• Korean Journal of Environmental Agriculture
• /
• v.14 no.1
• /
• pp.82-87
• /
• 1995

The standardization of test procedures and reproducibility of the toxicity data are prerequisite for the toxicity testing with the earthworm culturing in the laboratory. No in-depth study on culturing conditions of earthworms has been conducted in Korea, even of massive cultural practice is common for composting and production of biochemicals. The earthworms, Lumbricus rubellus and Eisenia foetida, were cultured in three kinds of artificial soil substrates(I, II and III) based on the OECD Guideline, which consist of different ratios of components (sand, sphagnum peat and kaolinite), and fed with a mixture of grain powders. During the period of culturing, the body weight and reproduction parameters were measured. L. rubellus showed the best results for increasing body weight and cocoon production in the artificial soil substrate(I) compared with E. foetida. The cocoon production was significantly high in both species cultured in the artificial soil substrate(I) among the three kinds of soil substrates, but the cumulative cocoon production of L. rubellus was 11 cocoon per worm compared with 3.7 cocoons per worm of E.foetida. L. rubellus, therefore, was more prolific than E. foetida in these culture schemes. The cumulative mortality in both species was less than 10%, and the number of juvenile worms per cocoon ranged from 1.5 to 2.3 and thus did not show any relationships with soil substrates or species. From these data, the culture of L. rubellus in the laboratory could be standardized, but for E. foetida, further study would be necessary to establish the optimal growth conditions in the laboratory.

• Health Policy and Management
• /
• v.23 no.2
• /
• pp.152-161
• /
• 2013

Korea has a single National Health Insurance program and all citizens are covered under this program, accounting 97% of the population, approximately 50 million people. Claims submitted by Health care providers are reviewed by Health Insurance Review and Assessment (HIRA) for the reimbursement. HIRA database contains not only individual beneficiary's information, but also healthcare service information such as diagnosis, procedures, prescriptions and tests for them. HRA database has gained attention as importance source for research due to its rich healthcare information and the demand of HIRA database has increased. Due to its tremendous size, however, researchers have had problems in accessing the database to conduct research. To meet this demand, we conducted a study to develop the inpatient sample data from HIRA database for research. This study has two purposes: 1) to determine a needed sample size; 2) to test reliability and validity of the sample data. We determined an adequate sample size to ensure representativeness and generality with additional consideration for convenience of calculation. The minimum sample size was 729,904 for the generality, and 488,861 for representativeness. After considering the convenience of calculation, our final sample size was 13% of the population, which was about 7.7 million beneficiaries. Age (5 years interval) and gender were used as stratification variables for sampling. In order to examine whether this sample data appropriately reflect population, we tested the reliability and validity of the sample data. From the sample data, we computed average expenditure of total claims per inpatient for 2011, frequency of top 30 disease, estimation of the number of stroke patients from the sample data, and then compared them to those from the population. Results confirmed reliability and validity of the sample data.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.7-16
• /
• 2005

Rejected Takeoff Accidents are not common. but if occurred, it leads to big disaster From the year of 1959, when Jet Transport service opened, to the year of 2000, Rejected Takeoff accidents/incidents occurred total of 94 cases. All cases led to overrun, and major cause is to initiate stopping maneuvers over $V_1$, takeoff decision speed, according to National Transport Safety Board of America. Similar results are represented in Aviation Safety Reporting System of National Aeronautics and Space Administration. So I believe that it is worth studying if Airplane Flight Manual, which is the reference Performance criteria, is appropriate to operations of line pilots. The definition of $V_1$ has been revised a couple of times and Rejected Takeoff Certification Standards for Transport Airplanes was changed in 1998. It shows that up to now there are some portions unreasonable. This study focused on gathering the pilot's tendency for current Rejected Takeoff Procedures of K airlines and analyze the factors they concern. I chose B777 airplane and actually measured the recognition and reaction time of the rejected takeoff transitions through Simulators. And compared the results with the data of flight test and Airplane Flight Manual.

