• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.6
• /
• pp.488-496
• /
• 2004

Oral & Maxillofacial surgery can lead to complications that result in abnormal sensation or movement. Inferior alveolar nerve(IAN) injury can result in dysesthesia, paresthsia of the lower lip and chin, so patients presenting with IAN damage suffer from sensory loss. But diagnosis of the nerve injury is largely limited to the subjective statements made by the patient. Distribution of sympathetic nerves parallels the distribution of the somatosensory nerves. Loss of sensory tone causes a concomitant loss of sympathetic activity, resulting in vasodilation of the cutaneous blood vessels that demonstrates greater heat loss. Digital infrared thermographic imaging(DITI) detects infra-red radiation given off by body. DITI can detect minute difference in temperature from different parts of the body and translates the amount of heat into quantitative data. The area of different temperature correlated with pain or disease can be visualized by corresponding color. The objective of this study was to determine the efficacy of DITI in objectively assessing IAN injury. The 19 normal subjects and the 14 patients underwent DITI scan. The normal subjects received unilateral IAN block anesthesia with 2 ml of 2% lidocaine (IAN bolck group) to evaluate temporary alteration in nerve function. Patient group were patients with unilateral IAN damage (dysesthesia or paresthesia) after surgical treatment(Mn. 3rd molar Extraction, etc.). The surgical procedure performed within 6 months of test. The results were as follows. 1. No significant differences in temperature were found between left and right sides of the lower lip and chin in the control group. 2. Significant temperature differences were found between the anesthetized and non-anesthetized sides of the lower lip and chin in the IAN block group. 3. Significant temperature differences were found between the involved and uninvolved sides of the lower lip and chin areas of the experimental group. The results of the study show that DITI can be an useful and effective means of objectively assessing and visualizing IAN damage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.351-357
• /
• 2001

The rapid formation of a cream line cannot be observed in raw goat's milk standing at a low temperature. Although the poor creaming ability of goat's milk has been considered to be due to the small size of milk fat globules and the lack of euglobulin capable of being adsorbed on milk fat globules, there is much left to study. The present work attempted to elucidate a factor for poor creaming ability of goat's milk. The creaming ability of the experimental milks reconstituted from creams and skim milks separated from cow's milk or goat's milk was measured by the volume of the cream layer and the fat content of bottom layer. The polypeptides composition of the P1 the fraction (i.e., the high molecular weight fraction eluted near the void volume obtained by the gel filtration of whey) and milk fat globule membrane prepared from both milks were compared. It was found that the promotion of creaming originated from goat's skim milk was lower than that from cow's skim milk. The P1 fraction in goat's skim milk was less than that in cow's skim milk. The polypeptide (M.W. $4.3{\times}10^4$), found in the P1 fraction of cow's milk was not found in the P1 fraction of goat's milk. It is suggested that the poor creaming ability of goat milk is caused mainly by the difference from cow milk in the amount and the composition of the P1 fraction.

• Korean Journal of Veterinary Research
• /
• v.50 no.3
• /
• pp.247-251
• /
• 2010

This study compared the instrument performance and tissue healing of a steel scalpel with a $CO_2$ laser in an animal urinary bladder surgery model. Landrace and Yorkshire mixed breed pigs were used. Two symmetrical incisions were made in urinary bladder of each pig. One incision was made on the left side of ventral aspect on urinary bladder using a steel scalpel, while the other incision was performed on the right side using a $CO_2$ laser with an 8W output power. Each instrument was evaluated clinically for speed, ease of incision, and extent of bleeding. At 7 and 21 days after initial wounding, each wound was taken for histological observations. The scalpel was an easier instrument to use in the confines of the urinary bladder tissue, compared with the laser. However, there was no significant difference between the two groups. The amount of bleeding was less in the laser group but the time of the incisions was shorter with the scalpel. Scalpel incisions showed complete restoration of the epithelium and muscularis. On the other hand, the laser incisions showed incomplete restoration of the epithelium and muscularis. However, most of wound healing in the laser incisions was accomplished according to the time lapse. Although the scalpel produced less damage to the urinary bladder tissue and was easier to handle than the $CO_2$ laser, it did not provide hemostasis that was helpful for use on highly vascular tissue. The $CO_2$ laser provided good hemostasis, but delayed wound healing. In conclusion, the $CO_2$ laser provided better hemostasis and better surgical field than the scalpel. The $CO_2$ laser was used effectively in urinary bladder incision.

