• Science of Emotion and Sensibility
• /
• v.14 no.3
• /
• pp.435-444
• /
• 2011

The development of ubiquitous healthcare technology and portable electronic devices requires new energy sources for providing continuous power supply. This study particularly focuses on an energy harvesting system capable of charging energy using clothing. One of the sources for energy harvesting is heat energy, which is the difference in temperature of the body and the surrounding environment. In this study, the skin temperature distribution of the human body was empirically measured to determine the basic materials needed to develop heat energy harvesting clothing. The distribution of skin temperature in different sections of the human body was analyzed. The analysis found that the skin temperature of the upper body was higher than that of the lower body. The area close to the heart with a lot of blood flow was especially high. The skin temperature of the back side of the body, such as the back of the neck, upper back, and waist, was higher than that of the front side of the body. As for the arms, the skin temperature of the upper arms was higher than that of the lower arms, and the skin temperature of the back side of the arms was lower than that of the front and the flank side of the arms. The difference in the average skin temperature and the environment temperature was highest at the back of the neck, and thereby is considered to be the most appropriate section to integrate the heat energy harvesting function and structure. The following sections had the next highest difference in values, listed in descending order: the back of the waist, the sides of shoulders, the front chest area, the front side of the upper arms, and the front abdomen. Based on the skin temperatures of the different sections of the human body, this study outlines the basic guidelines for developing heat energy harvesting clothing.

• Journal of Conservation Science
• /
• v.30 no.4
• /
• pp.353-364
• /
• 2014

Formaldehyde(HCHO) may have a damage effect on Korean traditional textiles, because concentration is high and occurrence frequency is frequent at the exhibition room and storage area. Total 20 specimens were prepared using 4 different materials (silk, cotton, ramie, hemp) after dyeing with 5 colors (undyed, red, yellow, blue, black). The specimens were exposed to HCHO gas in the test chamber. The gas acceleration test was conducted to identify the deterioration of Korean traditional textiles according to HCHO concentration(0.5, 1, 10, 100, 500ppm), to temperature-humidity condition at HCHO 500ppm, and deterioration conditions at HCHO 500ppm. Optical, chemical, and physical evaluation was carried out after the exposure. The results, color difference, grey scale rating, formate($HCO_2{^-}$) of some textiles increased at 500ppm, while pH decreased at 500ppm. Also, color difference, grey scale rating, formate($HCO_2{^-}$) of some textiles increased double damage at high temperatures & humidity, high humidity condition. But, damages of accelerated degradation textiles were slight, because of degradation degree and degradation products. The results suggest that determined the damage to the korean traditional textile, damage level, damage-weighted condition, damage to accelerated degradation textiles. In addition, formaldehyde damaged to yellowing of red textiles, bleaching of accelerated degradation textiles, formic acid damaged to bleaching of total 20 specimens.

• 보존과학연구
• /
• s.34
• /
• pp.20-29
• /
• 2013

Paper, textile and wood materials are mainly consisted of cellulose. Cellulose is high molecule and make up the strong crystalline structure by hydrogen bonds. In particular, the polymerization degree of cellulose are closely related to the strength of fiber, and the permanence. the useful life of fiber, also depends on the degradation of this substance. The viscosity of cellulose is considered to be an important indicator of fiber damage in high molecule polymers. The viscosity measurements with CED solution is used to measure the molecular weight and the degree of polymerization of cellulose. Cellulose viscosity of wood fibers is measured with TAPPI standard method T230. However, TAPPI standard method T230 is difficult to completely dissolving the cellulose of high molecular weight and large degree of polymerization, such as Korea traditional papers and fabrics made with mulberry, ramie, cotton fibers. In this study, The high viscosity of hanji and fabric was measured with TAPPI standard method T254. T254 method is that the cellulose specimen with the proper amount of weaker (0.167M CED) solution, and completely dissolved with the stronger (1.0M CED) solution. It was found that cellulose with high degree of polymerization was dissolved more easily in general CED method.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.281-286
• /
• 2012

Experimental study was performed regarding the effects of disc-like filler orientation and contents on the coefficient of thermal expansion (CTE) of polypropylene composites using the three dimensional ellipsoids ($a_1$ > $a_2$ > $a_3$) analyzed by two aspect ratios(${\rho}_{\alpha}=a_1/a_3$and ${\rho}_{\beta}=a_1/a_2$). Measured data were compared with the theoretical approaches proposed by Lee et al. Mica and talc were useed as disk-like fillers in the composites. As experimental results, ${\alpha}_{11}/{\alpha}_m$ decreased down to ca. 0.56 with mica content of 20 wt% and the aspect ratios, ${\rho}_{\alpha}=13.5$, ${\rho}_{\beta}=1.8$. However, ${\alpha}_{33}/{\alpha}_m$ increased to more than 1. In the case of talc, ${\alpha}_{11}/{\alpha}_m$ decreased to ca. 0.63 with 20 wt% and ${\rho}_{\alpha}=3.7$, ${\rho}_{\beta}=1.4$. Finally, the longitudinal CTEs (${\alpha}_{11}$) of polypropylene composites decreased as filler contents increased, but normal CTE (${\alpha}_{33}$) increased in the low filler contents like the theory.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.1
• /
• pp.51-75
• /
• 2007

