• Journal of Life Science
• /
• v.20 no.6
• /
• pp.870-876
• /
• 2010

The purpose of this study was to examine the effect of kinesio taping on muscle strength and changes of muscle fatigue and damage. 10 male subjects participated in 1-RM and isometric cybex muscle strength tests with and without taping application. Muscle strength (bench press, leg press) and extension (knee, shoulder) strength were significantly increased after taping, but there was no significant difference in flexion (knee, shoulder) strength. The concentration of fatigue factors (ammonia, phosphorous), muscle damage index substances (CK, LDH), IGF-I and creatinine were reduced after taping, but there were no significant differences.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.645-653
• /
• 2013

Seoul National University flap(SNUF) blade is a small-scale rotor blade incorporating a small trailing-edge flap control surface driven by piezoelectric actuators at higher harmonics for vibration attenuation. Initially, the blade was designed using two-dimensional cross-section analysis and geometrically exact one-dimensional beam analysis, and its material configuration was finalized. A flap-deflection angle of ${\pm}4^{\circ}$ was established as the criterion for enhanced vibration reduction based on an earlier simulation. The flap-linkage mechanism was designed and static bench tests were conducted for verifying the performance of the flap-actuation mechanism. Different versions of test beds were developed and tested with the designed flap and the selected APA 200M piezoelectric actuators. Through significant improvements, a maximum deflection of ${\pm}3.7^{\circ}$ was achieved. High-frequency experiments were conducted for evaluating the performance, and the transfer function of the test bed was determined experimentally. With the static tests almost complete, the rotor power required for testing the blade in a whirl tower (centrifugal environment) was calculated, and further preparations are underway.

• Journal of Environmental Impact Assessment
• /
• v.31 no.1
• /
• pp.75-81
• /
• 2022

The purpose of this study is to propose the angle-limit of the escape ramp by analyzing the frog behavior characteristics according to the inclination angle of the waterway escape ramp installed in the concrete U-bench plume pipe channel. Forthe experiment, an escape test device was manufactured with the same shape and number of materials applied in the field. And Rana coreana living in paddy wetlands were sel selected. The main behaviors of frogs on the slope were 'jumping', 'crawling' and 'slipping', and afterrecording the behavioralresults according to the inclination angle, statistical analysis was conducted using the chi-square test method. As a result of the analysis, there was no statistically significant difference between 30° and 40°. This result is an evidence for expanding the standard of inclination angle 30° suggested in the 'Guidelines for Installation and Management of Ecological Pathways' to a maximum of 40°. However, further research is required in that the escape ramp targets not only Korean frogs but also various small wild animals. However, considering that various wild animals are affected by artificial canals, additional studies using various target wild animals are needed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.6
• /
• pp.417-427
• /
• 2010

In the ease that a new cross tunnel is constructed under the existing tunnel, development of a longitudinal arching would be influenced by the existing tunnel. But it is not enough to investigate. Especially, the influence of the structure loads on the ground surface on the new tunnel, which the under-passes existing tunnel has been rarely studied. This study, therefore, aimed to clarify the effect of the existing tunnel and the structure on the ground surface on the development of a longitudinal ground arching during the excavation of a cross tunnel under the existing tunnel. Two-dimensional model tests were carried out in the test box, whose dimension was 30 cm (wide) ${\times}$ 113 cm (deep) ${\times}$ 87 cm (high). The existing tunnel was made of S21 steel tube in 16 cm diameter and 1 mm thickness. The ground surface load was 4.9 kPa and was loaded on the model structure in the size with 30 cm width ${\times}$ 16 cm height. New tunnel was excavated in 250 mm height by a bench cut method. As results, the longitudinal arching would be developed but it was severely influenced by not only the existing upper tunnel but also the ground surface load. The influence of the ground surface load on the development of longitudinal ground arching around a new tunnel showed the highest value when the tunnel face located direct under the surface load.

• Journal of Life Science
• /
• v.25 no.8
• /
• pp.932-935
• /
• 2015

The purpose of this study was the effect of complex training of obese men in their 30s on inflammatory markers and homocysteine, a risk factor for cardiovascular disease. The subjects consisted of obese men (n=12) with the body fat ratio of 25% or above in their mid 30s who had no medical conditions and can follow the exercise routine required by this study. To achieve the purpose of this study measured the maximum oxygen intake (VO_2max) and 1RM of 5 kinds of machine(bench press, lat pull down, arm curl, leg press, squat) as a preliminary test; based on the results, performed 8 weeks complex training (aerobic exercise + weight training); and then analyzed the variation in body composition (body weight, body fat and BMI), blood inflammatory markers (IL-6, TNF-α and CRP), and homocysteine between before and after training. The results exhibited that 8 weeks complex training reduced weight, body fat and BMI significantly (p<0.01) and also reduced inflammatory marker CRP and homocysteine, a risk factor for cardiovascular disease, significantly (p<0.05). In conclusion, 8 weeks complex training confirmed the variation in body composition, and this variation has a positive effect on the inflammatory marker and the risk factor for cardiovascular disease.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.1
• /
• pp.37-45
• /
• 1993