• Publications of The Korean Astronomical Society
• /
• v.27 no.4
• /
• pp.311-316
• /
• 2012

Lyman break Galaxies are galaxies selected in the rest-frame ultraviolet. But, one important and missing information for these Lyman break galaxies is the amount of dust attenuation. This is crucial to estimate the total star formation rate of this class of objects and, ultimately, the cosmic star formation density. AKARI, Spitzer and Herschel are therefore the major facilities that could provide us with this information. As part of the Herschel Multi-tiered Extragalactic Survey, we have began investigating the rest-frame far-infrared properties of a sample of more than 4,800 Lyman Break Galaxies in the GOODS-North fiels. Most LBGs are not detected individually, but we do detect a sub-sample of 12 objects at 0.7 < z <1.6 and one object at z = 2.0. The ones detected by Herschel SPIRE have redder observed NUV-U and U-R colors than the others, while the undetected ones have colors consistent with average LBGs at z > 2.5. We have analysed their UV-to-FIR spectral energy distributions using the code cigale to estimate their physical parameters. We find that LBGs detected by SPIRE are high mass, luminous infrared galaxies. They also appear to be located in a triangle-shaped region in the $A_{FUV}$ vs. $logL_{FUV}$ diagram limited by $A_{FUV}$ = 0 at the bottom and by a diagonal following the temporal evolution of the most massive galaxies from the bottom-right to the top-left of the diagram. In a second step, we move to the larger COSMOS field where we have been able to detect 80 Lyman break galaxies (out of ~ 15,600) in the far infrared. They form the largest sample of Lyman break galaxies at z > 2.5 detected in the far-infrared. We tentatively name them Submillimeter Lyman break galaxies (S-LBGs).

• Journal of Environmental Health Sciences
• /
• v.24 no.1
• /
• pp.62-69
• /
• 1998

It has been studied that the measurement of odor component emission at confectionery manufacture. The objects of this study were to investigate reduction of offensive odor. The survey effects of odorous materials are presented as follows. The countermeasure of operating process is to minimize sludge sediment in each unit facility. Especially, in summer, we have to clean the sludge frequently, because anaerobic decomposing is likely to occur easily. The sludge or scum from sedimentation tank pond, and floating tank should be treated quickly. We should avoid overloading operation. In the case of overloading, dissolved oxygen should be increased, the quality of wastewater input should be decreased. When dried cakes from condense tank or floating tank are left in treatment plant, we should cover, to prevent diffusion of smell with masking materials. The seasonal condition of operating should be fixed and the kind of coagulants should be changed because the wastewater in each season have different loading rates and organic materials. Odorous materials are very sensitive to the seasonal temperature variation. Especially, when the amount of rainfall is small and the high temperature of maintenance in long periods, air diffusion rate is large, so odorous materials can make great effect on surroundings comparision with other periods. To reduce odorous gas, as short term method, we had better take ceramic addition method. Especially, in summer we should take ceramic addition method. Also, as long term method, the size of wastewater treatment facility is the most important in the normal operating of wastewater treatment facility. But wastewater treatment facilities in this factory are too old, treatment process is old fashion, and the size is too small. So, large wastewater quantity to treat in summer. As results, the expansion of wastewater treatment facility and the process of improvement are required. Restriction level of odor was exceed. As it is overloaded in summer, the basis cause of odor is that the size of wastewater treatment facility is small. The prediction of air quality equilibrium density variation show that the odorous materials from working place are Amine materials whose smell strength is about 2.5(a little strong degree). We can suppose that in summer is sensitive to temperature variation, smell strength is larger as to reduce the origin of odor. We must expand wastewater treatment facility and improve the process A.S.A.P.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.1
• /
• pp.85-92
• /
• 2005

Reconstruction of defect in the anterior part of the maxilla to enable implant placement or prothesis is a complicated treatment due to the anatomical position and lack of soft tissues. Two cases are presented in which autogenous iliac PMCB(particulate marrow and cancellous bone) with titanium mesh were used for premaxilla reconstruction and alveolar bone repair of the anterior maxillas prior to denture and implants fixation respectively. Cancellous bone from the anterior iliac crest was compressed and placed against a titanium mesh fixed to the bone of palate in a patient with severe defect of the anterior maxilla. There were no problem in the healing, and the anterior maxillas of two patients had increased height and width during the initial healing and remodeling. The clinical reports describe the use of titanium mesh for reconstruction of premaxilla. Autogenous bone grafts were harvested from the iliac crest and were loaded on a titanium mesh that were left in the patient's maxilla for 6 months before they were removed respectively. The radiographic analysis demonstrated that a 10mm vertical ridge augmentation had been achieved. In guided bone regeneration, the quantity of bone regenerated under the barrier has been demonstrated to be directly related to the amount of the space under the membrane. This space can diminish as a result of membrane collapse. To avoid this problem which involved the use of a titanium mesh barrier to protect the regenerating tissues and to achieve a rigid fixation of the bone segments, were used in association with autologous bone in 2 cases. The aim of this study was to evaluate the capability of a configured titanium mesh to serve as a mechanical and biologic device for restoring a vertically defected premaxilla.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.5-16
• /
• 2016

