• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2007

Present tooth bonding system can be categorized into total etching bonding system (TE) and self-etching boding system (SE) based on their way of smear layer treatment. The purposes of this study were to compare the effectiveness between these two systems and to evaluate the effect of number of themocycling on microleakage of class V composite resin restorations. Total forty class V cavities were prepared on the single-rooted bovine teeth and were randomly divided into four experimental groups: two kinds of bonding system and another two kinds of thermocycling groups. Half of the cavities were filed with Z250 following the use of TE system, Single Bond and another twenty cavities were filled with Metafil and AQ Bond, SE system. All composite restoratives were cured using light curing unit (XL2500, 3M ESPE, St. Paul, MN, USA) for 40 seconds with a light intensity of $600mW/cm^2$. Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Half of teeth were thermocycled 500 times and the other half were thermocycled 5,000 times between $5^{\circ}C$ and $55^{\circ}C$ for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}A$) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. From this study, following results were obtained: There was no interaction between variables of bonding system and number of thermocycling (p = 0.485). Microleakage was not affected by the number of thermocycling either (p = 0.814). However, Composite restoration of Metafil and AQ Bond, SE bond system showed less microleakage than composite restoration of Z250 and Single Bond, TE bond system (p = 0.005).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1218-1226
• /
• 2008

With the development of semiconductor integrated technology and with the increasing use of multimedia functions in computer, more functions have been implemented as hardware. Nowadays, most microprocessors beyond 32 bits generally implement an integer multiplier as hardware. However, as for a divider, only specific microprocessor implements traditional SRT algorithm as hardware due to complexity of implementation and slow speed. This paper suggested an algorithm that uses a multiplier, 'w bit $\times$ w bit = 2w bit', to process $\frac{N}{D}$ integer division. That is, the reciprocal number D is first calculated, and then multiply dividend N to process integer division. In this paper, when the divisor D is '$D=0.d{\times}2^L$, 0.5 < 0.d < 1.0', approximate value of ' $\frac{1}{D}$', '$1.g{\times}2^{-L}$', which satisfies ' $0.d{\times}1.g=1+e$, $e<2^{-w}$', is defined as over reciprocal number and then an algorithm for over reciprocal number is suggested. This algorithm multiplies over reciprocal number '$01.g{\times}2^{-L}$' by dividend N to process $\frac{N}{D}$ integer division. The algorithm suggested in this paper doesn't require additional revision, because it can calculate correct reciprocal number. In addition, this algorithm uses only multiplier, so additional hardware for division is not required to implement microprocessor. Also, it shows faster speed than the conventional SRT algorithm and performs operation by word unit, accordingly it is more suitable to make compiler than the existing division algorithm. In conclusion, results from this study could be used widely for implementation SOC(System on Chip) and etc. which has been restricted to microprocessor and size of the hardware.

• Allergy, Asthma & Immunology Research
• /
• v.10 no.6
• /
• pp.648-661
• /
• 2018

Purpose: Pollen-food allergy syndrome (PFAS) is an immunoglobulin E (IgE)-mediated allergy in pollinosis patients caused by raw fruits and vegetables and is the most common food allergy in adults. However, there has been no nationwide study on PFAS in Korea. In this study, we investigated the prevalence and clinical characteristics of PFAS in Korea. Methods: Twenty-two investigators participated in this study, in which patients with allergic rhinoconjunctivitis and/or bronchial asthma with pollen allergy were enrolled. The questionnaires included demographic characteristics, a list of fruits and vegetables, and clinical manifestations of food allergy. Pollen allergy was diagnosed by skin prick test and/or measurement of the serum level of specific IgE. Results: A total of 648 pollinosis patients were enrolled. The prevalence of PFAS was 41.7% (n = 270). PFAS patients exhibited cutaneous (43.0%), respiratory (20.0%), cardiovascular (3.7%) or neurologic symptoms (4.8%) in addition to oropharyngeal symptoms. Anaphylaxis was noted in 8.9% of the PFAS patients. Seventy types of foods were linked to PFAS; e.g., peach (48.5%), apple (46.7%), kiwi (30.4%), peanut (17.4%), plum (16.3%), chestnut (14.8%), pineapple (13.7%), walnut (14.1%), Korean melon (12.6%), tomato (11.9%), melon (11.5%) and apricot (10.7%). Korean foods such as taro/taro stem (8.9%), ginseong (8.2%), perilla leaf (4.4%), bellflower root (4.4%), crown daisy (3.0%), deodeok (3.3%), kudzu root (3.0%) and lotus root (2.6%) were also linked to PFAS. Conclusions: This was the first nationwide study of PFAS in Korea. The prevalence of PFAS was 41.7%, and 8.9% of the PFAS patients had anaphylaxis. These results will provide clinically useful information to physicians.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.4
• /
• pp.359-365
• /
• 1985

