명이 있었다. 말초성 기원은 myotubular 근병증이 4명으로 가장 많았고, SMA 1형이 3명, 선천성 근긴장성 이영양증 2명, 선천성 근이영양증 1명, 그 외 분류되지 않은 운동신경질환 1명이 있었다. 가족력이 있었던 경우는 말초성 그룹에서만 3명이 있었고, 신경학적 검진 상 근력은 중추성 그룹에서 평균 Grade 3 이상이었고 건반사도 활발하게 나타난 경우가 많아 다른 그룹의 환자들과 차이를 보였다. 검사상의 소견은 근전도 검사에서 말초성 그룹이 66%의 민감도를 보였고 근생검은 말초성 그룹에서 진단적이었다. 중추성 그룹에서 뇌 영상 검사가 진단적이었고 진단율이 높지는 않았지만 Prader-Willi FISH 나 염색체 검사를 통해 진단이 되었던 경우가 있었다. 그외의 분자 유전학적 검사로 확진 가능한 말초성 그룹의 환자들이 있었다. 입원 기간 및 기관 삽관 기간은 말초성 그룹에서 현저하게 길었고, 추적 관찰 시 사망 및 심한 발달 지체의 비율도 말초성 그룹에서 높게 나타났다. 결 론 : 본 연구의 늘어지는 영아들의 임상상을 바탕으로 진단적 분류를 시행하고 각 진단 분류에 유용한 검사를 순서대로 진행시킨다면 효과적인 진단이 이루어질 수 있을 것이다.

• 한국식품영양과학회지
• /
• 제45권7호
• /
• pp.938-947
• /
• 2016

본 연구는 한국 고유 식용 자원인 황칠나무의 잎을 이용한 항산화 효과 및 고혈당으로 인한 신경/뇌신경세포 보호 효과를 알아보고자 실시하였다. 황칠나무 잎 추출물의 총폴리페놀 함량, ABTS와 DPPH 라디칼 소거 활성을 측정하였으며 활성이 가장 높은 80% 에탄올 추출물을 이용하여 극성 정도에 따라 분획을 하였다. 이들 중 ethyl acetate 분획물이 총 항산화력(FRAP assay)과 지질과산화물(MDA) 생성 억제 활성이 다른 분획물에 비하여 유의적으로 높은 값을 나타냈다. 이를 이용하여 신경세포로서의 PC12 세포와 인간 뇌조직 유래 뇌신경세포로서의 MC-IXC 세포에서 $H_2O_2$와 고혈당에 의한 세포생존율을 측정하였고, ethyl acetate 분획물은 산화적 스트레스로부터의 효과적인 세포 보호 효과를 나타냈다. 또한, 뇌신경말단에서 신경전달물질(ACh)의 분해를 유발하는 효소(AChE)의 저해 효과를 측정하였고, ethyl acetate 분획물은 유의적인 AChE 저해 효과를 보였다. 마지막으로 황칠나무 잎 ethyl acetate 분획물의 생리활성 물질을 확인하고자 HPLC 분석을 하였으며, 주요 생리활성 물질은 rutin으로 추정되었다. 이러한 연구 결과를 바탕으로 고려할 때 황칠나무 잎 추출물은 천연 항산화제의 역할을 가지고 있을 뿐만 아니라 이를 통해 산화적 스트레스로부터 뇌신경세포 등을 효과적으로 보호할 수 있으며 더불어 AChE 저해 활성을 통한 인지기능 개선 가능 소재로서 연구될 수 있을 것으로 판단된다.