• Analyses & Alternatives
• /
• v.7 no.2
• /
• pp.35-77
• /
• 2023

This study aims to solve the entangled loop between demographic transition (DT) and economic growth by analyzing cross-country data. We undertake a national-level group analysis to verify the compressed transition of demographic variables over time. Assuming that the LA (latecomer advantage) on DT over time exists, we verify that the DT of the latecomer is compressed by providing a formal proof of LA on DT over income. As a DT has the double-kinked functions of income, we check them in multiple aspects: early maturation, leftward threshold, and steeper descent under a contour map and econometric methods. We find that the developing countries (the latecomer) have speedy DT (CDT, compressed DT) as well as speedy income such that DT of the latecomers starts at lower levels of income, lasts for a shorter period, and finishes at the earlier stage of economic development compared to that of developed countries (the early mover). To check the balance of DT, we classify countries into four groups of DT---balanced, slow, unilateral, and rapid transition countries. We identify that the main causes of rapid transition are due to the strong family planning programs of the government. Finally, we check the effect of latecomer's CDT on economic growth inversely: we undertake the simulation of the CDT effect on economic growth and the aging process for the latecomer. A worrying result is that the CDT of the latecomer shows a sharp upturn of the working-age population, followed by a sharp downturn in a short period. Compared to early-mover countries, the latecomer countries cannot buy more time to accommodate the workable population for the period of demographic bonus and prepare their aging societies for demographic onus. Thus, we conclude that CDT is not necessarily advantageous to developing countries. These outcomes of the latecomer's CDT can be re-interpreted as follows. Developing countries need power sources to pump up economic development, such as the following production factors: labor, physical and financial capital, and economic systems. As for labor, the properties of early maturation and leftward thresholds on DTs of the latecomer mean that demographic movement occurs at an unusually early stage of economic development; this is similar to a plane that leaks fuel before or just before take-off, with the result that it no longer flies higher or farther. What is worse, the property of steeper descent represents the falling speed of a plane so that it cannot be sustained at higher levels, and then plummets to all-time lows.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.215-225
• /
• 1996

All the radionuclides in high-level nuclear waste will decay to harmless levels eventually but for some radionuclides decay is so slow that their radiation remains dangerous for times on the order of tens or hundreds of thousands of years. At the present time, the most favorite disposal plan for high-level radioactive waste is a mined geological disposal in which canister enclosing stable solid form of radioactive waste is placed in mined cavities locating hundred meters below the surface. The chief hazard in such disposal is dissolution of radionuclides from the waste in the groundwater that will eventually carry the dissolved radionuclides to surface environments. The hazard from possible escape of the radionuclides through groundwater can be delayed by engineered and geologic barriers. The engineered barriers can become useless by unexpected geologic catastrophe such as volcanism, earthquake, and tectonic movement and by fraudulent work such as careless construction, improperly welded canisters within the first few decades or centuries. As a result, dangerously radioactive waste which is still intensively radioactive is directly exposed to attack by moving groundwater. All the more, it is almost impossible to control repositories for times more than 10,000 years. Therefore, naturally controlled geologic, barriers whose properties will not be changed within 10,000 years are important to guarantee the safety of repositories of high-level radioactive waste. In Sweden and France, the suitability of granite for the mined geological disposal of high-level waste has been studied intensively. According to the research in Sweden and France, granites has the following physio-chemical characteristics which can delay the transportation of radionuclide by groundwater. First, the permeabilities of granites decreases as the depth increases and is $10^{-8}{\sim}10^{-12}m/s$ at depth below 300 m. Second, groundwater at depth below 300 m has pH=7-9 and reducing condition (Eh=-0.1~0.4). This geochemical condition is desirable to prevent both canister and solid waste from corrosion. Third most radionuclides are not transported by low solubilities and some radionuclide with high solubility such as Cs and Sr are retarded by absorption of geologic media through which ground water flows. Therefore, if high-level waste is disposed at depth below 300 m in the granite body which has a low permeability and is geologically stable more than 10,000 years, the safety of repositories from the hazard due to radionuclide escape can guaranteed for more than 10,000 years.

• Nuclear Engineering and Technology
• /
• v.25 no.3
• /
• pp.361-370
• /
• 1993

Low power physics tests should be peformed for the domestic pressurized light water reactors (PWRs) after refueling. The tests are peformed to ensure that operating characteristics of the core are consistent with predictions and that the core can be operated as designed. But in some low power physics tests, slow but steady reactivity increasing phenomena were noticed after step reactivity insertion by the control rod movement. These reactivity increasing phenomena are due to the low flux level and the gamma background because an uncompensated ion chamber (UIC) is used as the ex-core neutron detector. The gamma background may affect the results or the lour power physics tests. The aims or this paper are to analyze the grounds of such phenomena, to simulate a reference bank worth measurement test and to present a resolution quantitatively. In this study, the gamma background level was estimated by numerically solving the point kinetics equations accounting the gamma background effect. The reactivity computer check test was simulated to verify the model. Also, an appropriate neutron flux level was determined by simulating the reference bank worth measurement test. The determined neutron flux level is approximately 0.3 of the nuclear heating flux. This level is about 3 times as high as the current test upper limit specified in the test procedure. Then, the findings from this work were successfully applied to Kori unit 4 cycle 7 and Yonggwang unit 1 cycle 7 physics tests.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.469-484
• /
• 2020

