• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.102-108
• /
• 2004

This study addresses the contamination sensitivity test of a typical fuel pump for automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of fuel pump on specific contaminant particle sizes so that optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of fuel pump was measured under the experiments of various contaminants size ranges of ISO test dust up to 80${\mu}{\textrm}{m}$. The fundamental theory of contamination sensitivity was introduced and the contamination sensitivity coefficients were estimated using the experimental data. Maximum contamination sensitivity coefficient of $5{\times}10^{-6}$ L/minㆍEa was found on the contaminant size range of 40${\mu}{\textrm}{m}$∼50${\mu}{\textrm}{m}$. The magnified picture of the surface of vane disc revealed that the abrasive wear was the principal cause of discharge flow rate degradation. Hence, this study revealed that high efficiency filter on the contaminant particle size range of 30${\mu}{\textrm}{m}$∼70${\mu}{\textrm}{m}$ especially should be used to maintain the service lift of the fuel filter.

• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.767-788
• /
• 2004

The classical 8-node isoparametric serendipity element uses parametric shape functions for both test and trial functions. Although this element performs well in general, it yields poor results under severe mesh distortions. The distortion sensitivity is caused by the lack of continuity and/or completeness of shape functions used for test and trial functions. A recent element using parametric and metric shape functions for constructing the test and trial functions exhibits distortion immunity. This paper discusses the choice of parametric or metric shape functions as the basis for test and/or trial functions, satisfaction of continuity and completeness requirements, and their connection to distortion sensitivity. Also, the performances of four types of elements, viz., parametric, metric, parametric-metric, and metric-parametric, are compared for distorted meshes, and their merits and demerits are discussed.

• 소성∙가공
• /
• 제19권8호
• /
• pp.494-501
• /
• 2010

The main objective of this study is to examine the sensitivity of calibration curves of FEA of ring compression test to frictional shear factor. Ring compression test has been investigated by measuring dimensional changes at different positions of ring specimen and they include the changes in internal diameter at the middle and top section of the specimen, outer diameter at the middle and top section, surface expansion at the top surface, respectively. Initial ring geometries employed in analysis maintain a fixed ratio of 6 : 3 : 2, i.e. outer diameter : inner diameter : thickness of the ring specimen, which is generally known as 'standard' specimen. A rigid plastic material for different work-hardening characteristics has been modeled for simulations using rigid-plastic finite element code. Analyses have been performed within a definite range of friction as well as over whole range of friction to show different sensitivities to the interfacial friction for different ranges of friction. The results of investigation in this study have been summarized in terms of a dimensionless gradient. It has been known from the results that the dimensional changes at different positions of ring specimen show different linearity and sensitivity to the frictional condition on the contact surface.

• 한국콘텐츠학회논문지
• /
• 제9권2호
• /
• pp.339-349
• /
• 2009

마늘은 오랫동안 그 가치가 높이 평가되고 있으며 약용, 항균 및 살균효과적인 특성으로 인해 실제로 사용되어오고 있다. 본 연구는 마늘추출물의 천연식품보존제 개발가능성을 알아보기 위해 수행되어졌으며 신선한 마늘추출물과 이를 증류수로 희석한 마늘추출물들을 사용하여 6종의 식중독균 즉, S. aureus, E. coli, S. typhimurium, V. parahemolyticus, B. subtilis, L. monocytogenes들에 대한 감수성검사를 실시하였고 그 결과를 그람양성균 치료에 사용되는 Vancomycin과 그람음성균 치료에 사용되는 Imipenem을 대조로하여 이들 균주에 대한 항균력과 비교하였다. 마늘추출물에서 6균주 모두에 대해 강한 감수성을 보이거나 혹은 중등도의 감수성을 보였는데 V. parahemolyticus만은 마늘추출물의 원액에서만 항균력이 나타났고 희석한 농도에서는 항균력이 없었다.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.20-30
• /
• 1994

The lossless bounded real(LBR) two-pair cascade structure is one of the exiting low-sensitivity digital filter structures such as wave digital filters(WDFs) orthogonal filters. They are known to have the same structures which are composed of canonic building blocks interconnected to each other. The LBR two-pair cascade filters amount to describing in a unified manner the existing canonic low-sensitivity filters in terms of transfer matrices and chain matrices. However the existing structures have somewhat degraded low-sensitivity performance because they include dependent parameters within their structures. In this paper we propose a filter structure called “two-type-interlaced(TTI) structure.” eliminating such problem completely. This structures can be viewed as the WDFs of analog ladder circuits. As ladder circuits are obtained by cascading Brune sections and merging neighboring inductors or capacitors. so TTI structures at e obtained by cascading Type 3 LBR two-pairs and merging neighboring Type 1 LBR two-pairs. Next, a test procedure called “LBR test” is also presented in this paper. which determines whether of not the quantized TTI structure is stable . If it is unstable we can fine-tune the quantized parameters to make the overall structure stable. Therefore we can solve the dependent parameter problem completely with TTI structure along with LBR test. test.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권2호
• /
• pp.657-660
• /
• 2015

Background: A diagnosis of H. pylori infection can be made by invasive or non-invasive methods. Several noninvasive diagnostic tests based on the detection of H. pylori stool antigen (HpSA) have been developed. The Genx H. pylori stool antigen card test is a new rapid, non-invasive test that is based on monoclonal immunochromatographic assay. The aim of this study was to determine its sensitivity, specificity, and diagnostic accuracy for diagnosing H. pylori infection in adult patients. Materials and Methods: A total of 162 patients were included in the study. A gastric biopsy was collected for histopathology and rapid urease testing. Stool specimens for HpSA testing were also collected. Patients were considered H. pylori positive if two invasive tests (histological and rapid urease tests) were positive. Results: Using the reference test, 50.6% of the samples were positive for H. pylori infection. The Genx H. pylori antigen test was positive in 19.7% of patients. The sensitivity, specificity, positive predictive value, negative predictive value, and diagnostic accuracy of the Genx H. pylori antigen test were 51.6%, 96.0%, 88.8%, 76.1%, and 79.0%, respectively. Conclusions: The Genx H. pylori stool antigen card test is a new non-invasive method that is fast and simple to perform but provides less reliable results.

