• Journal of the Korean Geographical Society
• /
• 제43권3호
• /
• pp.296-311
• /
• 2008

In order to examine the rates and factors of path widening in Mount Halla, the retreat of path sidewalls was monitored at 32 sites of Seongpanak Hiking Trail located between 875 m and 1,400 m in elevation. The mean rate of sidewall retreat for the period 2002-2008 is 50.6 mm, equivalent to 10.0 mm/yr. The retreat rate of frozen period is 19.3 mm/yr, while the rate of unfrozen period is 4.3 mm/yr. The latter is divided into the rainy and dry periods that exhibit the retreat rates of 5.9 mm/yr and 2.9 mm/yr, respectively. The retreat rate of sidewalls is also varied with seasons; winter shows the maximum rate of 42.2 mm/yr, while summer exhibits the minimum rate of 1.3 mm/yr. Spring and fall show the intermediate rates of 13.9 mm/yr and 6.4 mm/yr, respectively. Soil hardness and elevation are not closely related to the retreat rate of sidewalls, even though the retreat rate is larger at the north-faced sidewalls than the south-faced sidewalls during the frozen period. Pipkrake is likely to be the most important factor contributing to the path widening in that the retreat of winter months accounts for 76.7% of the total retreat. The hiking trail is placed under the climatic conditions which develop pipkrake in 85 days annually. In addition, it is usual to observe the path sidewall covered with pipkrake in the freezing month of December and the thawing months of March and April. On the other hand, deflation and rainsplash erosion are not important due to the weak wind speed and the forested trail. Rainwash is also insignificant in that the path has been almost paved to mitigate trampling effects. Although biological activity is not dominant, hikers cause a large retreat of sidewalls in the thawing months since they would walk on the sidewalls to avoid snow-melting pools on the path.

• Journal of Animal Science and Technology
• /
• 제48권6호
• /
• pp.797-804
• /
• 2006

The present study was undertaken to investigate the post-thawed survivability of bovine embryo depending on different dose of ethylene glycol and sucrose. Ovaries were collected at local slaughterhouse and the cumulus-oocyte-complexes aspirated from ovaries were in vitro matured, fertilized and cultured at 39°C in an atmosphere of 5% CO2 incubator. For conventional slow-freezing, d 7 or 8 expanded blastocysts were collected. Embryos were equilibrated in 1.5 M and 1.8 M ethylene glycol(EG) with 0.1 M and 0.3 M sucrose in Dulbecco's phosphate-buffered saline(D-PBS) supplemented with 0.5% bovine serum albumin. Embryos were then loaded individually into 0.25ml-straw and placed directly into cooling chamber of programmable freezer precooled to 󰠏7°C, after 2 min, the straw was seeded, maintained at 󰠏7°C for 8 min, and then cooled to 󰠏35°C at 0.3°C/min, plunged and stored in liquid nitrogen for at least 3 days. For thawing, the straw containing embryos were warmed in air for 10 sec and exposed to 37°C water for 20 sec. Straws were then removed from 37°C water. Rates of blastocyst survive and hatching were evaluated at 24 to 72 h post-warming. No difference of the survivability was shown between 1.5 M and 1.8 M EG (71 and 70%, respectively). Addition of 0.1 M sucrose to 1.5 M and 1.8 M ethylene glycol in the freezing solution did not differ significantly embryo survival (74 and 77%, respectively), whereas survival rates was higher(89%) in freezing solution contained 0.3M sucrose to 1.8M EG compared with 0.3M sucrose to 1.5M EG group(71%). However, there was no difference in the overall total cell number between the two groups (122±1.8 vs 131±1.4, respectively). In conclusion, the results suggest that 0.3 M sucrose in 1.8 M EG may be optimal condition for freezing and thawing methods with in vitro produced embryos and may be applied to on-farm conditions for embryo transfer.

• Korean Journal of Food Science and Technology
• /
• 제31권6호
• /
• pp.1529-1535
• /
• 1999

This study was done for the extraction of carotenoid from Phaffia rhodozyma in combination with PEF and other methods. PEF treatment conditions were $30{\sim}80\;kV/cm,\;100{\sim}1000\;Hz\;and\;100{\sim}1000\;{\mu}s$. In order to increase permeability of yeast cell wall, various methods such as freezing-thawing, mechanical treatment, solvents, permeabilizing agents, and yeast cell wall lytic enzyme were used before PEF treatment. The combination of PEF $(50\;kV/cm,\;300\;Hz,\;1000\;{\mu}s)$ and conventional methods such as solvent and freezing-thawing pre-treatment had no effects on the extraction of carotenoid pigments. The extent of extracted carotenoid by the PEF $treatment(50\;kV/cm,\;300\;Hz,\;1000\;{\mu}s)$ combined with yeast cell wall lytic enzyme and mechanical pre-treatment increased 52% and 69.8% more than the sum of that by each treatment, respectively. Permeabilizing agents, especially Tween 20 and capric acid, enhanced the extraction efficiency of carotenoid pigments from P. rhodozyma cells. These results indicated the feasibility for the continuous extracting carotenoid pigments from P. rhodozyma by PEF combined with other permeabilizing methods.