• Journal of Chest Surgery
• /
• v.9 no.2
• /
• pp.239-244
• /
• 1976

Alterations in the serum magnesium level were studied in twenty patients who had open-heart surgery during the period from August 1974 to May 1975. The patients were chosen at random. The operative procedures included repair for congenital heart diseases in fifteen patients and cardiac valve replacement for acquired valvular heart diseases in five patients. The age ranged from 8 to 46 years, with an average of 19 years. None of the patients had a history of gross neuromuscular abnormalities. Cardiopulmonary bypass was carried out using a roller pump and a disposable oxygenator. The prime solution consisted of 2 units of ACD banked blood and approximately an equal volume of non-blood additives in adults, while a relatively smaller volume was added in children. The average flow rate was 2,733 ml per minute. Blood samples for magnesium and arterial blood pH were obtained the day after admission 25 minutes after initiation of the bypass and on the morning the day after operation. Preoperative data were then compared with those obtained during the bypass and postoperatively by a paired test. During the bypass, the serum magnesium level decreased significantly from $1.425{\pm}0.029$ to $1.210{\pm}0.063mEq.$ liter (p<0.001). Also, there was a significant decrease in serum magnesium from $1.425{\pm}0.029$ preoperatively to $1.255{\pm}0.083mEq$. per liter (p<0.001). Also, there was a significant decrease in serum magnesium from $1.425{\pm}0.029$ preoperatively to $1.255{\pm}0.083mEq$. per liter postoperatively (p<0.01). The duration of bypass was less than 90 minutes in 10 patients (group A) and exceeded 90 minutes in the remaining 10 (group B). There was no statistical correlation between the groups A and B ($p{\gg}0.20$). Statistical analyses of the serum magnesium level and arterial blood pH showed no significant correlation with correlation coefficient; being -0.3485(pre-op), -0.2971(during bypass), and -0.1008(post-op), respectively. In all the patients, no gross neuromuscular abnormalities were found postoperatively. At present, the clinical significance of the serum magnesium level during and after bypass is controversial. In the near future, however, it is expected that improvements in prime solution and heart-lung machine will solve this problem.

• International Journal of Highway Engineering
• /
• v.8 no.1 s.27
• /
• pp.131-138
• /
• 2006

Methods of back calculation for either design procedures or elastic moduli obtained from FWD(Falling Weight Deflectometer) tests have widely been used to predict remaining life of airfield concrete pavements. Since the variation of the elastic modulus obtained from the FWD test depends on the back calculation methods, prediction of remaining life of airfield pavement using the back calculation method has not been reliable. In addition, the FWD method only concentrates on the structural integrity of the pavement without considering functional distress. In this study, a newly developed remaining life estimation procedure is proposed. This methodology includes both structural and functional consideration and suggests models and decision criteria for each stage. In order to improve the estimation procedure on remaining life of pavement, conducted the several tests on an old airfield concrete pavement. As a result, it is concluded that the load transfer efficiency on joint is better for predicting remaining life of pavement than the elastic modulus, which is commonly used. In order to verify applicability of the newly developed estimation procedure and detailed models, investigation and analysis were conducted according to the new methodology on C-airfield pavement. Finally, it is confirmed that the efficiency of the proposed method for practical application was good enough.

• Journal of Food Hygiene and Safety
• /
• v.16 no.3
• /
• pp.194-199
• /
• 2001

This study was designed to compare the effectiveness and applicability of the HApS$^{TM}$ (Hazard Analysis process System; HUKO, Seoul, Korea) based on Petrifilm$^{TM}$ (3M, St. Paul, MN, USA) with the AOAC (the Association of Official Analytical Chemists) standard total aerobic count (TAC) method and coliform count (CC) method for meat products. The comparisons were carried out using 230 meat samples collected from various retailers: 80 pork samples, 80 chicken samples, and 70 beef samples. In the comparison of the correlation coefficient (r) between conventional method and HApS$^{TM}$ method by a linear regression analysis, the correlation coefficients in total microorganism were 0.97767, 0.90712, and 0.95594 in pork, beef, and chicken samples, respectively. The correlation coefficients in coliform count were 0.82062, 0.94833, and 0.96839 in pork, beef and chicken samples, respectively. All the independent t-test on measurement values between conventional method and HApS$^{TM}$ method represented no significant differences in the means between two methods at the 0.05 of significance level($\alpha$=0.05). Based on the high correlation between HApS$^{TM}$ and the AOAC standard methods in the TAC and CC, it might be compatible to employ the HApS$^{TM}$ method to measure the microbial contamination in livestock products. HApS$^{TM}$ method was simpler and less time-consuming in sample preparation and procedures faster than the conventional method. These results suggested that the HApS$^{TM}$ method could be substitute for the conventional methods in the analysis of microbial contamination measurement in meat products.n meat products.

• Journal of Gifted/Talented Education
• /
• v.16 no.2
• /
• pp.167-191
• /
• 2006

The purpose of this study was to explore logical thinking abilities and metacognitive characteristics by student's giftedness and grade level. Furthermore, this study sought to present the practical basis for the promotion of students' abilities in self-driven learning as well as cognition. Average-ability students(n=199), economically disadvantage gifted students(n=133), and gifted students(n=111), who were sampled by two-step sampling procedures, responded the logical thinking ability test(Cho et al, 2006) and the questionnaire asking self-perception for 'metacognitive knowledge' and 'metacognitive control' abilities(Cho & Han, 2004). As the results, average-ability students showed less logical thinking abilities(in language, mathematics, and space) than gifted students. The logical thinking abilities had affected by giftedness, grade level and these interaction. And gifted students showed higher metacognitive control abilities in planning, monitoring, priority, and strategies of learning than average-ability students. However, there were no significant differences in metacognitive knowledge and metacognitive control abilities between economically disadvantaged gifted students and gifted students.

