• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.68-77
• /
• 2013

This paper presents AUTOSAR-ready light software architecture (AUTOSAR-Lite), which is a light weighted version of the AUTOSAR, for automotive embedded control systems. The proposed AUTOSAR-Lite reduces overhead problems caused by the excessive standard specifications of AUTOSAR. Concurrently, AUTOSAR-Lite keeps advantages of AUTOSAR such as a scalability, re-usability, reliability, and transferability. The fundamental design of AUTOSAR-Lite is originated from the AUTOSAR standard. AUTOSAR-Lite is composed of three layers such as an application software, runtime environment, and basic software layer. The application software layer adopts component-based design methodology as AUTOSAR. The runtime environment layer integrates interfaces between application and basic software layers. In case of the basic software layer, restrictions of the module configurations and interfaces of basic software are minimized. In order to validate the feasibility of AUTOSAR-Lite, a software design result based on AUTOSAR-Lite software architecture for electronic throttle control (ETC) system is suggested.

• 한국IT서비스학회지
• /
• 제16권2호
• /
• pp.111-127
• /
• 2017

Computing Performance, sensor, storage, memory, and network costs have been steadily declining, and IoT services have recently become more active. The Internet of Things is linked with Big Data to create new business, and public institutions and corporations are hurry to import Internet of things. As the importance of the Internet of things has increased, the number of devices supporting the IoT has rapidly increased. With the development of the Internet of Things, various types of Internet services are being developed. For this reason, there is an increasing demand for IoT service designers and developers for IoT service case automatic search technology. IoT service designers can avoid duplication with existing services through service case retrieval and developers can save cost and time by combining existing reusable service equipment. This paper proposes IoT-Lite ontology for IoT and Semantic Web service to solve the above-mentioned problems. The existing ontologies for IoT, despite its many advantages, are not widely used by developers because it has not overcome the relatively slow drawbacks of increasing complexity and searching for development. To complement this, this study uses the IoT-Lite ontology introduced by W3C as a model and a semantic web service for automatic system retrieval. 3D camera, GPS, and 9-axis sensor, and IoT-Lite designed by IoT-Lite technique are integrated with the semantic technique and implemented directly.

• 무역상무연구
• /
• 제30권
• /
• pp.59-88
• /
• 2006

After sources of risks are identical and measured, a decision can be made as to how the risk should be handled. A pure risk that is not identical does not disappear ; the business merely loses the opportunity to consciously decide on the best technique for dealing with that risk. The process used to systematically manage risk exposures is known as risk management. Risk management is the logical process used by business firms and individuals to deal with their exposures to loss. It is a strategy of preloss planning for postloss resources. Besides, in the enterprise judiciary researches the textbook and the instance which relate risks, and reflects it to the written contract provision and various every manuel or holds seminar. It is a risk management which this talks generally. Here it stands but it becomes a problem the quality of type and countermeasure of risks. The purpose of this paper aims to explain adequate preventions to positively predict the risk this before being materialized, in practical section which is directly exposed to these risks in introducing international sale contracts(for example, the FOB and CIF contract) and the active management method of the risk which accompanys to the execution. And also analyzes the Lite-On case which relates with an international sale contracts.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2063_2064
• /
• 2009

Recently, load circuits and components of customer are various. Therefore failures of ELB(Earth Leakage Breaker) and MCCB(Molded case circuit breakers) are more frequent. Lite time of MCCB even if there is same units differ from environment, condition of operation. FEMCA is a efficiency method of system operation or maintenance for system reliability. We study on FMECA procedures and method. In this paper, we focused on FMECA application to MCCB life time test.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.135-147
• /
• 1994