This study focused on shielding through inflatable structure in the event of sudden water inflow into the submerged floating tunnels. Currently, there is a lack of measures to deal with unexpected water in tunnels in Korea. Although water treatment facilities such as waterproofing and floodgates in tunnels are installed, there are limitations to the sudden inflow of large amounts of seawater or underground water. Also, floodgates cannot respond quickly to sudden damage due to slow blocking time. Accordingly, a study was conducted on the shielding rate and axial movement distance for inflatable structure. The results of the reduced model experiment confirmed that the number of inflatable structure and internal pneumatic pressure influence on the shielding rate. As the number of inflatable structure increased from one to two, the shielding rate increased by about 35 up to 40 percent. It was also confirmed that the shielding rate increased by about 4 percent as the internal pneumatic pressure increased from 0.2 bar to 0.3 bar. If we verify and further develop the results identified in this study through a real-size experiment, it will be able to be used as an effective waterproof measure for sudden water inflow into the undersea tunnels or underwater tunnels.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.13-24
• /
• 2014

A series of trapdoor model tests was systematically performed in order to investigate soil arching. The mobilized soil arching was clearly observed by change of the vertical earth pressure loaded on trapdoor of soil container box. A slow decent of the loading plate at the trapdoor results in loosening zone over the trapdoor and the stress in this loosening zone was transferred to the stationary zone in the vicinity of the trapdoor. In particular, it was observed that the vertical earth pressure rapidly decreased in the loosening zone and increased in the stationary zone at the trapdoor. Both the maximum decreasing rate of the vertical earth pressure in the loosening zone and the increasing rate of the vertical earth pressure in the stationary zone were not influenced by the ground density, but affected by the size of the trapdoor. The loosening zone could be defined by the elliptical configuration, in which the major axis was twice as long as the height of the loosening zone at the center of trapdoor and the minor axis was the same as the width of trapdoor. The height of loosening zone at the center of trapdoor was one and a half times as long as the width of trapdoor loading plate.

• Journal of Adhesion and Interface
• /
• v.25 no.2
• /
• pp.69-74
• /
• 2024

Soft actuators can be applied to various fields such as the medical industry and manufacturing industry due to the flexibility and smooth movement resulted from their constituent materials. Stimuli-responsive hydrogels are a class of materials that can show large volume changes due to various surrounding stimuli and thus is suitable as a soft actuator material. However, because the change in volume of the stimuli-responsive hydrogel depends on the rate of temperature change and the rate at which the solvent diffuses into the polymer network, in most typical operating conditions, the response time of the actuator is slow due to inefficient heat transfer and diffusion process. In this study, a conjugated polymer was introduced into polydiethylacrylamide, a thermoresponsive hydrogel, to implement a soft actuator driven by light, and the improvement in response time by the photothermal effect of the conjugated polymer was investigated. It was confirmed that the response time was improved by 41% by the introduction of the conjugated polymer, due to the improvement in heat transfer efficiency. Finally, a soft gripper using the hydrogel with improved response time was fabricated and the response time of the gripper was investigated.

• The Journal of Korean Academy of Sensory Integration
• /
• v.16 no.1
• /
• pp.14-24
• /
• 2018

Objective : The purpose of this study was to identify the effect of Interactive Metronome (IM) training on postural control and hand writing performance of children with Attention Deficit Hyperactivity Disorder (ADHD). Methods : Participant was a third grade elementary school student diagnosed with ADHD. ABA design was used and a total of 30 sessions were held for 3 sessions every week for a total of 10 weeks. In the intervention period, IM training was conducted for 40~50 minutes before intervention for writing, and the writing task was carried out. We evaluated the handwriting legibility and speed. Before baseline A and within a month after A' phase, Clinical Observation of Motor and Postural Skills (COMPS) was evaluated to examine the changes in postural control of the student. Results : After the IM intervention, the postural control of the student improved in the score of slow movement, finger-nose touching, and asymmetrical tonic neck reflex. The handwriting legibility and speed has also tended to increase during the intervention period, but it has not significantly changed. Conclusion : This study could be used as an evidence that the IM training aimed at postural control and handwriting ability could enhance the ability to improve postural control and thereby provide fundamental knowledge for future studies.