• Parasites, Hosts and Diseases
• /
• 제47권4호
• /
• pp.427-429
• /
• 2009

To establish a definite diagnosis for pulmonary hydatid disease, combination of radiology and serology is useful. In this study, 19 preoperative sera from patients with surgically confirmed pulmonary hydatidosis, 40 sera from patients with other parasitosis and pulmonary diseases, and 20 sera from healthy donors were evaluated using 4 different serological tests, i.e., the commercial ELISA (ELISA-kit) test, the ELISA (ELISA-lab) test prepared in our laboratory, the commercial indirect hemagglutination assay kit (IHA-kit) test, and the IHA test using sensitized sheep red blood cells with tannic acid (IHA-TA). The ELISA-kit was the most sensitive (84.2%) and the most specific test (100.0%). The ELISA-kit also demonstrated the highest positive (100.0%) and negative (95.2%) predictive values. The sensitivity of the ELISA-lab test, that we prepared, was found to be 73.6%, whereas the IHA-kit test and the IHA-TA test were found to be 73.6% and 68.4%, respectively. The specificity of these tests was 96.6%, 98.3%, and 83.3%, respectively. When all 4 tests were assessed together, it was found that the sensitivity had risen to 94.7%. When the ELISA-kit was assessed with the IHA-kit and IHA-TA together, it was found that the sensitivity was 89.5% and 84.2%, respectively. Likewise, the combination of the ELISA-lab and IHA-kit or IHA-TA allowed us to achieve a sensitivity of 84.2% in cases of pulmonary echinococcosis. In conclusion, the diagnosis would be imminent if least 2 tests were applied together.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.87-95
• /
• 2017

PURPOSES : The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength. METHODS : The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at $-10^{\circ}C$, $5^{\circ}C$, $20^{\circ}C$, $40^{\circ}C$, and $54^{\circ}C$ under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent. RESULTS AND CONCLUSIONS : Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from $5^{\circ}C$ to $40^{\circ}C$, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

• 한국항해항만학회지
• /
• 제32권8호
• /
• pp.603-609
• /
• 2008

Manta형 무인잠수정(Manta-type Unmanned Undersea Test Vehicle, 이하 MUUTV라 함)은 Naval Undersea Warfare Center의 Manta Test Vehicle의 설계 및 운용 개념을 기초로 하여 제안되었다(손 등, 2006). 본 연구에서는 Feldman(1979)과 손 등(2006)의 6자유도 운동 수학모델을 이용하여 MUUTV의 조종운동 특성에 미치는 유체력미계수의 민감도 해석을 수행하였다. 민감도 해석 기법으로는 Sen(2000)이 제안한 방법을 채택하였다. 본 연구를 통하여 각각의 유체력미계수가 MUUTV의 조종운동 특성에 미치는 영향을 정량적으로 파악할 수 있었으며, 상대적으로 영향을 작게 미치는 유체력미계수가 포함된 항을 제거하여 조종운동 수치 시뮬레이션을 수행하여도 운동 추정이 가능함을 알 수 있었다.

• 패션비즈니스
• /
• 제16권5호
• /
• pp.164-177
• /
• 2012

The purpose of this study was to classify sex role identity into groups and analyze the difference of social face sensitivity and appearance management behaviors by sex role identity. Questionnaires were administered to 306 people in their twenties and thirties living in Daegu Metropolitan City and Kyoungbuk province. The data was analyzed by using frequency, factor analysis, credibility, ${\chi}^2$-test, ANOVA, Duncan-test, and t-test. The findings were as follows. Sex role identity were classified into four groups (androgyny, masculineness, feminineness, and undifferentiation). Men in androgyny group showed the highest rate of 41.3% followed by undifferentiation(24.7%), masculineness(21.3%), and feminineness(12.7%). Women in undifferentiation group showed the highest rate of 35.9% followed by feminineness(24.4%), androgyny(23.7%), and masculineness(16.0%). Social face sensitivity were composed of four factors (consciousness of being embarrassed, social formality, other consciousness, and prestige). Appearance management behaviors were composed of six factors (skin management, fashion image management, plastic surgery management, weight management, hair management, and health management). According to the result of a significant difference between social face sensitivity and appearance management behaviors by sex role identity, male showed significant difference between the sub-variables of social face sensitivity factors (consciousness of being embarrassed, social formality, and other consciousness). Both of the male and female showed a significance of difference in consciousness of being embarrassed, and social formality. Male showed significant difference between the sub-variables of appearance management behaviors factors (fashion image management, weight management, hair management, and health management). Both of the male and female showed a significance of difference in fashion image management. Gender of twenties and thirties showed distinction between the sub-variables of social face sensitivity factors (consciousness of being embarrassed, and prestige) and appearance management behaviors (skin management, fashion image management, plastic surgery management, weight management, and hair management).