• Journal of the Korea Concrete Institute
• /
• v.18 no.1 s.91
• /
• pp.57-64
• /
• 2006

The crack presented in concrete structures causes a structural defect, the durability decrease, and external damages etc. Therefore, it is necessary to improve durability through the effort to control the crack. Fluosilicic acid($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicates prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicates to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. Mix proportions for experiment were modulated at 0.45 of water to cement ratio and $0.0{\sim}2.0%$ of adding ratio of fluosilicate salt based inorganic compound. To evaluate correlation of concrete strength and adding ratio of fluosilicate salt based inorganic compound, the tests were performed about design strength(21, 24, 27 MPa) with 0.5% of adding ratio of fluosilicate salt based inorganic compound. Applications of fluosilicate salt based inorganic compound to reduce cracks resulted from plastic and drying shrinkage, to improve durability are presented in this paper. Durability was evaluated as neutralization, chloride ion penetration depth, freezing thawing resistant tests and weight loss according reinforcement corrosion. It is ascertained that the concrete added fluosilicate salt based inorganic compound showed m ability to reduce the total area and maximum crack width significantly as compared non-added concrete. In addition, the durability of concrete improved because of resistance to crack and watertightness by packing role of fluosilicate salt based inorganic compound obtained and pozzolanic reaction of soluble $SiO_2$ than non-added concrete.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.24-29
• /
• 2002

The study was performed to investigate the degrees of gelatinization at various processing steps during the preparation of Dangmyuns using sweet potato, potato, corn and tapioca starches, and also determined the rehydration of the freeze dried sweet potato Dangmyun. The degrees of gelatinization after extrusion cooking showed higher value than other processing steps. The degrees of gelatinization after extrusion cooking were 63.5% in sweet potato, 80.0% in potato, 82.3% in corn, and 86.5% in tapioca Dangmyuns. The degree of gelatinization in Dangmyuns after extrusion cooking step decreased as the processing steps, such as cold storage, freezing, thawing, and sun drying, progressed. L values of color in Dangmyuns decreased in the order of corn>tapioca>potato>sweet potato Dangmyuns. The cooking loss decreased in the order of tapioca>corn>potato>sweet potato Dangmyuns. The percentage of weight gain was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. The water absorption rate constant was the highest in sweet potato Dangmyun followed by corn, potato, and tapioca Dangmyuns. In the rehydration of freeze dried Dangmyuns, freeze dried sweet potato Dangmyun showed better than the others. An increase from 60% to 70% of the added amount of water in the mixing step resulted in an increase of the degrees of gelatinization after extrusion cooking from $63.4{\sim}70.7%$ to $73.8{\sim}75.0%$. An increase of the added water in the mixing step and a decrease of diameter in the extrusion cooking step slightly improved the rehydration in the boiled water of freeze dried sweet potato Dangmyun.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.190-196
• /
• 2007

This study was carried out to investigate the effects of pressure assisted freezing(PAF) on physicochemical properties of pork meat. Pork meat was frozen under pressure up to 200 MPa at $-60^{\circ}C$, and compared with fresh control. Phase transition temperature decreased with increasing pressure level, while pressure level had no effect on supercooling extent. Increasing pressure level increased pH of meat significantly(p<0.05). Thawing losses of all treatments were significantly higher(p<0.05) than control with the exception of PAF at 200 MPa. Water holding capacity(WHC) was increased significantly(p<0.05) with increasing pressure level up to 100 MPa. Cooking loss tended to decrease with increasing pressure level. In color, CIE $L^*-\;and\;b^*-value$ increased with increasing pressure level, while CIE $a^*-value$ decreased significantly(p<0.05). Increasing pressure level up to 150 MPa increased shear force significantly(p<0.05), however, no significant difference between 150 and 200 MPa in shear force was found(p>0.05). Therefore, the results indicated that excessive pressure level in PAF caused several losses in meat qualities, while PAF at mild pressure level improved meat qualities compared to atmosphere freezing.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1762-1772
• /
• 2013