This study was conducted to evaluate whether the fatigue toughness of visible light cured composite resins could be improved and how much percentage of polymerzation shrinkage could be affected by additional heat treatment. 7 materials were investigated for this study: P-50, Lite-fil CR inlay, Pekafil, Clearfil CR inlay, Clearfil photo posterior, Z -100 and Progress. Diametral tensile strengths and linear shrinkages of composite resins were taken under visible light cured and additional post-cure heated condition and compared each other. A fatigue toughness of above materials was evaluated by measuring diametral tensile strength after they were repeatedly loaded with 120kgf/$cm^2$ up to 3000 cycles. The results obtained were as follows : 1. When composite resins were cured just by visible light, Lite fil CR inlay, Z -100 and Progress showed respectively higher diametral tensile strength than the other materials. Clearfil CR inlay, Clearfil photo posterior and Progress exhibited strong fatigue toughness compared to P-50 and Pekafil. 2. Post-cure heat treated composite resins had higher diametral tensile strengths than visible light cured composite resins at fatigue toughness test as well as no fatigue toughness test. 3. When Composite resins were additionally polymerized by post-cure heat treatment, P-50 showed weak fatigue toughness, on the contrary, Clearfil CR inlay, Z-100, Progress showed strong one. 4. When composite resins were cured just by visible light, percentage of polymerization linear shrinkage was the lowerest in Clearfil CR inlay, followed by, in ascending order, Clearfil photo posterior, Lite-fil CR inlay, Progress, Pekafil, P-50, and Z-100. In the case of post- cure heat treated composite resins, percentage of linear shrinkage was the lowest in Clearfil photo posterior, followed by, in ascending order, Lite-til CR inlay, Clearfil CR inlay, Progress, P-50, Pekafil and Z-100. 5. Percentage of polymerization linear shrinkage was greater in the post-cure heat treated composite resins than in the visible light cured composite resins and linear shrinkage increased significantly in Pekafil, Clearfil CR inlay, and Clearfil photo posterior between at the visible light cured and at the post-cure heat treated condition. The above results is saying that additional post-cure heat treatment on the composite resins for posterior restoration is able to affect on improvement of strength and fatigue toughness and lead to increase polymerization of composite resins.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.439-441
• /
• 2009

Recently, load circuits and components of customer are various. Therefore failures of ELB(Earth Leakage Breaker) and MCCB(Molded case circuit breakers) are more frequent. Lite time of MCCB even if there is same units differ from environment, condition of operation. FEMCA is a efficiency method of system operation or maintenance for system reliability. We study on FMECA procedures and method. In this paper, we focused on FMECA application to MCCB life time test.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.117-125
• /
• 2012

This paper describes a model-based software development methodology for AUTOSAR-ready light software architecture(AUTOSAR-Lite). The proposed methodology briefly represents an application software modeling technique using Matlab/Simulink. Using the proposed technique, application software architecture elements (e.g. software components, runnables, and interfaces) and functional behaviors can be designed in a single modeling environment. From the designed model, the codes of application software is automatically generated using Real-Time Workshop Embedded Coder. The generated application software is easily integrated with hand-coded basic software using the proposed method. In order to evaluate the proposed methodology, a diesel engine management system for a passenger car was employed as a case study. Based on the methodology, 8 atomic software components and 52 runnables are successfully developed, and they are evaluated by engine experiments. From this case study, AUTOSAR compatible model-based application software was successfully developed, and the effectiveness of the proposed methodology was evaluated.

• 전기화학회지
• /
• 제7권2호
• /
• pp.83-88
• /
• 2004

[ $DeniLite^{TM}$ ] laccase immobilized Pt electrode was used for amperometric detection of some catechol derivatives and o-aminophenol (OAP) derivative by means of substrate recycling. In case of catechol derivatives, the obtained sensitivities are 85, 79 and $57 nA/{\mu}M$ with linear ranges of $0.6\~30,\;0.6\~30\;and\; 1\~25 {\mu}M$ and detection limits (S/N=3) of 0.2, 0.2 and $0.3{\mu}M$ for 3,4-dihydroxycinnaminic acid (3,4-DHCA), 3,4-dihydroxybenzoic acid (3,4-DHBA) and 3,4-dihydroxyphenylacetic acid (3,4-DHPAA), respectively. In case of OAP derivative, the obtained sensitivity is $237 nA/{\mu}M$ with linear range of $0.2\~15{\mu}M$ and detection limit of 70 nM for 2-amino-4-chlorophenol (2-A-4-CP). The response time $(t_{90\%})$ is about 2 seconds for each substrate and the long-term stability is around 40-50days for catechol derivatives and 30 days for 2-A-4-CP with retaining $80\%$ of initial activity. The optimal pHs of the sensor for these substrates are in the range of 4.5-5.0, which indicates that stability of the enzymatically oxidized product plays a very important role in substrate recycling. The different sensitivity of the sensor for each substrate can be explained by the electronic effect of the sugstituent on the enzymatically oxidized form.