This study aims to assess the influence of rainfall patterns on shallow landslides initiation. Doing so, five typical rainfall patterns with the same cumulative amount and intensity components comprising Advanced (A1 and A2), Centralized (C), and Delayed (D1 and D2) were designed based on a historical rainstorm event in Jinbu. Mt area. Those patterns were incorporated as the hydrological conditions into the Transient Rainfall Infiltration and Grid-based Regional Slope-stability Model (TRIGRS) to assess their influences on groundwater pressure and changes in the stability of the slope. The results revealed that not only the cumulative rainfall thresholds necessary to initiate landslides, but also the rate at which the factor of safety decreases and the time required to reach the critical state, are governed by rainfall patterns. The sooner the peak rainfall intensity, the smaller the cumulative rainfall threshold, and the shorter the time until landslide occurrence. Left-skewed patterns were found to have a greater effect on landslide initiation. Specifically, among five rainfalls, pattern (A1) produced the most critical state. The severity of response was followed by patterns A2, C, D1, and D2. Our conclusion is that rainfall patterns have a significant effect on the cumulative rainfall threshold, the build-up of groundwater pressure, and the occurrence of shallow landslides.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3023-3029
• /
• 2012

The purpose of this study was to investigate the effect of the home-based virtual reality (VR) on upper extremity motor function in hemiparetic stroke patients. Two matched subjects with left hemiplegia were volunteered to participate in this study. One subject received the home-based VR whereas the other subject recovered a modified home-based constraint-induced movement therapy (CIMT). Both interventions were given for 4 hours x 5 times a week for 4 weeks. Outcome measures included Fugl-Meyer Assessment (FMA), Motor Activity Log (MAL), and Wolf Motor Function Test (WMFT). The VR-trained subject showed considerable improvement in all the tested motor functions when compared with the home-based CIMT. Specifically, the FMA measure demonstrated that the VR subject showed 17% enhancement whereas the CIMT subject showed 5% increase. Similarly, Amount of Use (AOU) and Quality of Movement (QOM) of the MAL scores of the VR subject showed 40% and 20% increase whereas the CIMT subject showed 0% and 20% increase, respectively. The WMFT scores of the VR subject and CIMT subject showed 20% increase. Our home-based VR was effective in upper extremity motor recovery of chronic hemiparetic patients even when compared with the well-established CIMT approach in stroke victims.

• Archives of Plastic Surgery
• /
• v.42 no.2
• /
• pp.150-158
• /
• 2015

Background Fat is widely used in soft tissue augmentation. Nevertheless, it has an unpredictably high resorption rate. Clinically, external expansion with negative pressure is used to increase fat graft survival. In this study, fat graft recipient sites were preconditioned by external application of negative pressure in order to test for improvements in vascularity and fat graft survival. Methods Negative pressure was applied randomly to either the left or right dorsal ear of 20 New Zealand male white rabbits at a pressure of -125 mm Hg. The negative pressure was removed one week after the skin perfusion was measured. The skin flap at each ear was elevated, and 1 g of fat was grafted above the dorsal perichondrium. After one week, the fat weight, microvessel density, mature vessel density of the skin and fat, and amount of glycerol released were measured. Three months after the grafting, the same measurements were performed, with the exception of glycerol release. Results The fat survival rate of the experimental group ($75.4%{\pm}3.9%$) was higher than that of the control group ($53.1%{\pm}4.3%$) (P<0.001). Skin perfusion was higher in the experimental group. The glycerol release in the experimental group was significantly higher than in the control. The microvessel density of the skin and fat was significantly higher in the experimental group. Three months after the grafting, the skin and fat mature vessel density was significantly higher in the experimental groups. Conclusions Negative pressure prior to fat grafting increased the vascularity of the recipient site, and, accordingly, enhanced fat graft survival.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.22-32
• /
• 2020

The hippocampal volume atrophy is known to be linked with neuro-degenerative disorders and it is also one of the most important early biomarkers for Alzheimer's disease detection. The measurements of hippocampal pure volumes from Magnetic Resonance Imaging (MRI) is a crucial task and state-of-the-art methods require a large amount of time. In addition, the structural brain development is investigated using MRI data, where brain morphometry (e.g. cortical thickness, volume, surface area etc.) study is one of the significant parts of the analysis. In this study, we have proposed a patch-based ensemble model of 3-D convolutional neural network (CNN) to measure the hippocampal pure volume from MRI data. The 3-D patches were extracted from the volumetric MRI scans to train the proposed 3-D CNN models. The trained models are used to construct the ensemble 3-D CNN model and the aggregated model predicts the pure volume in one-step in the test phase. Our approach takes only 5 seconds to estimate the volumes from an MRI scan. The average errors for the proposed ensemble 3-D CNN model are 11.7±8.8 (error%±STD) and 12.5±12.8 (error%±STD) for the left and right hippocampi of 65 test MRI scans, respectively. The quantitative study on the predicted volumes over the ground truth volumes shows that the proposed approach can be used as a proxy.