• Fashion & Textile Research Journal
• /
• v.25 no.5
• /
• pp.651-660
• /
• 2023

This study aimed to research the local production of conductive composite yarn, a source material used in textile-type electrodes and circuits. The physical properties of an internationally available conductive composite yarn were analyzed. To manufacture the conductive composite yarn, we selected one type of conductive yarn with Ag-coated polyamide of 150d 1 ply, along with two types of polyethylene terephthalate (PET) with circular and triangular cross-sections, both with 150d 1 ply. The conductive composite yarn samples were manufactured at 250, 500, 750, and 1000 turns per meter (TPM). For both conductive composite yarn samples manufactured from two types of PET filaments, the twist contraction rate of the sample with a triangular cross-section was stable. Among the samples, the tensile strength of the sample manufactured at 750 TPM was the highest at approximately 4.1gf/d; the overall linear resistance was approximately 5.0 Ω/cm, which is within the target range. It was confirmed that the triangular cross-section sample manufactured with 750 TPM had a similar linear resistance value to the advanced product despite the increase in the number of twists. In future studies, we plan tomanufacture samples by varying the twist conditions to derive the optimal conductive yarn suitable for smartwear and smart textile manufacturing conditions.

• Clean Technology
• /
• v.10 no.3
• /
• pp.131-137
• /
• 2004

Due to the low biodegradability of dyes, conventional biological wastewater treatment systems are inefficient in treating textile wastewater. In this study, white rot fungus, Trametes versicolor KCTC 16781, were investigated for the decolorization of Reactive black 5 solutions. This fungus was able to degrade the dye solutions by the ligninolytic enzymes (laccase and MnP) produced. The enzyme activity remained constant until the end of reaction. The combined process of biological treatment and ceramic membrane showed better efficiency for decolorization and TOC removal than each single process.

• Food Science and Industry
• /
• v.51 no.1
• /
• pp.45-60
• /
• 2018

The starch industry in Korea had been based on sweet potato and potato for long time to produce starches which were used for mainly starch noodle such as cellophane noodle. Because of the poor storage stability, high price, and fluctuation of production by year and year of potatoes, the raw material for the production of starch had been changed to corn in 1970s. Along with this, the mass production system had been established, which enabled the production of various starch-related products including modified starches for food, textile, paper, and other industrial uses, starch sweetners, high fructose corn syrup, and gelatinized starch. In this paper, a brief background of corn industry in Korea has been described. The production of starch from corn has been emphasized and the future of corn industry in relation with GMO has been suggested.

• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.730-738
• /
• 2012

This study proposes a process to design and analyze stage costumes by design elements for the costumes of the Korean traditional music cantata 'I Will Rise'. This study states fundamental references to make costumes of similar performances in the future and develop costume designs based on the format of a play. The findings are as follows. First, the costume production process of 'I Will Rise' is conducted in the order of directing intentions and script analysis, costume design, miniature production, costume production, costume modification, run, and post-production. Second, an overall Korean silhouette is expressed through the creation of costumes based on the construction of Korean traditional clothing (hanbok); however, from a detail perspective, a modernistic sensitivity is expressed through the use of modern elements (wing shoulders attached to shoulders, narrow ribbons made in a string form, and wristlets and belts) not found in hanboks. Third, tie-dying is applied to the costume colors of each character to highlight the traditional and unique feeling of dye and symbolic colors that effectively represent each role used to communicate the storyline and character emotions to the audience. Fourth, materials for costumes are cotton and linen (frequently used to create the texture of a Hanbok) as the costume of each character is emphasized to the use of additional and detailed materials such as artificial leather, hemp, and silk.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.20 no.4
• /
• pp.175-186
• /
• 2018

These days, due to increased income levels, lower birthrate, and increased marriage age, interest and investment in children has increased, and infant & children's clothes has become more upgraded, differentiated, and diversified. In accordance with the change of the infant & children's clothes market, Examine the research trends of the papers in the journals. Used 'KISS', 'DBpia', 'Korea Institute of Science and Technology Information', in the search system, and 137 papers were searched for by using key word, 'infant's clothes' and 'children's clothes'. The year of publication is limited to 2001 to 2017, and they are classified into 5-year units and again the papers were classified by year, by journal, by field of clothing research (Technical Design & Production, Fashion Marketing, Textile System, Fashion Design), and frequency and percentage were used as data analysis. The number of articles related to infant & children's clothes increased such as 39 in 2001~2005, 43 in 2006~2010, and 55 in 2011~2017. The distribution of articles by journals has been published mainly in the journal of the Korean Society of Clothing and Textiles, but as the journals were diversified, they were distributed evenly in other journals related to the apparel. In the presentations according to the research field by year, from 2001 to 2005, the ratio of apparel design and production was high, but since 2006, many papers related to fashion marketing and fashion design have been published. The research contents of the field of clothing research are as follows: 41 articles in design production field, focusing on dimensional system and pattern design, 40 articles in fashion design field, focusing on design development and design preferences, 46 articles in fashion marketing field, focusing on consumer behavior and marketing management. And 10 articles in apparel material system field, focusing on research on cloth science materials, but they are less well studied than others, but these studies should be actively pursued in the future.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.5
• /
• pp.541-550
• /
• 2008