• Herbal Formula Science
• /
• v.25 no.2
• /
• pp.223-251
• /
• 2017

Objectives : A lot of experiment results of Yugmijihwangtang(YM) are reported in various kinds of journals. Many of them report on the new effects that are not recorded in the traditional medical texts. So it is necessary to take it into consideration that newly reported effects could be of help to clinical practice, because this process of comparison of Donguibogam and scientific experiment results will have basis to lead into the evidence based medicine. Methods : We compared the effects of in Donguibogam and the experiment results of YM. Results : The effects of YM in Donguibogam are to replenish essence and marrow, and to treat red wen, fatigue, treat hypouresis, urinary sediment, urinary urgency, hematuria, hydrocephalus, speech and movement retardation, yin-deficiency, diabetes mellitus, nonalcoholic fatty liver, melanoma, disability to see near and far sight, tinnitus, hearing loss, alopecia, angiogenesis, cough, cough at night, trachyphonia, and, infantile convulsion. The experiment results of YM since 2000 in both Korea and China are to inhibit atopic dermatitis, renal interstitial fibrosis, anti-oxidant, emphysema, stress, glomerulosclerosis, diabetic nephropathy, chronic glomerulonephritis, hemorrhage, plantar sweating, dermal aging, kidney aging, bone loss, breast cancer, pathological myocardial cell, primary liver cancer, thrombosis, osteoporosis, intrauterine growth retardation, chronic renal failure, IgA nepropathy, slow cerebral development, and hippocampal tissue lesions on the one hand, and to help bone formation, renin-angiotensin- aldosterone system, cerebral recovery, cognitive function and expression, osteoblast proliferation and differentiation, learning and memory, cold-tolerance and oxygen deficit-tolerance and anti-fatigue, endometrial formation, humoral and cell-mediated immunity, immune regulation effect, Hypothalamus-Pituitary-Ovary Axis, and spermatogenesis, on the other hand. Conclusion : When we compared the effects of YM with the experiment results of YM, there existed a considerable gap between them. So, from now on, it is expected that a great effort and consideration are needed to solve these gaps from an academic and clinical point of view.

• Journal of Biomedical Engineering Research
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2004

Stage 1 sleep provides important information regarding interpretation of nocturnal polysomnography, particularly sleep onset. It is a short transition period from wakeful consciousness to sleep. Lack of prominent sleep events characterizing stage 1 sleep is a major obstacle in automatic sleep stage scoring. In this study, we attempted to utilize simultaneous EEC and EOG processing and analyses to detect stage 1 sleep automatically. Relative powers of the alpha waves and the theta waves were calculated from spectral estimation. Either the relative power of alpha waves less than 50％ or the relative power of theta waves more than 23％ was regarded as stage 1 sleep. SEM (slow eye movement) was defined as the duration of both eye movement ranging from 1.5 to 4 seconds and regarded also as stage 1 sleep. If one of these three criteria was met, the epoch was regarded as stage 1 sleep. Results f ere compared to the manual rating results done by two polysomnography experts. Total of 169 epochs was analyzed. Agreement rate for stage 1 sleep between automatic detection and manual scoring was 79.3％ and Cohen's Kappa was 0.586 (p＜0.01). A significant portion (32％) of automatically detected stage 1 sleep included SEM. Generally, digitally-scored sleep s1aging shows the accuracy up to 70％. Considering potential difficulties in stage 1 sleep scoring, the accuracy of 79.3％ in this study seems to be robust enough. Simultaneous analysis of EOG provides differential value to the present study from previous oneswhich mainly depended on EEG analysis. The issue of close relationship between SEM and stage 1 sleep raised by Kinnariet at. remains to be a valid one in this study.

• Journal of Bio-Environment Control
• /
• v.24 no.4
• /
• pp.308-316
• /
• 2015

This study was conducted to investigate the situation of ICT apply to plastic greenhouse, and the results be apply to design of new one. A CFD analysis were conducted to monitering the ventilation and energy saving of the single span greenhouse newly designed. The causes of delay to apply ICT to plastic greenhouse are the high cost for installation(24%), insufficiency of after services(19%), often disorder(16%), unskillful management of soft ware(15%), insufficient ICT efficiency(13%) and unsatisfying of income increase(12%). The parts of problem occurred in ICT plastic greenhouse are the structure, actuator, environmental control system and sensor(approximate 14%, respectively), remote control technique(13%), plant management technique(12%), energy saving technique(10%) and utilization of software(8%). In the condition of lateral window closed, the average wind speed changed to slow, but it was faster in the condition of leeward side window opened than in the condition of lee and winward side window opened. The air movement in the condition of lateral window closed occur by air moving fan not by out air. It is not affect the room temperature but effective the uniformity of room temperature. The average temperature of low height greenhouse was uniform than high height one. The average temperature in condition of 3rd curtain opened become same with outside temperature after 2 hours, but take more 5 hours in condition of 3rd curtain closed.