• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.93-99
• /
• 2012

PURPOSES: The purpose of this study is to compare the alkali-silica reactivity for mortar bar and concrete prism specimens using crushed aggregates of 5 types in Korea. And the alkali-silica reactivity for those aggregates are measured by chemical test method. METHODS: The alkali-silica reactivity for those aggregates was measured by chemical test method of KS F 2545, mortar-bar test of KS F 2546, accelerated mortar-bar test method of ASTM C 1260 and concrete prism test method of ASTM C 1293, relatively. RESULTS: The alkali-silica reactivity for those aggregates was verified by chemical test of KS F 2546 and accelerated mortar-bar test of ASTM C 1260. However, it was not by mortar-bar test of KS F 2546 and concrete prism test of ASTM C 1293. CONCLUSIONS: The above results showed that relationship among the four test methods were very low. The results from 3 types of test methods using cement-aggregate combinations appeared to be different. Because the environmental conditions of test methods for measuring the alkali-silica reactivity such as equivalent alkali content(external source), humidity, temperature, and times were different though the aggregates were same. Moreover, alkali-silica reactivity showed the biggest impact when alkalis were supplied form outside and exposed to environmental conditions. The accelerated mortar-bar test method seems to be most appropriate test method for concrete structures exposed to alkali environment.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.

• 한국해양학회지:바다
• /
• 제13권2호
• /
• pp.106-111
• /
• 2008

해양생태독성평가를 위한 공정시험방법으로서 해양생태계의 분해자, 기초생산자 및 소비자를 대표하는 6개 생물군을 이용하여 각각의 생물에 대한 생태독성시험용 표준시험방법(standard methods)을 개발 또는 정립하였다. 본 시험방법은 미환경보호국, 국제기구 및 유럽국가의 표준시험방법을 참고하였으며, 독성시험에 사용되는 표준시험생물은 우리나라에 서식하는 해양성 또는 광염성 생물(euryhaline species)로 선정하였다. 각 시험방법은 표준시험생물의 배양 및 사육, 시험방법 및 과정, 시험의 재현성 및 적합도 기준 등을 포함한다. 표준시험생물은 총 9종으로서 해산발광박테리아(Vibrio fischeri), 해산규조류(Skeletonema costatum), 녹조구멍갈파래(Ulva pertusa), 해산윤충류(Brachionus plicatilis), 저서요각류(Tigriopus japonicus), 저서단각류 2종(Mandibulophoxus mai and Monocorophium acherusicum) 및 어류 2종(Oryzias latipes and Paralichthys olivaceus)을 포함한다. 표준시험생물은 해양생태계의 기초생산자, 분해자 및 소비자를 대표하며, 생태독성 시험시 각 영양 단계별 최소 1종을 포함하는 총 3종의 "battery test"를 권장한다.

• 한국환경보건학회지
• /
• 제48권5호
• /
• pp.266-271
• /
• 2022

Background: The selection of distributions of input parameters is an important component in probabilistic exposure assessment. Goodness-of-fit (GOF) methods are used to determine the distribution of exposure factors. However, there are no clear guidelines for choosing an appropriate GOF method. Objectives: The outcomes of probabilistic consumer exposure assessment were compared by using five different GOF methods for the selection of input distributions: chi-squared test, Kolmogorov-Smirnov test (K-S), Anderson-Darling test (A-D), Akaike information criterion (AIC) and Bayesian information criterion (BIC). Methods: Individual exposures were estimated based on product usage factor combinations from 10,000 respondents. The distribution of individual exposure was considered as the true value of population exposures. Results: Among the five GOF methods, probabilistic exposure distributions using the A-D and K-S methods were similar to individual exposure estimations. Comparing the 95th percentiles of the probabilistic distributions and the individual estimations for 10 CPs, there were 0.73 to 1.92 times differences for the A-D method, and 0.73 to 1.60 times differences (excluding tire-shine spray) for the K-S method. Conclusions: There were significant differences in exposure assessment results among the selection of the GOF methods. Therefore, the GOF methods for probabilistic consumer exposure assessment should be carefully selected.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.956-960
• /
• 2002

Offices and other multipurpose buildings commonly have suspended ceilings installed over room dividing wall. But Korean Standards don't include any code on test methods and test facility of the suspended ceiling system. Therefore, test methods and test facility from ISO and ASTM have been used for evaluating sound performance in domestic so fu. In this study, Korean Standards draft on test methods and test facility of suspended ceiling system and materials is proposed on the basis of ISO and ASTM.