In this investigative study, the unit mass discharge for the major water quality parameters such as flowrate, SS, BOD, CODmn, CODcr, TN, TP from textile spinning/weaving industry nearby Nakdong river basin was estimated. To represent the respective industries, three companies from hundreds of textile spinning/weaving industries located in Nakdong river basin was carefully selected based on its manufacturing goods, flowrate and location for the estimation of unit mass discharge based on unit operation and process. There was a drastic decrease of unit mass discharge estimation between influents and effluents of water quality parameters, which represents the removal capacity of wastewater treatment plant. With the advent of new regulation on the imposed payment proportional to the total amount of pollutants discharge into the water body, the concept of cleaner production technology should be employed in the unit operation/process in wastewater treatment plant as well as textile manufacturing procedure to minimize the levy on the pollutants discharge. Unit mass discharge estimations of unit process (estimated in this study) in major water quality parameters (SS, BOD, COD, TN and TP) based on land were similar to those of composite process (estimated by National Institute of Environmental Research). But the unit mass discharge estimations of unit process in BOD and CODmn based on total sale were much higher than those of composite one while in SS, TN and TP similar to each other. For the detailed estimation of the imposed payment, unit mass estimation based on unit process should be further emphasized.

• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.42-54
• /
• 2009

The purpose of the study was to grasp problems through a basic survey of actual conditions of the Korean traditional costume industry and to grope a plan to settle the problems. The results were as follows. Operating Status: Rates of the companies' establishment were reduced in 2000s and their sales were also reduced. Status of Goods Development: Korean traditional costume manufacturers and Korean traditional costume textile fabric companies had the highest rate in non-trademark production. Korean traditional costume textile fabric companies and Korean traditional costume rental companies had high rate in self-design. However, Korean traditional costume manufacturers used textile companies' catalogue with the highest rate. Status of Demand and Supply in Human Resources: In human resources needing most, Korean traditional costume manufacturers were tailors, Korean traditional costume textile fBbric companies were salespersons and Korean traditional costume rental companies were designers. Status of Management and Marketing: Causes of difficulties in management were the market slump and the spreading of products made in China. They had a direct publicity through people around mainly. Therefore, it was urgently necessary to introduce special marketing methods. In an investment plan within three years in the future, about 70% did not have an investment plan. Opinions for Promotion of Korean traditional costume: In the government's support policy they wanted, construction of social atmosphere for Korean traditional costume-wearing and Korean traditional costume related educational support had the highest rate. Most of the companies answered that specialized Korean traditional costume agencies were necessary.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2005

This study was performed to analysis the operation process when fabric pattern design was done by the use of CAD system compared with the manual work in order to determine the operation efficiency with the application of fabric design CAD system. The results of the study were as follows: 1. since 160,000 colors were supported by CAD system, color proposed by consumer was able to match exactly according to the its design. However, exact color matching was not possible by manual work. 2. Woven state of back of pattern design could be identified simultaneously with face of it for CAD system, while face and back of the fabrics should be designed separatedly in case of manual work. 3. Since the combination of warp and filling yarn was compatible with the fabric density in one repeat unit in CAD system, exact size of pattern design to be woven was able to expressed. 4. Only simple graphical expression by manual work was seen, while with the CAD system, texture and shade effect as well as graphical expression could be expressed and so fault could be reduced in advance with the simulation of actual feeling of fabrics in the screen. In conclusion, when CAD system will be introduced to the textile industry, operation time of designing pattern can be reduced. Since the operation is easy and simple, a beginner can operate CAD system easily. Thus, production and wage costs can be saved and this can be related directly with the improvement of productivity which is the main purpose of introducing CAD system.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.85-96
• /
• 2002

Entering the period of Mass Customization, and with the help of the Digital Textile Printing technology, the purpose of this study is to propose two customer involved design process models, based on the Digital Textile Printing technology, and to compare their efficiencies and appropriateness with those of the existing design process model, which would lead us to discover the possibilities of Mass Customized design process. By the result obtained from the survey of 166 females in their twenties and thirties, the second Mass Customized design process model which gave most choices to prosumers was preferred the most, while the existing design process which gave no choice seemed to be preferred the least, and among the design elements of textile, color appeared to be the most significant influential factor in the preference of the clothing by the consumers. In summary, it appeared that every aspect of the society requires a shift in the process of the thought from Mass Production to Mass Customization at this point, and a guideline was made from the Mass Customized design process suggested in this study.

• Fashion & Textile Research Journal
• /
• v.15 no.5
• /
• pp.808-814
• /
• 2013

In this study, The mixture of three kinds of pre-treatment agents, Carboxymethyl cellulose sodium salt(CMC), Sodium alginate and Dextrin, have been prepared for the better coloration of digital textile printing. To get sharpness of outline during digital printing process, the optimal formulation is the CMC and Sodium alginate mixture 1:1 ratio by volume. Cyan, Yellow, and Black colours are excellent on the Sodium alginate mixtures. But, Magenta is excellent in the CMC and Dextrin mixture. Sharpness and printability are closely related to viscosity of the mixture. The most optimal sharpness of outline achieved with a consideration of coloring, and field operations account for production when the viscosity of the mixed pre-treatment agent approximately is 10~13 cSt. Change in shade and staining of wash fastness for all the treated samples with the mixtures rated 4-5 grade. Both dry rubbing fastness to shade change and staining are good in the treated samples, whereas wet rubbing fastness rated 2-3 grade. To improve wet rubbing fastness, the Sodium alginate and Dextrine mixture, which rated 3-4 grade for Black color, is applicable. With exception of 3 rating to black color, Light fastness is 4 rating for the remaining three colors in the regardless of treatment condition and mixing of the pre-treatment agent. Dry cleaning fastness of all samples are also 4-5 rating.