We research on the coordinate transformation between Korean geodetic system and WGS 1984. We made the wide area an object of our research. This area covers the range of longitude $1^\circ$ 32'and latitude $1^\circ$ 7'and is four times wider than a first stage research published in 1992. For this research, we performed GPS observations at 10 control point (seven astrogeodetic points, three triangulation points) and eight banch marks nearby control points, and then transformed the coordinates of WGS 84 to Korean geodetic system using the 7 parameter method, Molodensky method and MRE method. From this test, we compared the precision of the coordinate transformation by each method and checked which method is more applicable to Korea. We could find that the precision by 7 parameter method is three times better than the other methods and that the coordinate transformation by 7 parameter method is possible with the precision of 0".017, 0".016, 0.329 m in latitude, longitude and height. We could check and correct the height blunder of the control points by the bench marks nearby control point. We also could find the precision of coordinate transformation is more improved by the correction of height blunder.t blunder.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.11
• /
• pp.636-641
• /
• 2015

Waste energy conversion to SRF (Solid Refuse Fuel) has the effects not alternative fossil fuel usage but also the reduction of greenhouse gas. But the direct burning of the SRF including a plastic waste generates air pollution problem like soot, dioxin, etc. so that an application of pyrolysis and gasification treatment should be needed. The purpose of this study is to supply a basic thermal data of the pyrolysis gasification characteristics in the plastic-rich SRF which are needed for developing the novel pyrolyser or gasifier. To do so, a bench-scale test rig was newly engineered, and then experiments were achieved for the production characteristics of gas, tar, and char. While SRF sample, gasification air ratio, holding time changed as 2 g, 0.691, 32 min respectively, the $H_2$ 1.36%, $CH_4$ 2.18%, CO 1.88%, $Cl_2$ 15.9 ppm, HCl 6.4 ppm were composed. Also light tar benzene $4.03g/m^3$, naphthalene $0.39g/m^3$, anthracene $0.11g/m^3$, pyrene $0.06g/m^3$, gravimetric tar $18g/m^3$, and char 0.29 g was formed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.2
• /
• pp.54-61
• /
• 1998

The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

• Composites Research
• /
• v.29 no.3
• /
• pp.111-116
• /
• 2016

The tilting pad journal bearing for the turbo compressor application has a role to support high speed and heavy loading rotor. White metal has been widely used for the bearing material but the conventional bearing is immediately suspended and induces serious serious damage to the rotor under the unexpected oil cut situation or the insufficient oil film formation. The carbon fiber reinforced composite having high specific stiffness, specific strength and excellent tribological characteristics can solve these seizure problems. In this work, the study on the durability of high thermal resistance carbon fiber/epoxy composite tilting pad journal bearing under oil cut situation was conducted. The material properties of the composite materials including tensile, compressive and interlaminar properties were measured at room and high temperature of oil cut situation. To investigate the possibility of failure of composite tilting pad journal bearing under oil cut situation, the stress distribution of the composite bearing was analyzed via finite element analysis and the Tsai-Wu Failure index was calculated. To verify the failure analysis results, the oil cut tests for the composite tilting pad journal bearing were conducted using industrial test bench.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.136-141
• /
• 2005

A bench-scale feasibility study was conducted with solid farming feed to evaluate a treatment process for microbiological removal of nitrogen (N) and phosphorus (P). Strains, Bacillus sp. CK-10 and Bacillus sp. CK-13, were originally isolated from water samples of shrimp farming pond. Simultaneous removal of N/P in marine media was monitored in the co-cultures, CK-10 and CK-13. As the results, $400\;{\mu}M\;NH^{+}_4$ and $400\;{\mu}M\;NO^{-}_2$ were eliminated within 12 hours and $NO^{-}_3$ within 36 hours, and $500\;{\mu}M\;PO^{-3}_4$ was completely disappeared within 36 hours from the media. Cultures of CK-10 and CK-13 were applied for removal of N/P leached from shrimp farming fred. HPAEC-PAD system was used to analyze sugars in farming feed, resulting in resolution of various sugars including glucose, galactose, galatosamine, mannose, and fucose. $0.2\%$ (w/v) Pulp densities of the farming feed contained approximately $33.3\;{\mu}M\;NH^{+}_4,\;12.9\;{\mu}M\;NO^{-}_2.\;81.5\;{\mu}M\;NO^{-}_3\;and\;248\;{\mu}M\;PO^{-3}_4$ which could dissolved within 72 hours of leaching in aqueous solution followed by bacterial removal. Complete bacterial removal of N/P was achieved within 84 hours at $0.2\%$ of the feed in co-cultures, whereas single cultures removed to incompletion of N/P during the incubation period. This work demonstrated that test cultures, CK-10 and CK-13 showed effective removal of N/P derived from shrimp farming feed.