• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.131-138
• /
• 2013

PURPOSES : The intents of the study are to identify the accident factors and to demonstrate the potentials of tobit model as a tool to study the number of accidents on arterial roads segments. METHODS : This paper uses a tobit regression as a methodology to analyze the factors affecting the number of accidents. In pursuing the above goal, this study gives particular attentions to analyzing the data of 2,446 accidents (1,610 in major arterial roads and 836 in minor arterial roads) occurred on arterial roads in 2007 to 2010. RESULTS : First, 3 accident models which were classified by total arterial roads, major arterial roads and minor arterial roads, and were all statistically significant were developed. Second, the exclusive right-turn lane as common variable, and the number of accident, traffic volume, number of lanes, link length, rate of median, number of entrances, number of pedestrian crossings, number of curves, number of bus stops and exclusive left-turn as specific variables of the models were selected. Finally, the paired sample t-test could not be rejected the null hypotheses of three types of models. CONCLUSIONS : Using data from vehicle accidents on arterial roads, the estimation results show that many factors related to roadway geometrics and traffic characteristics significantly affect to the number of accidents.

• 한국ITS학회 논문지
• /
• 제21권1호
• /
• pp.123-140
• /
• 2022

지하도로의 운전자 주행행태는 지상도로와는 다르기 때문에 이를 반영한 도로설계가 필요하지만, 국내 도시지역 지하도로 설계지침은 대부분 지상도로의 설계기준을 준용하여 설계방법을 설명하고 있다. 본 연구에서는 주행 시뮬레이터를 활용하여 도심 지하도로 유출연결로 접속부의 운전자 주행행태를 분석하였다. 지하도로 및 지상도로 환경이 대조될 수 있는 시나리오를 설정하여 가상주행실험을 수행하였고, 세부 구간별로 주행행태 데이터의 비교·분석과 통계적 유의성을 검토하였다. 그 결과, 지하도로에서의 주행속도는 상대적으로 낮고 차로 횡적 이격거리는 인접한 터널 벽체로부터 멀어지려는 행태를 보였다. 이러한 결과를 바탕으로 지하도로 유출연결로 접속부에서 운전자의 주행안전성을 향상시킬 수 있는 설계방향과 시사점을 제시하였다.

• 한국농공학회논문집
• /
• 제57권2호
• /
• pp.47-56
• /
• 2015

At the present, the mechanized form roads pavement was constructed with plain concrete. Mostly, it was used by welded wire mesh for preventing crack. Cellulose fibers for the reinforcement of concrete offer relatively high levels of elastic modulus, fiber count (per unit weight), specific surface, and bond strength to cement-based materials. The construction of concrete pavement confirmed that cellulose fiber reinforced concrete was applicable to mechanized form roads pavement. In the study, cellulose fibers were used here at 0.08 % volume fraction, which is equivalent to a fiber content of $1.2kg/m^3$. Cellulose fiber reinforced concrete were compared with plain concrete. Field test results indicated that cellulose fiber reinforced concrete showed slightly to increase of 28 days compressive strength and improved the initial strength. it tended to increase of splitting tensile strength. Test results showed that the slump and air content tend to decreased. but, the variation of air contends is very little. Also, construction cost of cellulose fiber reinforced concrete is less than about 25.7 % the case of welded wire mesh previously used. Therefore, The cost reduction is expected to be possible in construction site by mechanized form roads pavement.

• 대한교통학회지
• /
• 제24권6호
• /
• pp.33-43
• /
• 2006

본 연구는 도로의 기능 및 통행특성. 차로수, 연평균일교통량 등을 고려하여 설계시간계수와의 관계를 살펴보고 적정 확률분포형 선정과 K값을 추정하였다 이를 위해 2005년도 상시 교통량 조사지점에서 수집된 교통자료를 이용하여 14개의 확률분포형을 적용하였다. 각 확률분포형은 최우도법을 이용하여 매개변수를 추정하였으며 각 분포형별로 매개변수 적합성 조건을 검토하였다. 적정 확률분포형의 결정은 chi-square검정을 통하여 대상 분포형의 기각유무를 판단하였으며. 그 결과에 대해 우선순위를 정하여 적정 확률분포형을 선정하였다. 그리고 각 유형별 AADT에 따른 적정 K계수를 추정하였다. 그 결과, 지방부 2차로 및 4차로. 도시부, 관광부도로의 적정 확률분포형은 각각 Pearson V, LogLogistic, LogLogistic, Extreme value 분포로 분석되었으며 적정 K계수는 각각 $0.1{\sim}0.2,\;0.09{\sim}0.14,\;0.07{\sim}0.13,\;0.1{\sim}0.2$로 추정되었다.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.362-368
• /
• 2017

