• Journal of the Korean Institute of Gas
• /
• v.7 no.1 s.18
• /
• pp.47-52
• /
• 2003

The adsorption characteristics of rert-butyl mercaptan(TBM) on base activated carbon and activated carbon impregnated with $CuCl_2$ or KI were studied. Adsorption of TBM on the surface of the KI or $CuCl_2$ impregnated activated carbon was detected by gas chromatograph equipped with a flame photometric detector. The amount of adsorption on those impregnated carbon found to be 7 or 8 times greater than on the non-impregnated activated carbon and varied according to the concentration of impregnated metal. FT-IR measurement showed that major reaction occuring on the surface of the catalytic adsorbent was dimerization of TBM into di-tert-butyl disulfide which had no stench.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.53-58
• /
• 2006

A powder of destructive adsorbent was prepared by impregnating Mn and Cu on the surface of amorphous aluminosilicate. It catalytically dimerized tert-butyl mercaptan into di-tert-butyl disulfide on its surface. Turnover of the dimerization was strongly dependent on the surface morphology of the adsorbent, which could be altered by modification of aluminosilicate support. During the process of impregnation, which involved heat treatment at 500 ${^{\circ}C}$, the shape of the pore was preserved, though large fraction of micropores were eliminated. The reactive sites on the surface were poisoned as dimerization products strongly adhered on them. Therefore, high surface area was not always desirable. When the surface was heavily populated with “inkbottled” pores with a narrow entrance in uniform size, heavy poisoning of the reactive sites turned the destructive adsorbents almost useless.

• 한국가스학회:학술대회논문집
• /
• 1999.09a
• /
• pp.209-214
• /
• 1999

• Journal of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.177-183
• /
• 1968

The rate equations for the nucleophilic addition reactions of n-propyl- and tert-buryl mercaptan to 3,4-methylenedioxy-$\beta$-nitrostyrene over wide pH range were obtained. From this equations, the rate constants for n-propyl-and tert-butylmercaptide ions at high pH were obtained numerically as $1.26{\times}10^8$ and $3.98{\times}10^6\;M^{-2},\;sec^{-1}$, and for n-propyl- and tert-butyl mercaptan at low pH, $7.07{\times}10^{-3}$ and $1.5{\times}10^3\;M^{-1},\;sec^{-1}$ respectively.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.646-651
• /
• 1998

The molecular structure of sulfur compounds and the retention relationship are studied by gas chromatography. Analyzed sulfur compounds are, hydrogen sulfide, sulfur dioxide, carbon disulfide, ethyl mercaptan, dimethyl sulfide, iso-propyl mercaptan, normal propyl mercaptan, ethyl methyl sulfide, tert-butyl mercaptan, tetrahydrothiophene, thiophene, and 2-chlorothiophene. Multiple linear regression explains the retention relationship of molecular descriptors. In GC the temperature program is 30$^{\circ}C$ held for 10.5 min, and then increased to 150$^{\circ}C$ at a rate 15$^{\circ}C$/min. Predicted equation for relative retention time (RRT) using SAS program is as follows; $RRT=0.121bp+14.39dp-8.94dp^2+0.0741sqmw-35.78\; (N=8,\; R^2=0.989, \;Variance=0.175,\;F=66.21)$. RRTs are function of boiling point, the square root of molecular weight, molecular dipole moment, and boiling point effects mostly on RRT. The RRT is maximized at the molecular dipole moment of 0.805D, when using nonpolar columns. The planar and highly symmetric compounds are eluted slowly. The square, of correlation coefficient $(R^2)$ using SAS program, is 0.989, and the variance is 0.175 in training sets. For three sulfur compounds, the variance between observed RRTs and predicted RRTs is 0.432 in testing sets.