• 응용통계연구
• /
• 제13권2호
• /
• pp.515-523
• /
• 2000

본 논문에서는 변화점 문제(change-point problem)에 대한 통계적 방법들을 사용하여 에지를 검출하고자 한다. 이를 위해 $n\timesn$ 부분영상을 선택하고 선택된 영상이 농도값에서 유의한 차이가 있는 두 개의 영역으로 분할하는 경계에 대응되는 에지점(edge point)을 포함하는지에 대해 가설 검정을 한다. 에지 검출에 사용되는 통계적 방법은 이표본 Kolmogorov-Smirnov 검정에 기초해서 얻은 제안된 방법과 기존의 우도비(likelihood ratio)방법,비모수적인 Wolfe-Schechtman 방법 등이다. 위 방법들의 성능을 평가하기 위해 접음영상과 잡음없는 영상에 대해 실험을 실시하고 비교 분석한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1126-1131
• /
• 2002

Offices and other multipurpose buildings commonly have suspended ceilings installed over room dividing wall. But Korean Standards don't include any code on test methods and test facility of the suspended ceiling system. Therefore, test methods and test facility from ISO or ASTM have been used for evaluating sound performance in domestic so far. In this study, every regulation from ISO, ASTM, especially for airborne sound insulation against suspended ceiling system, is analyzed in order to apply to establishment of Korean Standards on test methods and test facility of suspended ceiling system and materials.

• 한국산업정보학회논문지
• /
• 제25권4호
• /
• pp.17-27
• /
• 2020

본 논문에서는 무기체계 양산에 활용되는 자동시험장비 (Automatic Test Equipment: ATE)의 유효성 입증을 위한 검증 방안을 제안하였다. 검증되지 않은 시험장비의 시험 데이터는 신뢰성이 미흡하여 객관적인 자료로써 활용이 제한되므로 ATE를 활용한 시험대상품의 품질 수준을 확보하기 위해서 시험장비의 검증이 필수적이다. 제시된 방법을 통해 전술정보통신체계 ATE에 적용하여 검증 결과를 확인하고 유효성 입증 결과를 기술한다.

• Journal of Information Processing Systems
• /
• 제13권6호
• /
• pp.1487-1495
• /
• 2017

With increasing interests in renewables, more consumers are installing an energy storage system (ESS) in their backyards, and thus, the ESS will play a critical role in the emerging smart grid. Due to mechanical properties, however its operational dynamics must be well understood before connecting the ESS to the smart grid (and eventually to an IT system). To this end, we investigate charging and discharging processes in detail. This paper, then, proposes methods for four type tests (state of charge test, conversion efficiency test, response time test, and ramp rate test) that can assess the dynamics of the ESS. The proposed methods can capture accurate delay values of mechanical processes in the ESS, and it is expected for those values to help design real-time communication systems in the smart grid involving the ESS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1121-1124
• /
• 2004

Aging test to estimate life property of polymer insulator is executed through several international standard such as IEC 61109 and CEA tracking wheel test, but is not getting clear conclusion yet. There are two methods in the diagnosis method of polymer insulator such as off-line and on-line. The diagnosis methods in off-line are external condition analysis by the eye, contaminant analysis on surface, surface analysis, pollution withstand voltage test, power frequency flashover voltage test, lightning impulse flashover test, tensile fracture load test and flexural load test. The diagnosis methods in off-line most are the method for virgin and last aged sample. However, the diagnosis method in on-line is method that can be evaluate sample state as progressing continuously aging test in beginning, The diagnosis method in on-line is arranged as following: leakage current measurement, electric field, surface state investigation, thermal image, emitting light measurement and then so. In this paper, the tracking performance of polymer insulator with salt solution which is added surface active agent. The diagnosis of insulator sample has been analyzed by leakage current and visual examination.