• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.12
• /
• pp.1674-1680
• /
• 2002

An experimental study was made of a large-scale vortical structure over a backward-facing step. The Reynolds number based on the step height was R $e_{H}$ =33,000. To recognize the large-scale vortex, three components of velocity were measured. The measurements were performed in the recirculation zone (x/H=4.0) and the reattachment zone(x/H=7.5). To measure the wall pressure fluctuations in a turbulent flow over a backward-facing step, a 32-channel microphone array was installed beneath the wall in the streamwise and spanwise directions. From the measured pressure field, the size of large-scale vortex was obtained. As a detailed study, a conditionally-averaging technique was employed to characterize the coherent structure of the large-scale vortex. To see the relationship between the flow field and the relevant spatial mode of the pressure field, the spatial box filtering (SBF) was examined. A cross-correlation between velocity and pressure fluctuations was performed to identify the structure and the length scale of the large-scale vortex.x.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.8
• /
• pp.1060-1067
• /
• 2001

A large-scale bursting event has been analyzed in a turbulent channel flow using a data obtained from a direct numerical simulation (DNS). Large-scale, plume-like structures have been frequently observed in many experimental results, but the origin of those structures is far from being fully understood. It is believed that those large scale events occur occasionally but contribute significantly to the generation of Reynolds shear stress in the outer layer. This paper attempts to give detailed examples of those large-scale motions observed in a turbulent channel flow at relatively low Reynolds number.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.375-380
• /
• 2007

맥락 정보와 맥락 인식 시스템에 대한 연구는 지난 10 여 년 동안 유비쿼터스 컴퓨팅 분야에서 중요한 이슈로 다루어졌다. 대부분의 맥락 인식 시스템은 위치 정보와 같이 단일 형태의 맥락 정보를 위해서 설계되었거나 연구실 수준의 크기로 제한되었다. 그러나 많은 종류의 센서와 actuator 를 포함하고 다수의 관리 도메인으로 확장 가능한 스케일이 큰 시스템에 대한 개발 및 평가는 여전히 미흡한 수준이다. 특히, 맥락 퓨전과 추론 구조를 가지는 Large-scale 의 맥락 인식 시스템에 대한 평가 방법이 필요한 실정이다. 본 논문에서는 휴리스틱 평가를 이용한 Large-scale 맥락 인식 시스템의 평가 방법에 대하여 제안한다. 그리고 우리는 동적인 맥락 인식 시스템을 지원하고 맥락 퓨전 및 추론을 위한 메커니즘을 포함하는 기본 구조에 대해서 자세히 설명한다. 맥락 인식 시스템 평가를 위해서 제안된 접근법은 사용자 인터페이스 도메인에서 잘 알려진 전문가에 의한 평가 방법으로 Large-scale 맥락 인식 시스템에 적합하도록 특별히 선택된 heuristics 집합을 이용하는 휴리스틱 평가(Heuristic Evaluation)이다.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.3
• /
• pp.32-37
• /
• 2019

In various types of large-scale electrical applications, the number of coil turns in such machines is usually large. Electromagnetic simulation of large-scale superconducting coils (tens to hundreds of turns) is indispensable in the design process of superconducting electrical equipment. However, due to the large scale of the coil and the large aspect ratio of super-conducting material layer in HTS coated conductor, it is usually difficult or even unable to perform 3-D transient electromagnetic simulation. This paper introduces an effective 3-D electromagnetic simulation method for large-scale HTS coated conductor coil based on T-A formulation. The simulation and experimental results show that the 3-D model based on the T-A formulation using homogeneous strategy is more accurate than the traditional 2-D models. The memory usage is not sensitive to the number of turns and this model will be even more superior as the number of turns becomes larger.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.105-111
• /
• 2008

