• 오토저널
• /
• 제13권4호
• /
• pp.76-84
• /
• 1991

The off-road tractive performance of tracked vehicles can be evaluated in terms of soil thrust, motion resistance and drawbar pull. The ability to predict accurately ground pressure distribution under track is of importance since the vehicle sinkage and motion resistance are closely related to it. While the formulation of the method for predicting ground pressure distribution follows closely in spirit the ideas outlined for the terrain with linear pressure- sinkage relation case by Garber and Wong, the analysis of various terrain stiffness is magnified by numerical implementation procedure. The effects of soil parameters on tractive forces can be introduced through the terrain-track interaction such as pressure-sinkage and shearing characteristics. It is illustrated by determining the drawber pull-slip relation and corresponding ground pressure distribution for the terrains typically chosen and by comparing the results with the conventional ones based on normal ground pressure. The factorial experiment method is finally adopted for checking the sensitivity of the values of soil parameters on the drawbar pull.

• 항공우주시스템공학회지
• /
• 제16권6호
• /
• pp.1-7
• /
• 2022

지형 추종을 시뮬레이션하기 위해 레이다 모의 지형 스캔 정보 생성 기법이 제시되었다. 레이다 모의 지형 스캔 정보 생성 기법은 레이다가 원하는 방위각, 고각 방향에 순차적으로 다수의 빔을 방사하는 것을 모사한다. 방사되는 각 빔의 방위각은 모두 동일하고, 고각은 서로 다르다. 각 빔을 통해 획득한 지형 정보를 통합하여 레이다 모의 지형 스캔 정보가 생성된다. 레이다 모의 지형 스캔 정보는 레이다 탐지점들로 구성되어 있다. 레이다 탐지점은 레이다로부터 멀어질수록 빔 중심선으로부터 멀어지는 경향이 있다. 이는 빔 폭이 일정한 각도를 가지기 때문이며, 방사 위치로부터 멀어질수록 빔의 스캔 영역이 넓어지는 것과 관련이 있다. 본 논문에서는 빔을 모사하여 생성된 레이다 모의 지형 스캔 정보를 분석하기 위해 기하학 기반 지형 스캔 정보 생성 기법을 제시한다. 기하학 기반 지형 스캔 정보는 기하학 탐지점으로 구성되며, 모든 기하학 탐지점은 빔 중심선 위에 존재한다. 두 기법이 생성한 지형 스캔 정보의 위도, 경도를 분석하여 빔 폭의 영향이 반영된 레이다 모의 지형 스캔 정보가 생성되었는지 확인하였다.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1060-1071
• /
• 2005

Passive gas dispersions over a 1/1000 scale terrain model at Eiffel type wind tunnel were reproduced by numerical simulation. Large eddy simulation was used to treat the sub-grid scale turbulences. The terrain features were represented by millions of point forces densely distributed over the solid surface using the virtual boundary method. The model simulations agreed very well with the experiments in a consistent fashion for all wind directions. The measured profiles of the wind speeds as well as the tracer gas concentrations were nicely simulated by the CFD model at most locations scattered over the model terrain. With scale factor adjusted and the thermal stratification effects incorporated, the CFD model was expected to provide reliable information on pollutant dispersions over the real complex terrains.