Dongdaemun fashion market has been successfully positioned as a main hub for non-brand fashion product distribution in Korea. One of important competitive advantages of Dongdaemun market often quoted by retail researchers is an efficiently managed network system among supply chain members. This study aimed to examine the importance of buyer-supplier relationship elements and supplier properties from buyers' perspectives (small & very small-sized fashion stores in Dongdaemun market), and to identify the determinants of the relationship length between suppliers and buyers. Survey responses of 233 stores were analyzed using EQS 6.1 for Window and SPSSWIN 10.0. The findings could be summarized as follows: First, fashion stores perceived that right delivery as the most important factor, and geographically closeness, design capability, quality, and lower price followed in order. Second, the characteristics of stores such as location, wholesaling versus retailing focusing, monthly sales, and total business length all affected the perceived importance of buyer-supplier relationship. Third, design capacity, communication, power was identified as determinants of actual relationship length with a supplier, while communication and trust were found to be determinants of future expected relationship length.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9367-9373
• /
• 2014

In diagnosis of lung cancer, rapid distinction between small cell lung cancer (SCLC) and non-small cell lung cancer (NSCLC) tumors is very important. Serum markers, including lactate dehydrogenase (LDH), C-reactive protein (CRP), carcino-embryonic antigen (CEA), neurone specific enolase (NSE) and Cyfra21-1, are reported to reflect lung cancer characteristics. In this study classification of lung tumors was made based on biomarkers (measured in 120 NSCLC and 60 SCLC patients) by setting up optimal biomarker joint models with a powerful computerized tool - gene expression programming (GEP). GEP is a learning algorithm that combines the advantages of genetic programming (GP) and genetic algorithms (GA). It specifically focuses on relationships between variables in sets of data and then builds models to explain these relationships, and has been successfully used in formula finding and function mining. As a basis for defining a GEP environment for SCLC and NSCLC prediction, three explicit predictive models were constructed. CEA and NSE are requentlyused lung cancer markers in clinical trials, CRP, LDH and Cyfra21-1 have significant meaning in lung cancer, basis on CEA and NSE we set up three GEP models-GEP 1(CEA, NSE, Cyfra21-1), GEP2 (CEA, NSE, LDH), GEP3 (CEA, NSE, CRP). The best classification result of GEP gained when CEA, NSE and Cyfra21-1 were combined: 128 of 135 subjects in the training set and 40 of 45 subjects in the test set were classified correctly, the accuracy rate is 94.8% in training set; on collection of samples for testing, the accuracy rate is 88.9%. With GEP2, the accuracy was significantly decreased by 1.5% and 6.6% in training set and test set, in GEP3 was 0.82% and 4.45% respectively. Serum Cyfra21-1 is a useful and sensitive serum biomarker in discriminating between NSCLC and SCLC. GEP modeling is a promising and excellent tool in diagnosis of lung cancer.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.483-493
• /
• 2014

In a modern society where various kinds of cultures coexist, kidult culture seeking something pleasant and interesting in the adult culture has made an appearance affected by pop art. The goal of this study is to help the kidult culture carrying on the feature of pop art to promise a bright future in the consumer market and to help kidult marketing through the expansion of globalization of kidult culture goods. The first study method was to refer to the theoretical research material like theses or academic journals to analyze the feature of pop art and cultural phenomenon. The second one was to analyze media reports, TV programs, movies, and ads currently in issue about kidult cultures in news, media data, and internet materials to feel the kidult cultural phenomenon at the moment. The result of this study shows that, especially, popularity, vividness, and sense of humor and wit among the features of pop art have a great influence on the kidult culture. As a result, Firstly, We can expect a vitalization in the consumer market through qualitative and quantitative improvement of kidult consumer culture. Secondly, We should make an effort to expand kidult consumer culture by developing various kinds of culture goods for each age groups. Thirdly, Domestic companies should open up an adult consumer market with self-developed character products. Fourthly, We should make an aggressive marketing strategy for kidult culture goods in the world market in the flow of Hallyu.