Various visualizing methods have been proposed according to the input and output types. To show complex and large-scale raw data and information. LOD and special region scale method have been used for them. In this paper, I propose level scale interface for dynamic and interactive controlling large scale data such as bio-data. The method has not only advantage of LOD and special region scale but also dynamic and real-time processing. In addition, the method supports elaborate control from large scale to small one for visualization on a region in detail. Proposed method was adopted for genome relationship visualization tool and showed reasonable control method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.159-163
• /
• 2008

The trend of Development Projects has been changing through a few recent years. Small-scale development projects in the past were usually for building residences or officetel in a big cities. making lots of profits. These projects made not only lots of profits but also unbalance between the urban centers and the suburbs. So government made some regulations to prevent the things from being worse anymore, planned to develop the country in balance and began to lead large-scale development project such as Inno city and Newtown. At first, in this study, the phases and the characteristics of development project's change will be looked around. And then, after overview about PFV(project financing vehicle) used a lot in large-scale development projects will be seen, the better ways to use PFV in large-scale development projects are going to be proposed by considering the problems in PFV's conformation.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.1 no.1
• /
• pp.45-50
• /
• 1997

Understanding the nonlinear flow caused by orographic effects can be valuable in siting of new businesses, industries, and transportation facilities. In spite of recent work on large-amplitude waves and wave breaking, the studies of flow around large scale mountains have just begun. The generative mechanism of lee vortices in the lee of large scale mountain is investigated by Ertel's theorem. The CSU RAMS is used as a numerical model. According to the numerical results, the isentropes are depressed behind the large scale mountains. This means the vortex lines must run upward and downward along the depression surface because vortex lines adhere to isentropic surfaces. Therefore, the vertically oriented vorticity can be formed in the lee of the large scale mountain. This vorticity plays an important role for orographic precipitation, because strong vertical velocity and cloud bands are developed along isothermal deformation surface.

• Journal of Environmental Science International
• /
• v.1 no.1
• /
• pp.45-50
• /
• 1992

Understanding the nonlinear flow caused by orographic effects can be valuable in siting of new businesses, industries, and transportation facilities. In spite of recent work on large-amplitude waves and wave breaking, the studies of flow around large scale mountains have just begun. The generative mechanism of lee vortices in the lee of large scale mountain Is investigated by Ertel's theorem. The CSU RAMS is used as a numerical model. According to the numerical results, the isentropes are depressed behind the large scale mountains. This means the vortex lines must run upward and downward along the depression surface because vortex lines adhere to isentropic surfaces. Therefore, the vertically oriented vorticity can be formed in the lee of the large scale mountain. This vorticity plays an important role for orographic Precipitation, because strong vertical velocity and cloud bandy are developed along isothermal deformation surface.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2017

The advanced driver assistant system (ADAS) requires the collection of a large amount of information including road conditions, environment, vehicle status, condition of the driver, and other useful data. In this regard, large-scale sensor networks can be an appropriate solution since they have been designed for this purpose. Recent advances in sensor network technology have enabled the management and monitoring of large-scale tasks such as the monitoring of road surface temperature on a highway. In this paper, we consider the estimation and fusion problems of the large-scale sensor networks used in the ADAS. Hierarchical fusion architecture is proposed for an arbitrary topology of the large-scale sensor network. A robust cluster estimator is proposed to achieve robustness of the network against outliers or failure of sensors. Lastly, a robust hierarchical data fusion scheme is proposed for the communication channel between the clusters and fusion center, considering the non-Gaussian channel noise, which is typical in communication systems.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1991.10a
• /
• pp.80-83
• /
• 1991

The need of UPS (Uninterruptible Power Sup-ply) system is dramatically increasing with the increased use of computers, telecommunica-tion system, building automation system, and office automation system in office buildings. The consequence of the power failure is very disas trous in intelligent office buil-dings. Thus, the nucessity of large scale UPS system with generations of large scale UPS system with generator is increasing. In this study, the configurations of large scale UPS system are reviewed and analyzed. The design guide and technical considerations of high reliability system are presented.