• The KIPS Transactions:PartB
• /
• v.9B no.6
• /
• pp.765-774
• /
• 2002

The purpose of this paper is a design and implementation for korean character and pen-gesture recognition system in multimedia terminal, PDA and etc, which demand both a fast process and a high recognition rate. To recognize writing-types which are written by various users, the korean character recognition system uses a database which is based on the characteristic information of korean and the stroke information Which composes a phoneme, etc. In addition. it has a fast speed by the phoneme segmentation which uses the successive process or the backtracking process. The pen-gesture recognition system is performed by a matching process between the classification features extracted from an input pen-gesture and the classification features of 15 pen-gestures types defined in the gesture model. The classification feature is using the insensitive stroke information. i.e., the positional relation between two strokes. the crossing number, the direction transition, the direction vector, the number of direction code. and the distance ratio between starting and ending point in each stroke. In the experiment, we acquired a high recognition rate and a fart speed.

• Journal of Korea Game Society
• /
• v.9 no.6
• /
• pp.151-161
• /
• 2009

In this paper, we propose a serious game which aims to draw the interest of rehabilitants and increase their locomotive ability with an infrared ray(IR) pen interface. The proposed game focuses on providing easy-to-manipulate cognitive rehabilitation environments. In order to achieve the goal, we devised new game interface composed of a Wiimote controller and a IR pen. Moreover, SVM(support vector machine) algorithm was employed for gesture recognition. The proposed game can be successfully utilized not only for rehabilitants but also for aged persons in preventing dementia and promoting their health.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.56-62
• /
• 2013

Poly (ethylene naphthalate) (PEN), which is likely to be widely used in various application due to good barrier properties, is manufactured by condensation polymerization of 2,6-dimethylnaphthalene dicarboxylate (2,6-NDC) or 2,6-naphthalene dicarboxylic acid (2,6-NDA) with ethylene glycol. In this study, an analytical method to determine monomers in food simulants, which might migrate from PEN food contact materials into food, was developed. The HPLC-UV method was validated for 2,6-NDC and 2,6-NDA. The obtained validation parameters were selectivity, sensitivity, linearity, precision and recovery. The simultaneous HPLC method was considered the be most effective analytical method to determine 2,6-NDC and 2,6-NDA in food simulants.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.481-488
• /
• 2011

Generally speaking, a document is a mutual promise between two parties and functions as a legally-binding trust for a transaction. A document should be produced on a mutual agreement basis, and its credibility shall be attained if the transparency of a document production is ensured. Therefore, sequence analysis of the procedures in a document production is very important for appraisal of a document. The purpose of this research is to distinguish sequence association between the erased carbon ingredients of a pencil and the ingredients left in a ball-point pen and thus suggest a method that determines whether mutual agreement was applied or not in signing an insurance policy. This method analyzes if the carbon ingredients of a pencil are left in the bottom section of a ball-point pen through infrared photography. If the carbon ingredients of a pencil are left in the bottom section of a pen, the pen shall absorb infrared rays and mark a dense concentration. This method applies a relatively simple infrared photography system and therefore shall be beneficial to a personal appraisal store.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.1
• /
• pp.1-8
• /
• 2014

Purpose: The purpose of this study is to evaluate the effect of applying Silano-pen to feldspathic porcelain and zirconia on shear bond strength with composite resin. Materials and methods: Feldspathic porcelain and zirconia specimens were produced into 30 per each 2 mm thick and 12 mm in diameter and their surface was made smooth and even and then embedded in acrylic resin. The specimens were divided into each Group F (Feldspathic porcelain) and Group Z (Zirconia), (1) Hydrofluoric acid etching and silane (F1 & Z1), (2) Silano-pen and silane (F2 & Z2), (3) Hydrofluoric acid etching and Silano-pen, silane (F3 & Z3). After surface conditioning, substrate surfaces of the specimen were examined by SEM. Composite resin cylinders (2 mm high, 3 mm in diameter)were bonded to specimen and shear bond strength between ceramic and composite resin was measured by using universal testing machine. The measured values were statistically analyzed by using two way ANOVA and Tukey's multiple comparison test (${\alpha}=.05$). Results: In the scanning electron micrograph of the treated ceramic surface, Group F2 and F3 appeared the high roughness and Group Z3 appeared the highest density of silica particle. In Feldspathic porcelain, the result of measuring shear bond strength showed that Group F3 was measured to be highest and Group F1 was measured to be lowest but there was no statistical significance among Groups. In zirconia, Group Z3 was measured to be highest and Group Z1 was measured to be lowest and there was statistical significance among Groups (P<.05). Conclusion: In zirconia, applying hydrofluoric acid etching and then Silano-pen and silane is effective for composite resin adhesion.

