• 약학회지
• /
• 제43권5호
• /
• pp.606-613
• /
• 1999

To survey the possibility of replacing the pyrogen test with Limulus Amebocyte Lysate(LAL) test and to find out a standard methods suitable to our blood products made in Korea, 100 samples of 20% human serum albumin were tested by commercial LAL test kits and results of those were compared with rabbit pyrogen test. The LAL test is used both dinetic-chromogenically and kinetic-turbidimetrically. Both methods equally showed broad detection range (5.0~0.005 EU/ml), excellent sensitivity ($\geq$ 0.005 EU/ml) and predominant recovery rate within valid dilution range, but kinetic-turbidimetric method seemed to be more reproducible than kinetic-chromogenic method(kinetic-chromogenic method : S.D. = 15.88, kinetic-turbidimetric method : S.D. = 8.12). After heating the sample at 75$^{\circ}C$ for 15 min, the results showed a little elevated recovery rate with both methods. After performing the test on 100 albumin samples with both kits, the results were analysed using the USP standard (1.33 EU/ml). 7% of samples in kinetic-chromogenic methods and 1% of samples in kinetic-turbidimetric method exceeded the limit of endotoxin levels regulated for blood products in USA. Because this phenomenon was not observed in both methods at the same time and both methods have high sensitivity ($\geq$0.005 EU/ml), these results seemed to depend on nonspecific reaction. Considering its sensitivity and reproducibility, we could assure that LAL test is proper to detecting pyrogenic with good sensitivity.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.167-175
• /
• 2007

정밀한 구조물의 상태진단 혹은 안전성 평가는 비파괴 시험의 정밀성(Accuracy), 변이성(Variability) 등과 같은 여러 가지 요소에 의하여 좌우된다. 특히 비파괴 시험을 이용한 측정값과 구조물의 상태에 있어서의 불확실성(Uncertainty)은 정밀한 상태진단에 큰 영향을 미친다. 비파괴 시험을 활용함에 있어서의(간접조사) 신뢰할만한 비파괴 장비라면 현 구조물의 상태(피해면적)를 정확하게 나타낼 수 있어야 한다. 본 논문은 현재 사용이 증가되고 있는 비파괴 장비의 올바른 선택과 정확한 구조물의 안전 진단을 위하여, 비파괴장비의 성능 평가에 있어 확률적 기초를 제공한다.

• Communications for Statistical Applications and Methods
• /
• 제7권2호
• /
• pp.447-456
• /
• 2000

In this paper, we considered three methods for outlier identification sample surveys. First, we studied method of handling and adjusting outliers in normal population. Second, we studied existing methods using mean, maximum and minimum and proposed a test using of median which well reflects characteristic of data regardless of sampling distribution. Finally, we showed our test using median works better than Dixon and mean test through simulation.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권1호
• /
• pp.7-14
• /
• 2016

Purpose: The purpose of this study is to development the fire evaluating test methods for the Electric hair dryers. Methods: We was designed FMEA (Failure mode and effects analysis) in order to analyze the fire mechanism on the electric hair dryers and designed evaluating test methods (Durability tests on the environment, Mechanical durability tests) obtained through the two-step QFD (Quality Function Depolyment) and tested. Conclusion: We verified the evaluating fire test methods on the electric hair dryers through the analysis of the test results and some reproduction test.

• Corrosion Science and Technology
• /
• 제16권3호
• /
• pp.141-150
• /
• 2017

Impregnating with quality silicone water repellent on the concrete surface is an effective method of protecting concrete. Quality silicone water repellent has been widely used in the engineering profession because of its desirable properties such as hydrophobicity, keeping concrete breathable and preserving the original appearance of the concrete. The companies in China that produce silicone water repellent are listed. Test methods in the specifications or standards about silicone water repellent in China are summed. The test methods relative to durability of concrete impregnated with silicone water repellent (such as resistant to chloride ion penetration, resistant to alkali, resistance to freezing and thawing and weatherability etc.) and the constructive quality (such as water absorption rate, impregnating depth and the dry velocity coefficient etc.) are compared and analyzed. The results indicate that there are differences among test methods relative to different specifications with the same index and therefore, confusion has ensued when selecting test methods. All test methods with the exception of the method of water absorption rate by using a Karsten flask are not non-destructive methods or conducted in a laboratory. Finally, further research on silicone water repellent during application is proposed.

• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.567-574
• /
• 2003

The estimation problem of predictive value of a positive test(PVP), which is assessing the accuracy of a screening test is considered. Score methods discussed by Gart and Nam(1988) are proposed for constructing confidence interval for PVP. The simulation studies are conducted in evaluating the proposed methods and existing approximate ones.

• 정보통신설비학회논문지
• /
• 제8권3호
• /
• pp.144-151
• /
• 2009

In this paper, we consider various international and local standards and applied ontology concepts which are used in Semantic Web, to make more structured test methods/procedure. Based on the ontology concept, we classify test method as three categories (i.e., conformance test, interoperability test and performance test), and make test structures for each category. We believe that this research provides test methods which reflect various standards as well as the guidelines for users to construct RFID device software more structurally.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.391-398
• /
• 2000

The index properties of cohesive soils play an important role to examine entire tendency of soil properties. Especially, the Atterberg limits have a good correlation with compression and shear strength of cohesive soils. However, these values strongly depend on their testing methods. In this study, for Pusan clays the Atterberg limits were peformed under different conditions; for example, four kinds of specimen preparation, two kinds of testing equipment, and four kinds of estimating method. And a laboratory vane test was peformed to compare the undrained shear strength with that of the fall cone test. As experimental results, the value of liquid limit performed for oven-dried sample, followed in ASTM D4318, underestimated by about 10% compared to those of another three methods, irrespective to the used equipments. But the value of plastic limit was not influenced by sample preparation methods and equipments. The liquid limits by one-point methods(Leroueil et al., 1996; Nagaraj et al., 1981) were agreed well with those of different methods. Finally, the undrained shear strength by laboratory vane test was relatively larger than that of fall cone test, and the relationship between both showed a bad trend.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권4호
• /
• pp.35-47
• /
• 2020

Step-drawdown test is one of the widely-used aquifer test methods to evaluate aquifer and well losses. Various approaches have been suggested to estimate well losses using the step-drawdown test data but the uncertainties associated with data interpretation and analysis still exist. In this study, we applied three different step-drawdown test analysis methods -Jacob (1947), Labadie and Helweg (1975), Gupta (1989)- to the step-drawdown test data in Seobu-myeon, Hongseong-gun, South Korea and estimated aquifer and well losses. Comparisons of different step-drawdown test analysis methods revealed that the estimated well losses showed different values depending on the applied methods and these variations are likely to be related to the limitation of the assumptions for each analysis method. Based on the detailed analysis of time-drawdown data, we performed step-drawdown test analysis after removing outlier data during the initial stage of step drawdown test. The results showed that the application of the revised time-drawdown data could substantially decrease the error of the analysis as well as the variations in the estimated well losses from different analysis methods.

• 턱관절균형의학회지
• /
• 제3권1호
• /
• pp.27-30
• /
• 2013

Diagnostic evaluation methods frequently adopted in Temporomandibular Balancing Medicine (TBM) are briefly reviewed as to their basic concepts and procedures. TBM diagnostic evaluation methods may be classified into direct and indirect ones. Indirect methods are to observe any change in the manifestations with regard to the (1) posture, (2) pain, (3) muscle strength, and (4) stretching. Direct methods are to evaluate through (1) cervical palpation test, (2) restricted cervical rotation test, and (3) lateral cervical tension test. These methods may provide clinicians valuable information on the current yinyang balance and potential therapeutic factors in relation with the temporomandibular joint, a meridian system, and the whole body.