• 한국문헌정보학회지
• /
• 제44권4호
• /
• pp.179-201
• /
• 2010

본 연구는 이용자 편의를 목적으로 기존의 DDC 분류를 대체하거나 보완하는 주제어 기반 분류를 적용하고 있는 미국 공공도서관의 사례를 분석하여 그 효과와 문제점을 논의하고, 이러한 시도에 대한 향후 국내에서의 논의에 필요한 시사점을 제시하는데 목적이 있다. 이를 위하여 주제어 기반 분류를 사용하는 대표적인 미국 공공도서관 사례 11개를 선정하여 새로운 분류법을 적용하게 된 배경과 과정을 구체적으로 분석하고, 현재 사용되고 있는 주제어기반 분류의 유형을 구분하여 그 실례를 시행 시기, 시행 이유, 장서 규모, 적용 범위, 적용 과정 등으로 나누어 분석하였다. 이러한 분석의 결과, 주제어 기반 분류는 도서관 이용과 운영면에서 긍정적인 효과를 보이고 있었으나 동시에 여러 가지 한계를 가지고 있다는 결론을 얻게 되었다. 이러한 분석을 바탕으로 향후 국내에서의 논의에 필요한 시사점을 도서관계의 수용성, 국내 여건에 대한 고려, 적절한 유형 선택, 사서의 전문직에 미치는 영향, 주제명표 개발의 필요성, 그리고 이용자 지원의 필요성 등으로 나누어 제안하였다.

• 핵의학기술
• /
• 제22권1호
• /
• pp.46-50
• /
• 2018

검출기 외부에 강한 선원은 collimator와 상호 작용으로 산란선이 만들어지게 되는데, 그 산란선이 영상에 얼마나 영향을 주는지 평가하고자 한다. SKY LITE를 사용하여, phantom study의 경우, $^{99m}Tc$ 1.11 GBq를 점선원으로 만들어 검출기 주변을 $10^{\circ}$ 간격으로 돌아가면서 측정하여 각 각도에서의 산란선의 정도를 계수율과 스펙트럼으로 분석을 하였다. Patient study의 경우, 3-phase bone scan을 하는 환자를 대상으로, blood flow와 blood pool 영상을 획득하면서 산란선의 양과 스펙트럼을 분석하였다. 추가로 blood pool 검사 시, 환자의 손위에 납가운을 올려놓고 영상을 획득하였고, 환자의 몸에 납가운을 입히고 영상을 획득하여 각 영상에서의 산란선과 스펙트럼을 비교, 평가하였다. 그 결과, phantom study의 경우, 후방에서는 산란선의 없었지만, 측면부터 전방 $50^{\circ}$ 까지는 산란선이 많이 검출 되었다. patient study의 경우 blood flow 영상과 blood pool 영상에서 환자 몸에서 나온 감마선으로 인해 생긴 산란선이 입사됨을 알 수 있었다. 그리고 납가운은 손 위를 차폐하는것 보다, 환자 몸을 차폐 하는 것이 산란선이 많이 줄었다. 그러므로 외부에 강한 선원이 존재하고, hand blood flow, blood pool 검사처럼 계수 자체가 낮을 검사를 할 경우, 몸에서 나오는 선원 자체를 차폐하는 것이 산란선을 줄이는데 보다 효과가 있으며, 영상에서도 배후 방사선을 줄이는데 효과가 있음을 알 수 있었다.