• Earthquakes and Structures
• /
• 제26권2호
• /
• pp.149-162
• /
• 2024

Aiming at the current research on the dynamic response analysis of the vehicle-bridge system under earthquake, which fails to comprehensively consider the impact of seismic wave incidence angles, terrain effects and soil-structure dynamic interaction on the bridge structure, this paper proposes a multi-point excitation input method that can consider the oblique incidence seismic P Waves based on the viscous-spring artificial boundary theory, and verifies the accuracy and feasibility of the input method. An overall numerical model of vehicle-bridge-soil foundation system in valley terrain during oblique incidence of seismic P-wave is established, and the effects of seismic wave incidence characteristics, terrain effects, soil-structure dynamic interactions, and vehicle speeds on the dynamic response of the bridge are analyzed. The research results indicate that with an increase in P wave incident angle, the vertical dynamic response of the bridge structure decreased while the horizontal dynamic response increased significantly. Traditional design methods which neglect multi-point excitation would lead to an unsafe structure. The dynamic response of the bridge structure significantly increases at the ridge while weakening at the valley. The dynamic response of bridge structures under earthquake action does not always increase with increasing train speed, but reaches a maximum value at a certain speed. Ignoring soil-structure dynamic interaction would reduce the vertical dynamic response of the bridge piers. The research results can provide a theoretical basis for the seismic design of vehicle-bridge systems in complex mountainous terrain under earthquake excitation.

• 한국군사과학기술학회지
• /
• 제12권1호
• /
• pp.80-87
• /
• 2009

The purpose of this study is to analyze the MAUP's effect in visibility analysis using GIS. MAUP normally occurs in the process in terrain spatial analysis including visibility analysis. There are two different types of grid data(based on digital map and Digital Terrain Elevation Data) and 10 different types of areal units are made for modeling, such as $5m{\times}5m,\;10m{\times}10m,\;15m{\times}15m,\;20m{\times}20m,\;25m{\times}25m,\;30m{\times}30m,\;35m{\times}35m,\;40m{\times}40m,\;45m{\times}45m,\;50m{\times}50$. By analyzing the result, it was possible to observe varying viewshed areas according to different grid cell sizes and the viewshed area did not varied linearly as expected. From a general point of view, smaller unit data map out the real world in more detail, but the results of modeling do not always reach a good conclusion when data are used in modeling for terrain analysis because of the MAUP' effect. The grid cell sizes of 30m or less seems to be adequate for visibility analysis, including terrain analysis considering vegetation heights.

• 한국통신학회논문지
• /
• 제37C권9호
• /
• pp.791-801
• /
• 2012

SEAMCAT(Spectrum Engineering Advanced Monte Carlo Analysis Tool)은 다양한 통신 시스템 간에 발생할 수 있는 간섭 영향을 분석하는 도구로서 현재 널리 사용되고 있다. 기존의 SEAMCAT은 여러 가지 채널 전파 모델을 지원하고 있지만, 모두 경로 손실을 통계적으로 모델링하는 형태이기 때문에 구체적인 지형 정보를 활용하고 있지 않다. 따라서 기존의 SEAMCAT으로는 구체적인 지형 환경을 고려하여 전파 간섭 영향을 분석하기는 어렵다. 이런 제약을 해소하기 위해서는 구체적인 지형 정보를 토대로 경로 손실을 추정하는 채널 전파 모델을 SEAMCAT이 지원할 수 있도록 그 기능을 확장할 필요가 있다. 지형 정보를 감안하여 경로 손실을 추정하는 대표적인 채널 전파 모델로는 ITU-R P.526 모델이 있다. 본 논문에서는 ITU-R P.526 모델을 지원하는 SEAMCAT 기반 간섭 도구를 제안하고, 몇 가지 간단한 분석 사례를 보여주고자 한다.