• Macromolecular Research
• /
• v.12 no.3
• /
• pp.293-302
• /
• 2004

We added surface-modified silica nanoparticles to poly(ethylene 2,6-naphthalate) (PEN) to investigate their effect on the mechanical properties on the PEN nanocomposite material. The torque and total torque values of the composites decreased in the silica nanoparticle composites. The tensile modulus of the composites reinforced with unmodified silica nanoparticles increased upon increasing the silica content, while the tensile strength and elongation decreased accordingly. In contrast, stearic acid-modified, silica nanoparticle reinforced PEN composites exhibited an increase in elongation and a decrease in tensile modulus upon addition of the silica nanoparticles because the stearic acid that had adsorbed onto the surface of the silica nanoparticle in multilayers could act as a plasticizer during melt compounding. Stearic acid modification had a small effect on the crystallization behavior of the composites. We calculated theoretical values of the tensile modulus using the Einstein, Kerner, and Nielsen equations and compared these values with the experimental data obtained from the composites. The parameters calculated using the Nielsen equation and the Nicolais- Narkis model revealed that the interfacial adhesion between silica nanoparticles and the PEN matrix could be improved.

• Korean Journal of Artificial Intelligence
• /
• v.2 no.1
• /
• pp.1-3
• /
• 2014

These days, interest and demand on smart learning has rapidly increased. Video English and mobile system based English speaking service have become popular. This study gave prototype of application to give and take voice message with world people and to give new concept of voice pen-pal beyond exchange of text messages. In modern society having rapidly increasing demand on smart learning, you can study foreign language by smart phone and communicate with foreigners by voice anytime and anywhere. The app allows global exchange to learn conversation. Recruitment of initial users and profit model have problems. We shall develop to improve problems and to solve difficulty.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.5
• /
• pp.58-64
• /
• 2012

In electric power supply systems, an earthing system determines the electric potential of the conductors related to that of the Earth's surface. The choice of earthing system has implications for the safety of the power supply systems. There are considerably different regulations for earthing (grounding) systems in each country. A protective earth(PE) conductor ensures that all exposed conductive surfaces are at the same electric potential as the earth surface. This paper deals with that when PEN conductor of TN-C-S system is disconnected, dangerous touch voltage causes personnel body to be harmed and human being's property to be damaged seriously. For this reason, this paper explains how serious problems can occur when the fault current flows. As a consequence, we can understand how we can design earthing system properly to ensure the personnel safety against earth faults. The result shows the way that TN-C-S system can be applied safely in Korea.

• Macromolecular Research
• /
• v.11 no.1
• /
• pp.62-68
• /
• 2003

Thermotropic liquid crystalline polymer (TLCP)/poly(ethylene 2,6-naphthalate) (PEN)/poly(ethylene terephthalate) (PET) ternary blends were prepared by melt blending, and were melt-spun to fibers at various spinning speeds in an effort to improve fiber performance and processability. Structure and property relationship of TLCP/PEN/PET ternary blend fibers and effects of annealing on those were investigated. The mechanical properties of ternary blend fibers could be significantly improved by annealing, which were attributed to the development of more ordered crystallites and the formation of more perfect crystalline structures. TLCP/PEN/PET ternary blend fibers that annealed at 18$0^{\circ}C$ for 2 h, exhibited the highest values of tensile strength and modulus. The double melting behaviors observed in the annealed ternary blend fibers depended on annealing temperature and time, which might be caused by different lamellae thickness distribution as a result of the melting-reorganization process during the DSC scans.

• Current Optics and Photonics
• /
• v.8 no.2
• /
• pp.170-182
• /
• 2024

The dimensional accuracy and consistency of a dual oil circuit centrifugal fuel nozzle are important for fuel distribution and combustion efficiency in an engine combustion chamber. A point cloud measurement method was proposed to solve the geometric accuracy detection problem for the fuel nozzle. An improved variance focus measure operator was used to extract the depth point cloud. Compared with other traditional sharpness evaluation functions, the improved operator can generate the best evaluation curve, and has the least noise and the shortest calculation time. The experimental results of point cloud slicing measurement show that the best window size is 24 × 24 pixels. In the height measurement experiment of the standard sample block, the relative error is 2.32%, and in the fuel nozzle cone angle measurement experiment, the relative error is 2.46%, which can meet the high precision requirements of a dual oil circuit centrifugal fuel nozzle.