• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.37-42
• /
• 2008

Since the solar radiation is the main input for sizing any solar photovoltaic system, it will be necessary to understand and evaluate the solar radiation data. The works presented here is the analysis of solar radiation data for East-North Asia areas. The data utilized in the analysis consist of the global radiation on horizontal surface, measured at 2 different stations during 3 years for the period from 2002 to 2004 and estimated using satellite at 27 different stations over the China and Mongolia. Also the measured data has been collected at 16 different stations all of the South Korea and estimated using satellite at 12 different stations over the North Korea from 1982 to 2005. The Result of analysis shows that the annual-average daily global radiation on the horizontal surface is 3.57 $MJ/m^2$. We conclude, based on the analysis, that East-North Asia areas have sufficient solar energy resources for the photovoltaic power generation system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.150-153
• /
• 2008

Since the solar radiation is the main input for sizing any solar photovoltaic system, it will be necessary to understand and evaluate the solar radiation data. The works presented here are the analysis of solar radiation data for East Asia areas. The data, which consist of the global radiation on horizontal surface, were measured at 16 different stations over the South Korea and were estimated by using satellite at 12 different stations over the North Korea from 1982 to 2004. Also the data over the Japan have been collected for 30 years for the period from 1941 to 1970. The Result of the analysis shows that the annual-average daily global radiation on the horizontal surface is 3.55 kWh/$m^2$. We conclude, based on the analysis, that East Asia areas have sufficient solar energy resources for the photovoltaic power generation system.

• Water for future
• /
• v.9 no.1
• /
• pp.47-54
• /
• 1976

The research are intend to establish the design criteria for slopy upland reclamation, with protecting the loss of top-soil, Recently undertaken reclamation works for developing the slopy upland of 310,000 ha. have faced to the vagueness of their deign criteria. One of the most influencing factors to cause the soil erosion depends basically upon the kinematic energy of rainfall, which is developed by the rainfall intensity. Their relationship between the rainfall and its kinematic energy is expressed as EK=916+ 331 log I. Consequently, the study was carried out through analyzing each intensity of the independant rainfall through out the 14 rainfall stations. About 10,000 single storms self recording chart of more than 10mm of rainfall amout were collected and analyzed by computer. The results of research show their kinematic energy for the 14 stations, and will be available for the establishment of the design oriteria.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.4
• /
• pp.39-46
• /
• 2011

This Study is about the Axis used for creating forms of interior spaces in representative works of Peter Eisenman architecture. The plans, elevations, photos of interior spaces of his architecture were collected and analysed. In conclusion, the methods using axises were classified in the axises crossing right angle and the rotating axises crossing right angle. The rotating axis were divided into one-angle rotating and multi-angle rotating. The axises were rotated on the plan or rotated on the elevation. The axises crossing right angle were used for dividing, assembling, transforming and composing different proportions of rectangles in interior spaces. The rotating axises crossing right angle were used for creating divers forms such as triangle, quadrilateral, and polygon. The one-angle rotating emphasizes directions of axises in interior spaces. The multi-angle rotating emphasizes decentered directions in interior spaces. The parts created while crossing axises three-dimensionally were opened or filled. The axises were used dynamically and three-dimensionally for diversity of forms in interior spaces of Peter Eisenman architecture.

• 중국학논총
• /
• no.68
• /
• pp.235-251
• /
• 2020

This study collected and intensively analyzed the works and remains in Namwon(南原) province by Liu Ting(劉綎) of Ming Dynasty during the Imjin War (the Japanese invasion in 1592-1598; 壬辰倭亂). Liu Ting engraved characters on the rocks as passing by the Yeowon hill(女院峙) twice. A local official of Namwon built a memorial stone at the guest residence of Namwon district to appreciate the contribution of Liu Ting to care for the local people. During the second Japanese invasion in 1597-1598(丁酉再亂), Liu Ting often climbed up the Yongdu pavilion(龍頭亭) located at Mt. Yongtu(龍鬪山) and fell in love with the splendid scenery while enjoying fishing at Jogi(釣磯). Immediately after the war, Liu Ting renovated the Guanwang Shrine(關王廟) in Namwon and built the memorial stone claiming that he defeated the Japanese army with the divine power from Guanyu(關羽).