• Journal of the Korea Concrete Institute
• /
• 제20권1호
• /
• pp.13-22
• /
• 2008

The initiation and growth processes of cyclic ice body in porous systems are affected by the thermo-physical and mass transport properties, as well as gradients of temperature and chemical potentials. Furthermore, the diffusivity of deicing chemicals shows significantly higher value under cyclic freeze-thaw conditions. Consequently, the disintegration of concrete structures is aggravated at marine environments, higher altitudes, and northern areas. However, the properties of cyclic freeze-thaw with crack growth and the deterioration by the accumulated damages are hard to identify in tests. In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the response surface method (RSM) is used. The important parameters for cyclic freeze-thawdeterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used to compose the limit state function. The regression equation fitted to the important deterioration criteria, such as accumulated plastic deformation, relative dynamic modulus, or equivalent plastic deformations, were used as the probabilistic evaluations of performance for the degraded structural resistance. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages due to the cyclic freeze-thaw using the proposed prediction method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제31권5호
• /
• pp.770-774
• /
• 2002

The effect of mixing ratio of materials and their retort processing conditions on the physical properties and preference of oyster porridge were investigated. Rice gave adequate viscosity (about 800 cp) to the porridge as it was used 10～12% level and half of it was ground. Potato starch, waxy corn starch, and Perfectamyl AC showed small variation in viscosity unrelated to the temperature, that was a good condition for high quality porridge. Especially, waxy corn starch had a good property for retort porridge because its viscosity was maintained high during the processing and decreased to preferable one after processing. Purity CSC, modified starch gave gum-like texture and didn't cause water-separation much after freezing and thawing treatment of the porridge. Therefore, it was good for enhancing the physical property of the porridge as a co-additive of waxy corn starch when it was used at quarter level of waxy corn starch. Xanthan gum increased dispersibility of materials and it was useful for stabilizing physical quality of the porridge without affecting preference when it was used below 0.2% concentration. As a result, the optimal material-mixing ratio was determined as rice 10% (50% of it was ground), waxy corn starch 1.5%, Purity CSC 0.5%, xmthan gum 0.2%, salt 0.3%, and water 87.5%. Oyster's porridge, retort processed with this recipe, showed stable physical property after 6 month storage at room temperature.

• Reproductive and Developmental Biology
• /
• 제35권1호
• /
• pp.61-65
• /
• 2011

The objective of this study was to examine the effect of various discontinuous Percoll washing conditions on motile sperm recovery rate and motion kinematics. Frozen semen samples from 3 bulls (0.5 ml plastic straws, 6% glycerol in egg yolk-Tris-glycerol extender) were thawed in $37^{\circ}C$ water bath for 1 min. After thawing, the mixed semen samples were randomly allocated to 12 treatment groups. Briefly, the spermatozoa were centrifuged for three different time lengths (10, 20, and 30 min) at two gravities ($300{\times}g$ and $700{\times}g$) through two concentrations of discontinuous Percoll density gradient of 1 ml 90%: 1 ml 45% Percoll and 2 ml 90%: 2 ml 45% Percoll to remove extender, debris, and dead spermatozoa. Motile sperm recovery rate and motion kinematics were evaluated by computer assisted sperm analyzer using Makler counting chamber. Sperm motility (%) and motile sperm recovery rate showed similar pattern in all treatment groups. However, sperm motility (%) and motile sperm recovery rate were highest at $700{\times}g$ for 30 min through a discontionous Percoll density gradient of 1 ml 90%: 1 ml 45% Percoll. There were no significant differences in motion kinematics after various Percoll washings. These results suggest that force of centrifugation, centrifugation time, and Percoll volume significantly affect motile sperm recovery rate.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제22권1호
• /
• pp.121-133
• /
• 2020

Globally, the frequency and intensity of abnormal climate events are increasing. Since this can directly damage lives and property, it is important to establish and implement an appropriate maintenance strategy in response to abnormal weather. Facilities built in cold regions where cold wave or heavy snow occurs frequently can be more damaged by freeze-thaw than facilities located in other regions. However, there are no clear criteria for quantitatively identifying the damage of freeze-thaw and how to cope with it. Therefore, based on the results of indoor freezing tests, the freezing conditions considering regional climate characteristics were selected as one day at -14℃, two days at -7℃ or three days at -5℃. As a result, it was confirmed that they were in the freeze-thaw environment in order of Daegwallyeing (8.3 times), Cheorwon (5.3 times) and Taebeak (4.9 times) in Gangwon region. Through this study, the evaluation criteria of freeze-thaw of road tunnels were newly proposed. The freeze-thaw evaluation criteria of the road tunnel presented in this study can be used for the quantitative evaluation and maintenance strategy of tunnels in cold regions.