The four rice varieties, Kwanak, Nongbaek, Pungsan and Nampung-byo were cultivated to examine the growth conditions and grain yield in a Gyuam SiL paddy field irrigated with cold water around $17^{\circ}C$. Water temperatures for various distances from the inlet were measured. The results were summerized as follows. 1. Culm length, panicle exertion, diameter of the 3rd internode stem, heading date, fertilization rate, ripeness rate, no. of grains per panicle and grain yield were sensitive to water temperature. Panicle length, flag-leaf length, diameter of spike-neck and no. of panicles, however, were negligibly sensitive and there were no differences among varieties. 2. Elongations of the 2nd and 3rd internode steam were unsensitive to water temperature. 1st internode elongation and 4th internode development, however, were sensitive which was major factor in the culm length. 3. Ratios of partial dry weight to total dry weight were closely correlated with water temperature, Therefore, dry weight of grain was increased with water temperature while that of plant and root decreased. 4. Chlorophyll contents were decreased with the increment of water temperature and the highest at $20^{\circ}C$. 5. There was no grain yield at $17^{\circ}C$, Increases of grain yield to water temperature per unit were order at Pungsan > Kwanak > Nongbaek > Nampung. 6. The critical temperature in grain yield was $21^{\circ}C$. Optimum temperatures of Japonica ${\times}$ Indica types were higher than those of Japonica types.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.438-444
• /
• 2023

Italian ryegrass (Lolium multiflorum Lam.; IRG) sowing season is delayed due to the autumn rainy season. Therefore, to address this problem, transplanting date and plant density were investigated. Transplant times investigated were October 20th, October 30th, and November 10th and planting densities were 50, 70, and 80 hills per 3.3 m². The plant height, leaf area index, and plant coverage rate were high in the following order: October 20th, October 30th, and November 10th. There was no significant difference among planting densities. In addition, the number of tillers and dry weight before and after wintering were high on October 20th. In terms of yield components, the number of tillers, dry weight, and seed yield per unit area were higher with the transplanting date of October 20th than with transplanting on November 10th. There was no difference in seed yield between the planting densities of 80 and 70 hills per 3.3 m². However, seed yield was low at 50 hills per 3.3 m². In conclusion, the transplanting time for stable seed production is late October, and optimal plant density is 70 and 80 hills per 3.3 m². A stable interplanting number before wintering will contribute to the seed yield.

• Journal of Applied Biological Chemistry
• /
• v.52 no.1
• /
• pp.8-14
• /
• 2009

This study was conducted to assess the effects of diet food containing Jerusalem artichoke's inulin, lotus leaf, and herb on weight and body fat. Participants in this study were selected based on the following criteria: BMI over $25kg/m^2$, body fat percentage higher than 25%, abdominal obesity level of 0.85 measured by body composition measurement unit (ZEUS 9.9 PLUS, Korea) total 24 female and male university students over 20 of age were assigned to two different groups: control group and diet group and the study was carried out for 30 days. When we measured what the tester's body weight and height, we used an automatic measure machin which is called IMI-1000 from Immanuel company and when we measured what the hip and wist circumference, we used a tape measure. When we measured body mss index (BMI), body Int, body mass, lean mass, waist/hip ratio (WHB), obesity index, we used a ZEUS9.9 PLUS-Korea which is based on bioelectrical impedance analysis, The food intake was checked by means of diet record method to be input into CAN program in order to analyze nutrient intake. Our findings indicated that the diet group, as compared to the control group, lost weight of approximately 2.5 kg and showed statistically significant difference. In addition the level of body Int, muscle, abdominal obesity, obesity, waist and bottom measurement all showed significant decrease after study period. However, there was no big difference in body fat percentage because both body fat level and muscle level dropped together, Putting all these together, diet food in this study containing Jerusalem artichoke's inulin, lotus leaf powder, and herbs powder including nettle, eucalyptus was found to be effective in significant reduction of weight and body fat and obesity-related body indicators. Also, it is considered that this diet food has potential to prevent and improve effectively obesity from abnormal fat accumulation.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.111-119
• /
• 2019

The high-speed railway system is mainly composed of tunnel, bridge, and viaduct to meet the straightness needed for keeping the high speed up to 400 km/s. Seismic fragility for the high-speed railway infrastructure can be assessed as two ways: one way is studying each element of infrastructure analytically or numerically, but it requires lots of research efforts due to wide range of railway system. On the other hand, empirical method can be used to access the fragility of an entire system efficiently, which requires case history data. In this study, we collect the 2004 M_W 6.6 Niigata earthquake case history data to develop empirical seismic fragility function for a railway system. Five types of intensity measures (IMs) and damage levels are assigned to all segments of target system for which the unit length is 200 m. From statistical analysis, probability of exceedance for a certain damage level (DL) is calculated as a function of IM. For those probability data points, log-normal CDF is fitted using MLE method, which forms fragility function for each damage level of exceedance. Evaluating fragility functions calculated, we observe that T=3.0 spectral acceleration (SA_T3.0) is superior to other IMs, which has lower standard deviation of log-normal CDF and low error of the fit. This indicates that long-period ground motion has more impacts on railway infrastructure system such as tunnel and bridge. It is observed that when SA_T3.0 = 0.1 g, P(DL>1) = 2%, and SA_T3.0 = 0.2 g, P(DL>1) = 23.9%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.5
• /
• pp.722-727
• /
• 2010