• 한국대기환경학회지
• /
• 제16권3호
• /
• pp.211-223
• /
• 2000

The atmospheric dispersion of a pollutant emitted from a hypothetical source located in the middle of the Yochon Industrial Estate was simulated by using the Regional Atmospheric Modeling System (RAMS). Four horizontally nested grids were employed: the coarsest one covered the southern part of the Korean Peninsula including Mt. Chiri and the finest one covered the Yochon Industrial Estate and the surrounding area. Wind fields were initially assumed horizontally homogeneous with a wind speed of 4m/s, the average for the Yosu area, and were developed without both external forces and diurnal changes in order to investigate the terrain-induced phenomena. Wind directions that could emphasize the terrain effects on the pollutant transport and that could carry pollutants to a highly-popluated area were selected for the dispersion study. A pollutant was released for 24hours from a grid-base volume source after a 24-h blank run for developing the wind field. The dispersion study showed that the pollutant from the present source location did not directly affect the Yosu City, but showed high concentrations at locations behind the hills 5 to 6 km away from the source according to wind directions. When the wind speed was low, close to calm condition, the pollutant was detected at upstream locations 6 to 7 km from the source. In comparison with the results from the RAMS simulation, the Industrial Source Complex Short-Term Model(ISCST3) predicted a narrow dispersion that was sensitive to the wind direction. When the wind velocity was affected by the local environment, the ISCST3 calculation using that data also gave a lop-sided result, which was different from the distribution of the pollutant reproduced by RAMS.

• Wind and Structures
• /
• 제8권4호
• /
• pp.235-250
• /
• 2005

The paper describes the work of the Working Group on Wind Structure, one of the International Codification Working Groups set up by the International Association of Wind Engineering in 1999. The topics of terrain and exposure, shielding and shelter, topographic effects, tropical cyclone and hurricane wind structure, and thunderstorm wind structure, are described with emphasis on their codification in wind loading codes and standards. Recommendations from the working group are given.

• 대한공간정보학회지
• /
• 제4권2호
• /
• pp.195-203
• /
• 1996

노선계획 및 선정시 지형의 입체적 분석은 정책입안의 효율적인 판단을 내리는데 중요한 기초자료로 사용된다. 본 연구는 수치지형자료를 이용하여 지형을 모형화, 분석 및 재현함으로써 대상지역내의 진입노선 및 설계교량에 대한 선형을 효율적으로 결정하고자 하였다. 연구대상지역에 대한 등고선도, 불규칙삼각망도, 격자망도와 같은 수치지형모형을 바탕으로 사면경사도, 경사방향도, 음영기복도, 시정선도 및 유하선도를 분석하였다. 또한 절. 성토량을 산정하고 유토목선을 도시함으로써 도로공사를 위한 토공량을 예측할 수 있었으며 도로와 지형의 모의관측으로 시공후의 경관을 파악할 수 있었다. 이와 같이 입체적 지형자료의 시각적 효과는 계획가와 의사결정자가 대상지역의 지형적 특성을 고려하여 대안노선을 선정 및 검토하는데 효과적임을 제시할 수 있었다.

• 대기
• /
• 제31권1호
• /
• pp.85-100
• /
• 2021

The necessity of accurate high-resolution meteorological forecasts becomes increasing in socio-economical applications and disaster risk management. The Korea Meteorological Administration Post-Processing (KMAPP) system has been operated to provide high-resolution meteorological forecasts of 100 m over the South Korea region. This study evaluates and improves the KMAPP performance in simulating wind speeds over complex terrain areas using the ICE-POP 2018 field campaign measurements. The mountainous measurements give a unique opportunity to evaluate the operational wind speed forecasts over the complex terrain area. The one-month wintertime forecasts revealed that the operational Local Data Assimilation and Prediction System (LDAPS) has systematic errors over the complex mountainous area, especially in deep valley areas, due to the orographic smoothing effect. The KMAPP reproduced the orographic height variation over the complex terrain area but failed to reduce the wind speed forecast errors of the LDAPS model. It even showed unreasonable values (~0.1 m s-1) for deep valley sites due to topographic overcorrection. The model's static parameters have been revised and applied to the KMAPP-Wind system, developed newly in this study, to represent the local topographic characteristics better over the region. Besides, sensitivity tests were conducted to investigate the effects of the model's physical correction methods. The KMAPP-Wind system showed better performance in predicting near-surface wind speed during the ICE-POP period than the original KMAPP version, reducing the forecast error by 21.2%. It suggests that a realistic representation of the topographic parameters is a prerequisite for the physical downscaling of near-ground wind speed over complex terrain areas.