• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.194-206
• /
• 2010

This study was carried out to identify the optimum dyeing conditions for maximum dye uptake of Prunus yedoensis Matsumura flower extract on silk fabric and to investigate hue/tone characteristics and fastness properties of the dyed fabrics. As results, the flower extract was found to contain flavonoids by FT-IR and to show yellowish shade by UV-vis spectrum. Silk fabric was optimized for maximum dye uptake to five repetitions of dyeing at $80^{\circ}C$ for 60 min with an extract concentration of 600% owf in terms of both K/S and color differences. Pre-mordanting was more effective to dye uptake than post-mordanting for all of the mordants used. Un-mordanted and pre-mordanted fabric showed YR(Yellow Red) while most of post-mordanted ones did Y(Yellow). Main tones of dyed fabrics were sf(soft) and lt(light) in the case of unmordanting or Al-mordanting whereas they were d(dull) and g(grayish) by post-mordanting with Cu, Cr, and Fe, respectively. The fastness grades to rub and dry cleaning were reasonably good for most dyeing conditions while those to light were poor. Finally dyeing condition for each hue/tone of the dyed silk with the flower extract was optimized considering fastness properties.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.297-304
• /
• 2014

In this study, we investigated the relationship between the adsorption property of Methyl violet or Tartrazine dye onto silica sol surface and surface charge density of the sol. The adsorption ratio of Methyl violet dye on silica sol decreased to 74% and 92% for the 68nm and 94nm silica sol, respectively, at dye concentration of $175{\mu}g/m^2$. However, the adsorption ratio of Tartrazine dye on 68nm and 94nm silica sol was about 0% for both of them. The surface charge density is $-0.40C/m^2$, $-0.26C/m^2$ for 68nm and 94nm silica sol, respectively. The amount of Methyl violet dye adsorbed on silica sol increased with an increase of surface charge density of particle at the same concentration of the dye. The adsorbed amount of the silica having high surface charge density is larger at high pH domain. But adsorbed amount of the silica having low surface charge density is larger at low pH domain.

• Textile Coloration and Finishing
• /
• v.30 no.1
• /
• pp.9-19
• /
• 2018

To prepare bio-inspired antifouling coating materials having similar structure with lotus, self-crosslinkable waterborne polyurethanes emulsions containing paraffin wax (CWPU/P0, 0.25, 0.5, 1.0, 1.5, 2.0, the number indicated the wt% of wax) were prepared by an emulsifier-free/solvent free prepolymer mixing process. The as-polymerized CWPU/P emulsions containing 0 - 1.00wt% of paraffin wax were found to be stable after 4 months, however, CWPU/P emulsions containing 1.50 and 2.00wt% of paraffin wax were unstable within 1 month storage. Considering the stability of emulsions, the optimum paraffin wax content was found to be about 1wt% to obtain stable antifouling coating emulsion material. The surface topology of CWPU/P film samples was characterized by atomic force microscopy (AFM). This study examined the effect of paraffin wax content on the surface roughness, water contact angle/surface energy, water swelling, light transmittance and tensile properties of CWPU/P film samples.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.29-45
• /
• 2012

The purpose of this study is for providing not only the latest design technique trend for zero waste fashion, but information about creative fashion design education through eco-fashion industry trend in globally and domestic which is focusing on eco-fashion labelling. The research were processed with literature related eco, sustainable, green fashion books, former articles, newspapers, and web sites. The results as follows; The certification about eco-fashion product is moving to 'Life Cycle Assessment' from focused on primary process like material, finishing, dyeing. Especially simplicity of process means reducing the wastes. And fabric wastage for adult outwear was estimated 15% percent of total fabric used in general design studios. Three cases for Zero waste fashion were as follows; First, Jigsaw puzzle by Timo Rissane and Mark Liu were different zero waste methods, but the result was same. Rissene's method was based on traditional cutting like 'cut and sew' but traditional cutting can lead to design that have an abundance of fabric and drape. Jigsaw of Rissene was approached with description a pattern-cutting technique in which all piece interlock with each other generating no waste from design production. Another Jigsaw by Liu was related with innovative textile design. DTP makes the possibilities for zero waste garment production almost endless. The dress intricately cut from 10 pieces, wastes none of the fabric required to make it. Second, Subtraction Cutting by Julian Roberts provides unexpected fluid, organic forms and zero waste fabric. Utilizing Roberts plug(tunnel) technique enables any part of the garment that is removed for fit or aesthetics to be reincorporated into the design of garment. Third was 'Bio Couture' by Suzanne Lee. She has created garments from cellulose bacteria which grow in a bathtub using only green methods addressing in such as way ecological issues and exploring the future of fashion design in conjunction with technology.

