• Industrial Engineering and Management Systems
• /
• v.9 no.3
• /
• pp.262-274
• /
• 2010

This article investigates how to adaptively predict the time-varying metrology delay that could realistically occur in the semiconductor manufacturing practice. Metrology delays pose a great challenge for the existing run-to-run (R2R) controllers, driving the process output significantly away from target if not adequately predicted. First, the expected asymptotic double exponentially weighted moving average (DEWMA) control output, by using the EWMA and recursive least squares (RLS) prediction methods, is derived. It has been found that the relationships between the expected control output and target in both estimation methods are parallel, and six cases are addressed. Within the context of time-varying metrology delay, this paper presents a modified recursive least squares-linear trend (RLS-LT) controller, in combination with runs test. Simulated single input-single output (SISO) R2R processes subject to various time-varying metrology delay scenarios are used as a testbed to evaluate the proposed algorithms. The simulation results indicate that the modified RLS-LT controller can yield the process output more accurately on target with smaller mean squared error (MSE) than the original RLSLT controller that only deals with constant metrology delays.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.10
• /
• pp.23-34
• /
• 2020

The paper revisits the author's previous paper to examine short-run and long-run dynamic relationships between macroeconomic variables and stock prices in Korea. The data is updated to the period for which monthly data are available from January 1986 to June 2018 (390 observations) retrieved from the Bank of Korea. The results of Johansen cointegration test indicate that at least one cointegrating equation exists, confirming there is a long-run equilibrium relationship between macroeconomic variables and stock prices in Korea. The results of vector error correction estimates confirm that: 1) the coefficient of the error correction term is significant with a negative sign, which is, a long-run dynamic relationship is observed between macroeconomic variables and stock prices; 2) for short-run dynamics, the nominal exchange rate of the Korean won per the US dollar is positively related to stock prices, while interest rates are negatively related to stock prices in the short-run; 3) the coefficient of global financial crises is insignificant, that is, the changes of stock prices are determined largely by their own dynamics in the model. The results suggest only that the global financial crises neither cause instability in the cointegrating vector, nor affect significant changes in the endogenous variables in the model.

• Journal of Coastal Disaster Prevention
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2014

In order to examine the characteristics of tsunami run-up heights on impermeable/permeable slope, a numerical wave tank by upgrading LES-WASS-3D was used in this study. Then, the model were compared with existing hydraulic model test for its verification. The numerical results well reproduced experimental results of solitary wave deformation, propagation and run-up height under various conditions. Also, the numerical simulation with a slope boundary condition has been carried out to understand solitary wave run-up on impermeable/permeable slope. It is shown that the run-up heights on permeable slope is 52.64-63.2% smaller than those on the impermeable slope because of wave energy dissipation inside the porous media. In addition, it is revealed that the numerical results with slope boundary condition agreed well with experimental results in comparison with the results by using stair type boundary condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.749-752
• /
• 2003

The HLA is defined by three components: (1) Rules, (2) the HLA Interface Specification, and (3) the Object Model Template(OMT). The RTI(Run-Time Infrastructure) software implements the interface specification. It provides services in a manner that is comparable to the way a distributed operating system provides services to applications. A way to test whether is suitable for a standard, and all service was implemented is tested through two phases of processes to verify the RTI which proposed in DMSO. In this paper, we discuss Level One Test Procedures and a method. Confirms whether RTI was implemented in Interface Specification according to Level One Test Procedures appropriately through a test. Develops Test Suite for every each step to test whether a correct command and the expected results are occur.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1066-1071
• /
• 2007

This case study refers to turbine-generator with retrofitted turbine rotor. Vibration problem occurring after the retrofit was mainly due to high vibration from exciter side. However, repeated test run and operation during scheduled maintenance caused high vibration from generator bearing, and post-overhaul test run before turbine vibration correction caused oil whip on the bearing. This case study shows how to analyze vibration condition of high turbine generator vibration detected during the post-overhaul test run and vibration condition of offline and online data to reflect it on establishing maintenance schedule and overhaul correction procedure. Vibration data could be acquired during steady load operation or even with varying speed and load. Each data is important for machinery condition evaluation. This case study shows that the vibration data during extreme condition is the key factor in analysis, which helps to find the machinery problem.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.238-246
• /
• 2008