The endurance test is important to evaluate and predict defects of the vehicles. In particular, in order to improve the reliability of the endurance test for the powertrain system of military vehicles, the driving load is measured and analyzed at test courses and maneuvering roads. As a result, new test courses for powertrain system is additionally needed to improve test reliability. In this paper, it shows that new test courses for powertrain system is designed and constructed using the measuring and anlayzing result between CPG test courses and army maneuvering roads.

• 한국자동차공학회논문집
• /
• 제6권1호
• /
• pp.73-79
• /
• 1998

For the design and development of the wheel type excavator, the dynamic effects of travelling on the performance of the equipment should be first analyzed and conside- red in the initial design stage. In order to test the durability of the equipment in a short period, th travelling test should be performed over accelerated durability test tracks. which is more severe than general field roads such as city road, paved road, unpaved road and rough road. In this paper, a parametric study is performed in order to determine important design parameters of durability test track of a wheel type excavator. A rigid body model is developed using DADS and dynamic analysis is performed for the equipment travelling over several test roads with different severity. A comparison of test and analysis results is also presented.

• 한국안전학회지
• /
• 제23권2호
• /
• pp.65-71
• /
• 2008

As the interest in traffic safety has been increasing recently, social movement is being made to reduce the number of traffic accidents and the view on improving the mobility of the existing roads is being converted into on establishing traffic safety as a priority. The increase of traffic accidents related to an intersection in a state that traffic accidents are decreasing overall may suggests the necessity to investigate the specific causes. In addition, we have to consider them when establishing the measures against traffic accidents in a intersection by investigating and analyzing the influences and factors that may affect traffic accidents. To induce the accident severity model, we collected the factors that affect accidents and then applied the Poisson Regression Model among nonlinear regression analysis by verifying the distribution of variables. As a result of the analysis, it turned out that the volume of traffic on main roads, the right turn ratio on sub-roads, the number of ways out on sub-roads, the number of exclusive roads for a left turn, the signals for a right turn on main roads, and an intersect angle were the factors that affect the accident severity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• 한국분무공학회지
• /
• 제23권4호
• /
• pp.234-243
• /
• 2018

Since September 2017, a small diesel vehicle certification test mode has been enhanced from NEDC to WLTC. The main reason for the change of the certification test mode is that the certification test mode of the emission control standard of the diesel vehicle does not sufficiently reflect various driving patterns of the actual roads. Several automakers have developed after-treatment systems such as LNT, SCR, and DPF to meet enhanced emissions regulations. In this study, four small diesel cars were selected for sale in Korea, and the exhaust gas measurement test was performed in the WLTC mode, which reflects the driving characteristics of the actual roads. As a result of test, LNT vehicle exceeded Euro 6 NOx regulation and SCR vehicle satisfied Euro 6 NOx regulation. In addition, both LNT and SCR systems showed high NOX emission characteristics due to speed, RPA and Vxa. For the PN, all test vehicles were fitted with a DPF and met the Euro 6 PN regulations, with similar PN emissions results in LNT and SCR system.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.204-208
• /
• 2006

This study is to develop a distributed urban flood runoff model that simulates the road runoff and to test the applicability of the model by applying to Pyeongtaek city of $12.2km^2$. To generate the runoff along the runoff, agree burned DEM (Digital Elevation Model) with road networks was suggested and the proper spatial resolution of DEM was identified finer than 15 m. To test the model applicability, 32 points on the road networks were selected and the hydrographs of each point were generated. The test showed reasonable results that increase the road runoff from the high elevation roads to the low elevation roads and the road runoff considering rainwater drainage from the road also showed reasonable results.