The objective of the current study was to determine the effect of pre-slaughter stress, season and breed on the activity of plasma creatine kinase (CK) and the quality of mutton. One hundred and seventy-three (173) castrated sheep from Dormer (DM), South African Mutton Merino (SAMM), Dorper (DP) and Blackhead Persian (BP) sheep breeds were used in the study. The animals were grouped according to age-groups as follows: Group 1 (6 to 8 months), Group 2 (9 to 12 months) and Group 3 (13 to 16 months). Blood samples were collected during exsanguinations using disposable vacutainer tubes for CK analysis. Representative samples of the Muscularis longissimuss thoracis et. lumborum (LTL) were collected from 84 castrated sheep, of different breeds (28 per breed) 24 h after slaughter. The following physico-chemical characteristics of mutton were determined; meat pH ($pH_{24}$), color ($L^*$, $a^*$ and $b^*$), thawing and cooking losses and Warner Braztler Shear Force (WBSF). The activity of plasma CK was significantly higher (p<0.001) in summer ($1,026.3{\pm}105.06$) and lower in winter ($723.3{\pm}77.75$). There were higher values for $L^*$ ($33.7{\pm}0.94$), $b^*$ ($11.5{\pm}0.48$) and WBSF ($29.5{\pm}1.46$) in summer season than in winter season; $L^*$ ($29.4{\pm}0.64$), $b^*$ ($10.2{\pm}0.33$) and WBSF ($21.2{\pm}0.99$). The activity of plasma CK was influenced by the type of breed with Dormer having the highest (p>0.001) levels ($1,358.6{\pm}191.08$) of CK. South African Mutton Merino had higher values for $pH_{24}$ ($5.9{\pm}0.06$), $L^*$ ($34.2{\pm}0.97$), $b^*$ ($12.2{\pm}0.50$) and WBSF ($26.8{\pm}1.51$) and Blackhead Persian had higher values ($35.5{\pm}2.17$) for cooking loss (CL%) than the other breeds. Computed Principal Component Analyses (PCA) on the activity of plasma CK and physico-chemical characteristics of mutton revealed no correlations between these variables. However, positive correlations were observed between $pH_{24}$, $L^*$, $a^*$, $b^*$, CL% and WBSF. Relationships between pre-slaughter stress, CK activity and physico-chemical characteristics of mutton were also observed. It was therefore concluded that although mutton quality and creatine kinase were not related, pre-slaughter stress, season and breed affected the activity of creatine kinase and mutton quality.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1477-1486
• /
• 2020

Objective: The objective of this study was to evaluate the effect of different levels of lycopene supplementation on the carcass traits, meat quality, concentration of lipid oxidation products and antioxidant potential in the meat and liver of finishing barrows and gilts. Methods: A total of 40 barrows and 40 gilts were allotted in a completely randomized block design, arranged in a 2×5 factorial scheme, consisting of two sexes (barrows and gilts) and five dietary levels of lycopene (0, 12.5, 25.0, 37.5, and 50.0 mg/kg). In addition, four storage times (0, 24, 48, and 72 h), at 4℃, were added to the model to evaluate the longissimus lumborum muscle. Results: An interaction (p = 0.010) was observed between storage periods and dietary lycopene levels. The unfolding of the interaction (lycopene×period) showed a decreasing concentration of malondialdehyde concentration as the dietary lycopene increased, at all storage periods. No interactions (p>0.050) were observed for the 2,2 diphenyl 1 picrylhydrazyl (DPPH) in the pork. However, the percentage of DPPH radical inhibition reduced (p = 0.001) up to 72 h. Additionally, there was a linear increase (p = 0.001) in the capture of DPPH radicals by antioxidants, as the dietary lycopene increased. No interactions were observed (p>0.05) between the evaluated factors in liver. However, lipid oxidation was reduced by supplementing lycopene in pig diets. The capture of the DPPH radical, resulted increase in the antioxidant power exerted by lycopene in the liver (p = 0.001). The concentrations of the thiobarbituric acid reactive substances and DPPH in the liver were affected by sex (p = 0.001). Conclusion: Dietary supplementation of lycopene reduced the water loss during thawing and was effective in protecting against oxidation of the longissimus lumborum muscle and liver until 72 hours of storage, and the best results were obtained by supplementing with 50.0 mg of lycopene/kg of diet.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.71-80
• /
• 2004