This study was conducted to estimate the carbon footprint and to establish the database of the LCI (Life Cycle Inventory) for barely cultivation system. Barley production system was separated into the naked barley, the hulled barley and the two-rowed barley according to type of barley species. Based on collecting the data for operating LCI, it was shown that input of fertilizer was the highest value of 9.52E-01 kg $kg^{-1}$ for two-rowed braley. For LCI analysis focussed on the greenhouse gas (GHG), it was observed that carbon footprint were 1.25E+00 kg $CO_2$-eq. $kg^{-1}$ naked braley, 1.09E+00 kg $CO_2$-eq. $kg^{-1}$ hulled braley and 1.71E+00 $CO_2$-eq. $kg^{-1}$ two-rowed barley; especially two-rowed barley cultivation system had highest emission value as 1.09E+00 kg $CO_2$ $kg^{-1}$ barley. It might be due to emit from mainly fertilizer production for barley cultivation. Also $N_2O$ was emitted at 7.55E-04 kg $N_2O\;kg^{-1}$ barley as highest value from hulled barley cultivation system because of high N fertilizer input. The result of life cycle impcat assessment (LCIA), it was observed that most of carbon emission from barely cultivation system was mainly attributed to fertilizer production and cropping unit. Characterization value of GWP was 1.25E+00 (naked barley), 1.09E+00 (hulled barley) and 1.71E+00 (two-rowed barely) kg $CO_2$-eq. $kg^{-1}$, respectively.

• Clinical and Experimental Pediatrics
• /
• v.49 no.5
• /
• pp.500-506
• /
• 2006

Purpose : We evaluated an outbreak of Serratia marcescens infections in 24 neonates in a neonatal intensive care unit(NICU). Methods : From January to August, 2004 a nosocomial outbreak of S. marcescens occurred in our NICU. We describe the clinical characteristics of the outbreak and analyse the risk factors for infections with S. marcescens. After the outbreak stopped, 7 isolates from blood were typed using rapid amplified polymorphic DNA analysis(RAPD). Results : S. marcescens was isolated from 24 neonates, 19 infected and 5 colonized. Seven out of nineteen neonates had bacteremia, 4 had ventilator associated pneumonia, 4 had purulent conjunctivitis, 2 had UTI, 1 had meningitis and 1 had a wound infection. Three neonates died due to S. marcescens infection, 2 of 3 had ventilator associated pneumonia, 1 had meningitis complicated with abscess. The mortality rate of S. marcescens infection was 15.8%. Factors associated with S. marcescens infections were previous antibiotic therapy, indwelling catheter and use of ventilators. The isolated strains were resistant to most antibiotics, but frequently sensitive to imipenem, bactrim and amikacin. RAPD typing results show that at least 3 epidemic strains were related with this outbreak. But one genotype was predominant type in this outbreak. The control measures were instituted and the outbreak stopped within 2 months. Conclusion : S. marcescens can cause rapidly spreading outbreaks associated with fatal infections in neonates. If S. marcescens is isolated from clinical specimens, meticulous infection control measures and epidemiologic investigations should be done at an early stage of the outbreak.

• Journal of Chest Surgery
• /
• v.39 no.8 s.265
• /
• pp.579-587
• /
• 2006

Background: Preoperative risk analysis for Fontan candidates is still less than optimal in that patients with apparently low risks may have poor surgical outcome; prolonged pleural drainage, protein losing enteropathy, pulmonary thromboembolism and death. We hypothesized that low pulmonary vascular compliance (PVC) is a risk factor for prolonged pleural effusion drainage after the Fontan operation. Material and Method: A retrospective review of 96 consecutive patients who underwent the Extracardiac Fontan procedures (median age: 3.9 years) was performed. Fontan risk score (FRS) was calculated from 12 categorized preoperative anatomic and physiologic variables. PVC $(mm^2/m^2{\cdot}mmHg)$ was defined as pulmonary artery index $(mm^2/m^2)$ divided by total pulmonary resistance $(W.U{\cdot}/m^2)$ and pulmonary blood flow $(L/min/m^2)$ based on the electrical circuit analogue of the pulmonary circulation. Chest tube indwelling time was log-transformed (log indwelling time, LIT) to fit normal distribution, and the relationship between preoperative predictors and LIT was analyzed by multiple linear regression. Result: Preoperative PVC, chest tube indwelling time and LIT ranged from 6 to 94.8 $mm^2/mmHg/m^2$ (median: 24.8), 3 to 268 days (median: 20 days), and 1.1 to 5.6 (mean: 2.9, standard deviation: 0.8), respectively. FRS, PVC, cardiopulmonary bypass time (CPB) and central venous pressure at postoperative 12 hours were correlated with LIT by univariable analyses. By multiple linear regression, PVC (p=0.0018) and CPB (p=0.0024) independently predicted LIT, explaining 21.7% of the variation. The regression equation was LIT=2.74-0.0158 PVC+0.00658 CPB. Conclusion: Low pulmonary vascular compliance is an important risk factor for prolonged pleural effusion drainage after the extracardiac Fontan procedure.