This case study refers to turbine-generator with retrofitted turbine rotor. Vibration problem occurring after the retrofit was mainly due to high vibration from exciter side. However, repeated test run and operation during scheduled maintenance caused high vibration from generator bearing, and post-overhaul test run before turbine vibration correction caused oil whip on the bearing. This case study shows how to analyze vibration condition of high turbine generator vibration detected during the post-overhaul test run and vibration condition of offline and online data to reflect it on establishing maintenance schedule and overhaul correction procedure. Vibration data could be acquired during steady load operation or even with varying speed and load. Each data is important for machinery condition evaluation. This case study shows that the vibration data during extreme condition is the key factor in analysis, which helps to find the machinery problem.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.47-53
• /
• 2004

Waste aluminum dross is a major waste in the aluminum scrap smelters, and some metallic aluminum remains in the waste dross. In the previous study, waste aluminum dross was leached with sodium hydroxide solution to extract the remained aluminum into the solution, and aluminum hydroxide precipitate was recovered from the leached solution. A pilot plant was constructed and tested to demonstrate the developed technology. One thousand tons of waste aluminum dross could be processed, and about five hundred tons of aluminum hydroxide could be produced in the pilot plant. From the test run of the pilot plant, it was confirmed that the developed technology could be employed as a commercial scale and the produced aluminum hydroxide could be used for water treatment agent.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.2
• /
• pp.63-73
• /
• 2019

The paper aims to investigate relationships between technology and innovation management, total factor productivity and economic growth in China. By comparing the trends in total factor productivity growth of industrialized economies (i.e. OECD), this study intends to showcase the importance of total factor productivity progress in the Chinese economy. The study employs time series data of an annual basis for the period from 1977 to 2016 retrieved from the World Development Indicator. The study employs unit root test, cointegration test, fully modified least squares estimation method, canonical cointegrating regression and dynamic least squares estimation method to test the hypotheses. The results of the cointegrating regression analysis show that manufacturing growth leads to an increase of total factor productivity in the short-run in China. The findings of the study suggest that manufacturing (i.e. technology and product innovation) is positively related to the increase of total factor productivity in the short-run and total output growth in the long-run. The findings suggest that promoting technology and innovation management and supporting R&D subsidies may reduce the marginal cost of conducting R&D and increase the rate of technology and innovation management and R&D activity and therefore, the total factor productivity growth rate.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.2
• /
• pp.38-44
• /
• 2021

To cater to the transition from single-color to multicolor/multi-material printing, this paper proposes a cartridge-replacing type multi-nozzle Fused Depositon Modeling(FDM) three-dimensional (3D) printer. In the test printing run, tool change failure/wobble/layer shift occurred. It was confirmed that improper support was the cause of this tool change failure. As a solution, spline and electromagnetic cartridges were designed. Wobble was caused by machine vibration and the motor stepping out. To minimize wobble, an additional Z-axis was installed, and the four-point bed leveling method was used instead of the three-point bed leveling method. The occurrence of layer shift was ascribed to the eccentricity of the Z-axis lead screw. Therefore, slit coupler was replaced with an Oldham type. In addition to the mechanical supplementation, the control environment was integrated to prevent accidents and signal errors due to wire connections. Before the final test printing run, a rectifier circuit was added to the motor to secure precise control stability. The final test printing run confirmed that the wobble/layer shift phenomenon was minimized, and the maximum error between layers was reduced to 0.05.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.10
• /
• pp.29-38
• /
• 2022

Ready-made Garments (RMG) export earnings, which are almost 80% of the total exports of Bangladesh, have been recognized as one of the main catalysts for the recent development of the country. Therefore, the need to determine whether the RMG export had served as a mechanism for increasing the GDP growth as well as the economic development of the country is topical and pressing. We have applied the Johansen Co-integration test and Vector Error Correction Model (VECM) to reveal the linkage of RMG export earnings and other variables with the GDP growth rate in Bangladesh. Using data from 1990 to 2020 for Bangladesh, we have found long-run as well as short-run associations among RMG Export earnings, Foreign Direct Investment (FDI), and GDP growth. A co-integration among the variables is validated through the Johansen Co-integration test. Moreover, a causal correlation running from RMG export earnings to GDP was revealed by the Granger causality test in the long run. Finally, we estimated impulse response functions to observe the variations of model variables in response to a shock. Our result supports the proposition that RMG export earnings are one of the main growth engines in Bangladesh and this sector leads growth in other sectors also in the long term.