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.995-998
• /
• 1995

As the modern industrial processes become more complex, it is getting more difficult to model and control the processes. Naturally, an advanced type of DCS(Distributed Control System) with higher level functions is being sought Advanced DCS is a DCS with advanced functions such as fault diagnosis, GPC(Generalized Predictive Control), NN(Neural Network), and Fuzzy Control. In this thesis, we have studied a fuzzy control algorithm for realizing an advanced DCS. Its algorithm is implemented in a form of function code which is a process control language, being used by the industrial engineers. To verify the realized function code of the fuzzy control, the function code is applied to a continuous casting process of the Pohang Iron & Steel Works in Kwangyang. The rules of the fuzzy control were collected via interviews of the field operators and their operation documents. Finally, usability of the function code of the fuzzy control is shown via simulation for the continuous casting process model.

• Journal of Engineering Education Research
• /
• v.21 no.5
• /
• pp.10-19
• /
• 2018

The need for integrating the arts and literature into the engineering education has been emphasized to cultivate the creative talent in recent years. However, there have been few studies to investigate how the arts and literature can be linked with nurturing creative talent in the engineering fields. In this paper, it is examined that inventive thinking principles for creative ideation in the engineering fields can be applied to the arts and literature. For the purpose, creative works in the arts and literature, which can be explained by the five thinking tools of SIT(Systematic Inventive Thinking), are collected. The result shows that engineering and the arts share common thinking patterns.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.269-278
• /
• 2000

Today the pedestrian-related problems a key subject requiring the attention of the traffic engineers for improving the transportation system. Particularly in urban and CBD locations, the pedestrian presents an element of sharp conflict with vehicular traffic. Therefore pedestrian movements must be studied for the purpose of providing guideline for the design and operation of walking transportation systems. This paper is to address the characteristics of walking transportation in a big city. Especially the focuses are emphasized on the ratio occupied by pedestrian traffic among the whole unlinked trips in a city and walking time. The data for analysis are collected in Seoul metropolitan city through sampling 1,006 citizens. Compared with other similar research works this paper utilized diversified tools to acquire more useful results. Finally, policy directions for pedestrian environment improvement were suggested.

• Educational Technology International
• /
• v.18 no.2
• /
• pp.131-157
• /
• 2017

The purposes of the study were to investigate the participation of artists in paper circuit computing learning and to conduct an in-depth study on the formation and development of practical knowledge. To do this, we selected as research participants six artists who participated in the learning program of an art museum, and used various methods such as pre-open questionnaires, participation observation, and individual interviews to collect data. The collected data were analyzed based on community of practice theory. Results showed that the artists participated in the learning based on a desire to use new technology or find a new work production method for interacting with their audiences. In addition, the artists actively formed practical knowledge in the curriculum and tried to apply paper circuit computing to their works. To continuously develop the research, participants formed a study group or set up a practical goal through planned exhibitions. The results of this study can provide implications for practical approaches to, and utilization of, paper circuit computing.

• Structural Engineering and Mechanics
• /
• v.36 no.2
• /
• pp.129-147
• /
• 2010

This study deals with the viability of using a designed geometrical model consists of plane, polar coordinates (PC) and span length in the determination of bridges deformation. The data of a Tianjin Yonghe bridge located in the southern part of China as collected by RTK-DGPS technique and Accelerometer were used in the analysis. Kalman filter and fast Fourier transformation (FFT) analyses were used to determine the frequency. The results indicate that the designed plane and PC geometrical model are easy to calculate the long-time structural deformation monitoring. In addition, the observed frequency using GPS with the rate of 20 Hz doesn't give correction natural frequency of the observation structures.