• Journal of Preventive Medicine and Public Health
• /
• v.10 no.1
• /
• pp.94-101
• /
• 1977

Noise pollution, both in the environment and in the workplace, has been recognized as a major health hazard -one that can impair not only a person's hearing but also his physical and mental well-being. As industrialization progresses, the prevalence rate of occupational diseases is increasing, especially hearing loss, which has the highest prevalence rate among the occupational diseases. The major cause of noise is the construction of various large industries without any regulation of noise sources. Therefor, we must establish an enactment to control mechanical noise sources. as soon as possible. For the purpose of controlling the noise source, we must have exact data about such things as the sound level, the frequency of the peak sound and the revolutions per minute (r.p.m.) of the machine (a measure of the power of its motor). This study was undertaken in order to define the noise characteristics, the power of the machine's motor, the change of the sound level and the peak sound as the r.p.m. increases, and the permissible exposure time. The sample size of this study was 74 machines at 11 plants in 6 industries. The results are as follows; 1. The breakdown of the types of mechanical noise noted was : 63.6% continuous normal sound, 26.9% intermittent sound, 4.7% continuous repeating sound and 4.6% impulsive sound. 2. With respect to the type of industry, the overall sound level was the highest in the mechanical industry, with $103.8{\pm}2.8dB(A)$, and lowest in the textile industry, with $89.2{\pm}1.43dB(A)$. 3. With respect to the type of machine, the highest sound level was 124 dB(A) caused by Gauzing(II), in the mechanical industry, and the lowest was 76 dB(A) caused by Attachment (Jup Chack) (I) in the timber industry. 4. The shortest permissible exposure time to Gauzing(II) in the mechanical industry was less than 15 minutes. 5. Among 74 machines, 68.2% of the peak sound was situated in the high frequency range (52.7% at 2 KHz, 4.1% at 4 KHz and 1.4% at 8 KHz). 41.8% of the peak sound was in the middle frequency range (4.1% at 250Hz, 14.8% at 500Hz and 22.9% at 1KHz). 6. If one machine had two motors or more, the peak sound was shifted to the low frequency range. 7. As the r.p.m. increased, the overall and peak sound levels were increased without any change of the frequency of the peak sound. 8. Whenever the machines had the same kind and the same r.p.m., the overall and peak sounds were changed by the physicochemical characteristics of the raw materials and the management.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5107-5110
• /
• 2013

Background: Among women with haematuria, defining individuals under high risk for bladder cancer based on reproductive factors prior to cystoscopy would be of great benefit in the management of this condition. The aim of this study was to compare age and reproductive factors such as menopausal status, parity, age at first delivery and age at the last delivery between women who have haematuria with or without bladder cancer. Materials and Methods: A total of 463 patients underwent diagnostic cystoscopy in D$\ddot{u}$zce University Faculty of Medicine between 1 June 2008 and 1 June 2013. Female patients who presented with persistent microscopic or macroscopic haematuria and underwent standard evaluation for haematuria including urinalysis, urine culture, urine cytology, urinary tract imaging with excretory urography or computerized tomography with contrast enhancement and endoscopic evaluation of the urethra and bladder were included in this study. Exclusion criteria were tobacco use and high risk occupations for bladder cancer such as textile, dry cleaning, painting and etc. Forteen women had hematuria due to benign conditions, and 18 due to bladder cancer. Data were retrospectively retrieved from the medical records of Duzce University Hospital. Results: Patients with haematuria due to benign reasons did not significantly differ from patients who were found to have bladder cancer in terms of age (p=0.28), menopausal status (p=0.29), mean parity (p=0.38), being nulliparous (p=0.57), parity ${\geq}3$ (p=0.22), age ${\leq}18$ years at first delivery (p=1.00), age ${\geq}30$ years at last delivery (p=0.26), age ${\geq}35$ years at last delivery (p=0.23) and percentage of the patients with advanced age (${\geq}65$ years) (p=0.18). Conclusions: It is difficult to predict a high risk for developing bladder cancer in women with haematuria based solely on reproductive factors.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.463-469
• /
• 2015

In this study, to improve bending strength performance of Korean white pine, we made the curved composite glulam that was reinforced with glass fiber materials and larch lamina. Five types of Korean white pine curved glulams were made depending on whether they had been reinforced or not and how they had been reinforced. Type-A, reference specimen, was produced only with Korean white pine lamina, and Type-B was with larch lamina in the same thickness. Type-C was made by inserting a glass fiber cloth of textile shape between the each layer. Type-D was reinforced with two glass fiber cloths, which were placed inside and outside of the outermost lamina. Type-E was reinforced with GFRP sheet in the same way as Type-D. As a result of this bending strength test, the modulus of rupture (MOR) of Type-B, Type-C and Type-E were increased by 29%, 6%, and 48% in comparison with Type-A. However, MOR of Type-D was decreased by 2% in comparison with Type-A. In the failure modes, Type-A, Type-B and Type-C were totally fractured at the maximum load. However, load values of Type-D and Type-E decreased slowly because of reinforcement of fracture suppression, and the GFRP sheet (Type-E) had better reinforcing effect on compressive stress and tensile stress than the glass fiber cloth (Type-D).