• Journal of Environmental Health Sciences
• /
• v.37 no.6
• /
• pp.440-449
• /
• 2011

Objectives: This study was designed to determine the levels of polybrominated diphenyl ethers (PBDEs) in breast milk and to evaluate the relations with factors affecting these levels. Methods: The congener levels of PBDE in 22 samples of breast milk were analyzed using a high resolution gas chromatograph with a high resolution mass detector. In accordance with our standard operating procedures, the recoveries of internal standards had to range between 68% and 118%. Since the distribution of PBDE concentrations is close to log-normal, the data were logarithmically transformed before analysis. Test subjects were healthy primipara and multipara mothers with a mean age of 32 (SD = 2.7) in 2006. Results: Seven PBDE congeners (BDE-28, 47, 99, 100, 153, 154, and 183) were detected and identified in all of the pooled breast milk samples, indicating widespread contamination from PBDEs in the environment in Korea. Residue levels of total PBDEs (sum PBDEs from tri- to hepta-BDE) ranged from 0.84-13.1 ng/g lipid with median and geometric mean levels of 2.6 ng/g lipid and 2.74 ng/g lipid, respectively. PBDE congeners 47, 99 and 153 markedly predominated and accounted for about 75% of the amount of the PBDE congeners analyzed. BDE-47 was the dominant congener in most samples, whereas BDE-153 was predominant in a few (n = 7/22). BDE-47 was highly correlated with total PBDEs (r = 0.987, p < 0.01). In analyses of the differences of the means of log transformed breast milk PBDE levels for groups of potential covariates, only breast milk BDE-47 and BDE-99 levels were significantly associated with fish (p < 0.05) and meat consumption (p < 0.01). However, we did not find significant correlations between PBDE levels and maternal age, body mass index (BMI), parity, job presence and smoking status. Conclusions: Our findings are mainly limited due to the small sampling size and low doses of PBDEs exposure. Background and human exposure data of PBDEs is lacking, and longitudinal investigations into the environment and biota are encouraged to determine the health impact on future populations in Korea.

• Journal of KIISE:Software and Applications
• /
• v.29 no.12
• /
• pp.883-894
• /
• 2002

Classical deterministic testing controls the execution of concurrent programs based on the equivalence between specifications and programs. However, it is not directly applicable to a situation in which synchronization sequences, being valid but infeasible, are taken into account. To resolve this problem, we had proposed automata-based deterministic testing in our previous works, where a concurrent program is executed according to one of the sequences accepted by the automaton recognizing all sequences semantically equivalent to a given sequence. In this paper, we present the automata-based testing environment for Java multi-thread programs, and we design and implement "Deterministic Executor" in the testing environment. "Deterministic Executor" transforms a Java multi-thread program by applying automata-based deterministic testing, the transformed program presents testing results. "Deterministic Executor" uses "Automata Generator", which generates an equivalent automaton of a test sequence, and "Replay Controller", which controls the execution of programs according to the sequence accepted by the automaton. By illustrating automata-based testing procedures with a gas station example, we show how the proposed approach does works in a Java multi-threaded program.roach does works in a Java multi-threaded program.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.175-185
• /
• 2014

This study is to develop a fatigue scale for the private security guard for a private security guard to effectively manage fatigue were tested for validity and reliability. To achieve that, this study employed purposive sampling to draw 300 samples among private security guards working for the security firms registered in Seoul District Police Office as of 2014, and used 259 samples for final analysis. Fatigue scale was developed on the basis of the scale development methods and procedures in previous studies. For data processing, SPSSWIN 18.0 program was applied to conduct exploratory factor analysis, reliability analysis, and correlation analysis, and AMOS 18.0 program was employed to conduct confirmatory factory analysis. This study came to the following conclusion. First, the validity of the fatigue measurement tool was high. In other words, content validity was high, and construct validity was also high. The factor loading of exploratory factor analysis was .452, and the standard value of confirmatory factor analysis was .403. Therefore, the tool satisfied the basis value of fit index. The sub categories of fatigue, finally drawn from validity test, were mental fatigue, nervous system dysfunction, physical deformity, and exhaustion. Secondly, the reliability of the fatigue measurement tool was high. In other words, according to item analysis, the correlation between items and their sub categories, and between items and total score was more than .602, relatively high. And the reliability coefficient (Cronbach's ${\alpha}$) was high, or more than .658. Fatigue Scale tool will be developed by private security guards in the present study is to measure the validity and reliability verification is clearly tired of the private security guards than the tools that are used in other studies in the existing area.