The failure of cut slopes frequently occurs particularly during the thawing season and the rain season in summer. This study interpreted data collected from site to which a real-monitoring system was applied in order to analyze the causes of ground behaviors and to forecast future slope failure. As for research methods, this study analyzed the size and mechanism of failure by integrating the results of field surveys and measurements. Furthermore, it analyzed data transmitted by the monitoring system installed in the a result, three times of ground displacement occurred as well as a number of partial tension cracks. The cut slope composed of sandstone and siltstone started its initial behavior as a result of torrential downpour and the loss of support of the substructure. For quantitative analysis of the characteristics of ground behavior, this study measured 5 lateral lines. According to the result of the measurement, displacement happened little in the section to which countermeasure had been applied, but displacement of maximum 400mm happened in the section to which countermeasure had not bee applied. The analysis of data on displacement and rainfall suggested a close relationship between ground behavior and rainfall. According to the result of stability interpretation along with the change of ground saturation, stability rate appeared to be less than 1.0 when ground saturation is over 55%. Although the current trend of ground behavior is at a stable stage falling within the range of tolerance, it is considered necessary to continue monitoring and data analysis because ground displacement is highly possible with the change of temperature during the winter.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.433-442
• /
• 2021

In this study, the properties of no-fines polymer concrete with different polymer binder contents were evaluated. The polymer concrete was formulated using a polymeric binder (unsaturated polyester resin), fly ash, and recycled coarse aggregate (60%) and crushed coarse aggregate (40%). The polymeric binder content (4.0-6.0wt.%) was used as an experimental variable because it dramatically affects both the cost-effectiveness and material properties. The results showed that the density, compressive strength, flexural strength both before and after exposure to freezing and thawing increased as the polymer binder content increased, while the absorption, void ratio, permeable voids, coefficient of permeability, and acid resistance (mass loss by acid attack) decreased as the polymeric binder content increased. In particular, even though the void ratio was 18.4% and the water permeability coefficient was 7.3mm/sec, the compressive strength and flexural strength were as high as 38.0MPa and 10.0MPa, respectively, much more significant than those of previous studies. Other properties such as absorption and acid resistance were also found to be excellent. The results appear to be rooted in the increased adhesion of the binder by adding a cross-linking agent and the surface hydrophobicity of the polymer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.31-38
• /
• 1999

Rainfall factor. R, and soil factor, K were estimated to use the Revised Universal Soil Loss Equation (RUSLE) to predict the amount of soil erosion from a land on slope in Kangwon-do, Korea. The average of R factor was 405 with a range from 251 to 601. The R factor differed among regions. The R factor at Taegwalryung, in the highland region, was 409 and those at Inje and Hongchon, in the mid mountainous regions, ranged from 310 to 493. The R factors at Wonju and Chuncheon, in the plain regions, ranged from 505 to 601. The R factors at Sokcho, Kangnung and Samchok, in the east coastal region, which ranged from 251 to 368, were lowee than those in the western part of the Taebaeg Mountains. The R factor during the winter including the effect of winter freezing and thawing was 12 to 30% of the annual average value in the east coastal and highland regions, while that in the western part of Taebaeg Mountains was lower than 7%. The average of K factor in the surface soil was 0.21 with a range from 0.06 to 0.42. The K factors of Odae and Weoljeong serieses were the lowest, while that of Imog was the highest. The average of K factor in the subsoil was 0.28 with a range from 0.07 to 0.45. The K factor of the subsoil was 1.3 times higher than that of top soil. The average of K factor in he soil including the effect of the gravel covering and percolation was 0.18 with a range from 0.03 to 0.33. In contrast. the K factor excluding the effect of the gravel covering was lower than this. The average of K factor in the frozen subsoil was 0.33, which was 1.6 times higher than that of the non frozen subsoil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.2019-2027
• /
• 2013

In this study, we tried to develop a coating agent for the fresh-cut fruits used in cakes. First, the coating agent mixing ratios of sugar, pectin, sodium alginate, carrageenan, xanthan gum, vitamin C, and purified water were selected to be 55, 2, 2, 0.04, 0.1, 0.05, and 40.81% (w/w), respectively. In a freeze-thaw stability of the coating agent, the viscosity remained constant for 3 cycles of freezing and thawing repetition process, but showed a slightly decreasing trend in the 4th repetition process (P<0.05). On the other hand, the sugar content, pH, and chromaticity remained constant even in the 4th repetition process. Pineapple coated with the coating agent had smaller weight loss, hardness changes, and total bacteria distribution compared to the uncoated pineapple (P<0.05). In the chromaticity, both of the two pineapples experienced browning with increasing storage duration, as L value decreases and b value increases. However, when the color difference was compared, the progress of browning for the uncoated pineapple was faster than the coated pineapple. Also, the progress of browning at $4^{\circ}C$ was found to be slower than the progress of browning at $25^{\circ}C$. Therefore, the storage stability of the fresh-cut fruits could be improved by coating the fresh-cut fruits for cakes with the coating agent and storing at a low temperature, which would contribute to extending the shelf-life of cakes.