• Journal of the Korean Wood Science and Technology
• /
• 제28권4호
• /
• pp.41-50
• /
• 2000

Cement-bonded particleboard is being used as outdoor siding material all over the world, because this composite particularly bears a light weight, high resistance against fire, decay, and crack by cyclic freezing and thawing, anti-shock property, and strength enhancement. Construction systems are currently changing into a frame-building style and wooden houses are being constructed with prefabrication type. Therefore, they require a more durability at outdoor-exposed sides. In this study, the cement hydration property for Korean pine particle, Japanese larch particle and face- and middle layer particles (designated as PB particle below) used in Korean particleboard-manufacturing company was investigated, and the rapid manufacturing characteristics of cement-bonded particleboard by supercritical $CO_2$ curing was evaluated. Korean pine flour showed a good hydration property, however, larch flour showed a bad one. PB particle had a better hydration property than larch flour. The addition of $Na_2SiO_3$ indicated a negative effect on hydration, however, $MgCl_2$ had a positive one. Curing by supercritical $CO_2$ fluid gave a conspicuous enhancement in the performances of cement-bonded particleboards compared to conventional curing. $MgCl_2$ 3%-added PB particle had the highest properties, and $MgCl_2$ 1%-added Korean pine particle had the second class with the conditions of cement/wood ratio of 2.7, a small fraction-screened particle and supercritical curing. On the contrary, the composition of non-hammermilled or large fraction-screened particle at cement/wood ratio of 2.2 was poorer. Also, the feasibility for actual use of 3%-added, small PB particle-screened fraction was greatest of all the conventional curing treatments. Relative superiority of supercritical curing vs. conventional curing at dimensional stability was not so apparent as in strength properties. Through the thermogravimetric analysis, it was ascertained that the peak of a component $CaCO_3$ was highest, and the two weak peaks of calcium silicate hydrate and ettringite and $Ca(OH)_2$ were present in supercritical treatment. Accordingly, it was inferred that the increased formation of carbonates in board contributes to strength enhancement.

• Korean Journal of Animal Reproduction
• /
• 제22권2호
• /
• pp.187-194
• /
• 1998

In order to determine suitable conditions for rapid freezing of porcine embryos, the kind and concentration of cryoprotectants, sucrose concentrations, equilibration time and thawing temperature in freezing medium were examined in relation to the survival of frozen-thawed oocyte and embryos. The results obtained are as follows : 1. The suitable concentrations of cryoprotoctant in the freezing medium which consisted of TCM-199+20% FCS were 1.5M for glycerol, 2.0M for DMSO, 2.5M for ethylene glycol, and 2.0M for propanediol. The sucrose concentration of 0.25M in the medium was found to optimal because the survival rate was markedly higher at this concentration when compared to the others. The survival rate was relatively high when the frozen embryos were thawed at 30$^{\circ}C$ in the freezing medium containing 2.5M cryoprotectants. The equilibration periods of 2.0 and 5.0 minutes revealed the higher survival in the media containing 1.5 or 2.1M glycerol when compared to 10 and 15 minutes. 2. The fertilization rates of frozen-thawed follicular oocytes which matured in vitro for 1, 12, 24 and 48 hours were 6.7~26.7% depending on the maturation time, and the rates were relatively high for those matured for a short period of time. The survival rates of frozen-thawed oocytes which matured in vitro for certain periods and fertilized were 10.0~30.0% depending on the maturation time.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권4호
• /
• pp.766-771
• /
• 2016

This study examined the long-term durability of PC boxes, which was manufactured by low-carbon eco-friendly concrete using an alternative binder to cement and alternative fine aggregate to sand and microwave heat curing system to reduce the construction cost of a near-surface transit system. Based on the test results, the initial compressive strength of microwave heat cured concrete was higher than that of the steam cured concrete, but those were similar in the long-term age. In addition, there was no significant difference between the two curing conditions in the chemical resistance and the freeze-thawing resistance, and the chloride ion penetration level of the concrete cured by two methods was very low. Therefore, low-carbon eco-friendly concrete and microwave heat curing technology are expected to contribute to the economic construction of a near-surface transit system, and reduce carbon dioxide emissions and environmental impact.