• Textile Coloration and Finishing
• /
• v.10 no.1
• /
• pp.25-32
• /
• 1998

In the prior study, we found that the dye uptakes of C. I. Disperse Violet 1 on PET in hexane and cyclohexane were higher than those in the other solvents. Therefore, in this study, the dye uptakes and the partition coefficients in alkanes having different number of carbon atoms were obtained and their relationship to the solubilities of the dye in alkanes was also investigated. As the number of carbon atoms of alkanes increases, solubility of the dye increases but the dye uptake decreases. This is due to the fact that the hydrophobicity of alkanes become relatively strong as increasing the number of carbon atoms. It was also found that the dye uptakes in iso-alkanes were larger than those in normal alkanes. This is because that the branched alkanes(iso-alkanes), judging from the tendency of lowering solubility and increasing dye uptake as decreasing the number of carbon atoms of alkanes, behave like the alkanes with less number of carbon atoms rather than the alkanes with the same number of carbon atoms. The logarithmic plot of the dye uptakes vs. the solubilities of the dye showed that the dye uptakes are linearly and inversely proportional to the solubilities. This is in good accordance with the results of the prior study. The heat of dyeing was also calculated from the equilibrium adsorptions at various temperatures. It seemed that the dyeings of PET by C. I. Disperse Violet 1 in nonane, decane, iso-pentane and iso-octane were rather endothermic processes. Dyeing rates in alkanes were somewhat delayed unlike general appearances in solvent dyeing.

• Textile Coloration and Finishing
• /
• v.6 no.3
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.83-89
• /
• 1996

Carbon black has been used as a particulate soil to prepare artificial soiled fabrics for detergent study but it has two major defects. The one is the difficulty of quantitative analysis of carbon black for evaluate the detergency, the other is that there is no reliable correlation between the removal of carbon black and oily soil which is the major component of natural soil. In this study ferric oxinate was used as a particulate soil since it is in black color and can be soiled on fabric by suspension in water or by solution in chloroform and it is easily analysed quantitatively by extracting it from soiled fabric with chloroform to get correct value of soil removal. The characteristics of soil removal of ferric oxinate were compared with that of carbon black and Sudan black, an oil soluble dye, which had been proved that it's detergency correlated with that of oily soil The soil removal of ferric oxinate and Sudan black estimated from quantitative analysis and from K/S value were in good agreement whereas the result calculated by simple reflectance was consistently low. The soil removal of ferric oxinate was exceeded from that of carbon black without regard to surfactants, Triton and Las, but the effect of washing conditions such as temperature and washing time on soil removal of both soils with different suffactants showed no considerable difference. Though the soil removal of Sudan black was little effected by the conditions, the soil removal in Triton exceeded considerably that of in Las, which is the characteristic of oily soil. Thus the soil removal of Sudan black was in good agreement with ferric oxinate in Triton, a non-ionic surfactant, and with carbon black in Las, an artionic surfactant. We concluded that ferric oxinate is a more realistic model particulate soil for artificial soiled cotton fabric washed with non-ionic surfactant than carbon black.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.281-287
• /
• 2015

The aim of this study was to investigate the possibility utilizing Metasequoia(Metasequoia glyptostroboides) cone as a new natural dye resource. In previous study, dyeing onto cotton fiber was carried out and Metasequoia cone colorant showed low affinity to cotton fiber and maximum dye uptake was obtained at pH 3.5 showing YR Munsell color. For further evaluation of its efficacy as a new natural dye resource, effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated for silk fiber. Metasequoia cone colorant showed good affinity toward silk fiber showing YR Munsell color and maximum dye uptake was shown at pH 3.5. Post-mordanting with Cu and Fe improved dye uptake, especially Fe($C_5H_{10}FeO_6$) mordant was effective as much as 2 times higher dye uptake comparing with un-mordanted sample. The color of dyed fabrics with mordanting showed YR Munsell color. Fe mordanted fabrics appeared dark gray~black color. Colorfastness to washing was relatively good, whereas lightfastness of the dyed fabrics showed grade 2. It was confirmed that Metasequoia cone colorant can be used as a new dye resource for silk fiber getting brownish yellow to dark gray/black color depending on mordant type. In addition, it showed antimicrobial functionality.

• Textile Coloration and Finishing
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.10-20
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional fresh juice extract dyeing. Three kinds of leaf powder colorants were prepared by freeze drying method with or without deep freezing as pre-treatment: one powder colorant from fresh leaf juice with deep freezing; two kinds of powder colorant from fresh leaves with and without deep freezing. Their dyeing properties and storage stabilities were studied and compared with the traditional fresh juice extract dyeing. The presence of indigo in the powder colorants was confirmed by UV/Visible absorption spectra. They showed absorption peak at 602nm which was same with indigo absorption peak. Dyeing was done at low temperature around 6$^{\circ}C$. All three powder colorants produced B colors on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants from leaves gave higher color strength than the powder from leaf juice. The powder colorant prepared from leaves with deep freezing was the most stable for long term storage as its color and color strength were not changed after 360 days. So, this was used for further dyeing to study the effects of concentration and repeat dyeing on color strength and colorfastness. Fastnesses to dry cleaning and rubbing were fairly good above 4 rating. Further study is needed to improve light fastness. It was concluded that the leaf powder colorant with deep freezing could be used as a substitute for traditional juice extract dyeing at all seasons.