• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.250-257
• /
• 2002

A centrifugal compressor for HFC-l34a has been newly designed and developed. Flow analysis using commertial programs was used to evaluate performance and internal flow of the impeller, inlet guide vane and diffuser etc. and design software was developed. The compressor for HFC-l34a was also investigated experimentally to check compression performance. The calculated data coincide the test results of compressor. The data obtained in the present study are useful for design of HFC-l34a centrifugal compressors.

• 소성∙가공
• /
• 제22권6호
• /
• pp.303-309
• /
• 2013

Spring-back of MS1470 steel sheets was numerically predicted using a non-linear kinematic hardening material behavior based on the Yoshida-Uemori model. From uniaxial tension and uniaxial tension-compression-tension data as well as the uniaxial tension-unloading-tension data, the parameters of the Yoshida-Uemori model were obtained. For the numerical simulations, the Yoshida-Uemori model was implemented into the commercial finite element program, ABAQUS/Explicit and ABAQUS/Standard using the user-defined material subroutines. The model performance was validated against the measured spring-back from the benchmark problems of NUMISHEET 2008 and NUMISHEET 2011, the 2-D draw bending test and the S-rail forming test, respectively.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.291-298
• /
• 2019

In order to study the mechanical properties of rock salt, triaxial compression tests under different temperatures and confining pressure are carried out on rock salt specimens, the influence of temperature and confining pressure on the mechanical properties of rock salt was studied. The results show that the temperature has a deteriorative effect on the mechanical properties of rock salt. With the increase of temperature, the peak stress of rock salt decreases visibly; the plastic deformation characteristics become much obvious; the internal friction angle increases; while the cohesion strength decreases. With the increase of confining pressure, the peak stress and peak strain of rock salt will increase under the same temperature. Based on the test data, the Duncan-Chang constitutive model was modified, and the modified Duncan-Chang rock salt constitutive model considering the effect of temperature and confining pressure was established. The stress-strain curve calculated by the modified model was compared with the stress-strain curve obtained from the test. The close match between the test results and the model prediction suggests that the modified Duncan-Chang constitutive model is accurate in describing the behavior of rock slat under different confining pressure and temperature conditions.

• 설비공학논문집
• /
• 제22권3호
• /
• pp.139-148
• /
• 2010

A centrifugal compressor for HFC-134a has been newly designed and developed. Flow analysis using commercial programs was used to evaluate performance and internal flow of the impeller, inlet guide vane and diffuser etc. The purpose of this study is to establish the design theory necessary to the development of HFC-134a centrifugal compressors and to supply basic data related to design by reviewing design values and experimental values through the performance test. The compressor for HFC-134a was also investigated experimentally to check compression performance. The calculated data coincide the test results of compressor. The data obtained in the present study are useful for design of HFC-134a centrifugal compressors.

• 한국지반공학회논문집
• /
• 제28권12호
• /
• pp.17-25
• /
• 2012

유한요소해석 등에 의한 수치해석에서는 정식화된 응력-변형률 관계가 필요하다. 그러나 현재까지 여러 연구자들에 의해 발표된 응력-변형률 관계의 정식화는 미소변형률 수준에서부터 피크에 이르기까지 전체를 모두 만족하지 못하게 표현하였다. Tatsuoka and Shibuya(1991)는 하나의 식으로 연약 점성토에서 연암에 이르는 광범위한 지반재료에 대해 적용 가능하며, 넓은 범위의 변형률 수준($10^{-6}{\sim}10^{-2}$)에 대해 적용할 수 있는 새로운 제안식을 발표하였다. 본 연구는 세계 각국의 주요 연구기관에서 사용되고 있는 7종류의 연구용 표준사 공시체 및 2종류의 유리 구슬(Glass beads) 공시체를 이용하여 평면변형률압축시험을 실시하였다. 최대주응력방향(${\sigma}_1$)의 변형률과 최소주응력방향(${\sigma}_3$)의 변형률을 각각 $10^{-6}$에서 $10^{-2}$까지 상세히 측정하였고, 얻어진 시험 결과를 새롭게 제안된 식에 적용하였다. 그 결과 미소변형률 수준에서 피크에 이르는 응력-변형률 관계의 실측된 데이터와 매우 잘 일치하는 결과를 얻었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.46-50
• /
• 2005

Smart skin, a multi-layer structure of composed of a round shape antenna, was designed and fabricated. Tests and analyses was conducted to study its behavior under compressive loads. It was confirmed that the designed smart skin failed due to premature buckling before compression failure. Numerical prediction of structural behavior of smart skin by MSC.NASTRAN agreed well with experimental data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.591-596
• /
• 1999

Current design methods as well as the majority of the previous researches for shear strength of the reinforced concrete are based on empirical method. There is a need to propose the rational models based on analytical approach. This paper presents the modified strut-and-tie model for reinforced concrete columns, under axial compression, shear, and flexural moment, considering tensile strength of concrete. Using this model, the strength and the failure mode of R/C columns are investigated, and the proposed models are compared with test data available in the literature.

• ETRI Journal
• /
• 제6권1호
• /
• pp.10-14
• /
• 1984

A method for image data compression, Called condtional replenishment, using the interframe correlation of image signal hasbeen studied. In this study, only those picture elements between successive frames are transmitted instead of every picture element in each, frame. A real time test simulator that can demonstrate the functions of conditional replenishment coder with condition of noiseless channel has been realized, and the result shows that the transmitting pixels can be compressed to the 25% of original signal retaining good picture quality.

• Computers and Concrete
• /
• 제18권1호
• /
• pp.39-51
• /
• 2016

This paper considers the tensile strength of concrete samples in direct, CTT, modified tension, splitting and ring tests using both of the experimental tests and numerical simulation (particle flow code 2D). It determined that which one of indirect tensile strength is close to direct tensile strength. Initially calibration of PFC was undertaken with respect to the data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, validation of the simulated models in four introduced tests was also cross checked with the results from experimental tests. By using numerical testing, the failure process was visually observed and failure patterns were watched to be reasonable in accordance with experimental results. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Tensile strength of concrete in direct test was less than other tests results. Tensile strength resulted from modified tension test was close to direct test results. So modified tension test can be a proper test for determination of tensile strength of concrete in absence of direct test. Other advantages shown by modified tension tests are: (1) sample preparation is easy and (2) the use of a simple conventional compression press controlled by displacement compared with complicate device in other tests.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1396-1403
• /
• 2009

The Ministry of Construction and Transportation (MOCT) has been constructing a nationwide soil information DB since 2000, as basic data for the construction of 'underground geographical information,' a project under the 2nd National Geo-spatial Information System (NGIS) master plan. The inputted soil information includes not only underground conditions such as the layer depth, type, color, and groundwater level, but also engineering information that can be applied to construction work design, such as on the standard penetration test and the compression test. It is difficult to use this information in soil analysis and design, however, because only the test results are currently available. A web-based geo-spatial information system was developed in this study to facilitate the effective application of the soil information database (DB). First, the space information, layer information, and engineering test information were loaded from the soil information DB in real time, and the earth volume, bearing capacity, and settlement were calculated to develop a web client that will evaluate the ground softness and liquefaction. It seems that the soil information DB can be actively applied to the planning and design of construction works using this system.