• 한국항공운항학회지
• /
• 제29권4호
• /
• pp.88-95
• /
• 2021

In aviation meteorology, the low level wind shear is defined as a sudden change of head windbelow 1600 feet that can affect the departing and landing of the aircraft. Jeju International Airport is an area where low level wind shear is frequently occurred by Mt. Halla. Forecasting of such wind shear would be useful in providing early warnings to aircraft. In this study, we investigated the performance of statistical downscaling model, called Korea Meteorological Administration Post-processing (KMAP) with a 100 m resolution in forecasting wind shear by the complex terrain. The wind shear forecasts was produced by calculating the wind differences between stations aligned with the runways. Two typical wind shear cases caused by complex terrain are validated by comparing to Low Level Wind Shear Alert System (LLWAS). This has been shown to have a good performance for describing air currents caused by terrain.

• Spatial Information Research
• /
• 제18권3호
• /
• pp.1-11
• /
• 2010

최근 댐 저수지 주변의 3차원 공간정보 구축은 퇴사량 조사와 같은 댐 관리 업무에 매우 중요한 부분이나 기존에는 지형측량을 위해 토탈스테이션과 단빔음향측심기(SBES)를 사용한 관계로 정밀한 지형자료 취득이 어려웠다. 본 연구에서는 LiDAR와 멀티빔음향측심기(MBES)를 이용하여 댐 저수지 주변의 정밀 지형자료를 구축하는 기법을 제시하였다. 먼저, 육상부에 대해 LiDAR 측량을 수행한 후 지상기준점을 이용한 캘리브레이션을 수행하였으며 건물이나 수목을 제거하는 알고리즘을 통해 육상부의 DEM 자료를 구축하였다. 구축된 LiDAR DEM을 GPS 지형측량과 검측한 결과 표준오차는 0.108m로 나타났으며, 따라서 LiDAR 허용오차를 만족하는 3차원 지형자료를 구축할 수 있었다. 또한 저수지에 대해서는 MBES를 수행한 후 지형측량과의 검측과정을 통해 IHO의 수심측량 허용오차 기준을 만족하는 지형정보를 구축할 수 있었다. 그리고 LiDAR와 MBES 측량자료를 통합한 후 고해상도 정사영상지도와의 연계를 통해 퇴사량 예측 및 지형변화 모니터링 등과 같은 댐 관리 업무에 활용 가능한 3차원 공간영상정보를 구축할 수 있었다.

• 한국환경과학회지
• /
• 제23권2호
• /
• pp.207-218
• /
• 2014

A ventilation model was developed for predicting the air change per hour(ACH) in buildings and the airflow rates between zones of a multi-room building. In this model, the important parameters used in the calculation of airflow are wind velocity, wind direction, terrain effect, shielding effect by surrounding buildings, the effect of the window type and insect screening, etc. Also, the resulting set of mass balance equations required for the process of calculation of airflow rates are solved using a Conte-De Boor method. When this model was applied to the building which had been tested by Chandra et al.(1983), the comparison of predicted results by this study with measured results by Chandra et al. indicated that their variations were within -10%~+12%. Also, this model was applied to a building with five zones. As a result, when the wind velocity and direction did not change, terrain characteristics influenced the largest and window types influenced the least on building ventilation among terrain characteristics, local shieldings, and window types. Except for easterly and westerly winds, the ACH increased depending on wind velocity. The wind direction had influence on the airflow rates and directions through openings in building. Thus, this model can be available for predicting the airflow rates within buildings, and the results of this study can be useful for the quantification of airflow that is essential to the research of indoor air quality(temperature, humidity, or contaminant concentration) as well as to the design of building with high energy efficiency.

• Journal of Radiation Protection and Research
• /
• 제23권4호
• /
• pp.251-257
• /
• 1998

국내 원전에 적용하기 위한 기체 방사성 물질 확산 및 피폭 평가 코드를 개발하였다. 정상 운전에 의한 기체 방사성 물질 확산 및 피폭 평가에는 직선 궤도 가우시안 플륨 모델을 사용하는 XOQDOQ 코드가 사용되어 왔다. 본 연구에서는 이 코드의 단점인 발전소 주변 지역에서의 바람 방향의 영향, 산악 지형에 대한 모델, 습식 침적에 대한 개선이 이루어졌다. 현실적인 유효 고도 보정 및 산악 침투 모델을 통해서 산악 지형에 대한 고려를 하였고, 바람 발생 확률 빈도를 수정하여 직선 궤도 모델을 보완하였다. 개발된 코드는 영광원전의 주민피폭선량평가를 위해 채택되었으며, 산악이 많은 우리 나라 다른 발전소에 적용하기 위해 산악지형 입력변경을 통하여 적절히 사용될 수 있을 것이다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2012년도 전기공동학술대회 논문집
• /
• pp.219-219
• /
• 2012

• 한국대기환경학회지
• /
• 제18권2호
• /
• pp.67-83
• /
• 2002

The coupled model (SMART) of dynamic meteorology model and particle dispersion model was developed. The numerical experiment on the relationship between change of land use and diffusion behavior in complex terrain was carried out using this model. It tried to investigate the change of particle diffusion behavior and local weather under the condition in which land-land breeze and sea breeze and mountain breeze intermingled. The numerical experiment results are as follows; 1) The more complicated local circulation field of the interaction of sea breeze, mountain breeze and Land -land breeze is formed. Then, the region circulation in which the urbanization is specific by location of the region is strengthened and is weakened. 2) Though in the region with dominant sea breeze, Land-land breeze does not appear directly, the progress of the sea wind to the inland is affected. 3) In the prediction of the air diffusion, emission high quality and accurate information of the emission site are important. That is to say, the dispersion predicting result which emission high quality and small error of the site perfectly vary for Land - land breeze in the effect may be brought about.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.199-204
• /
• 2003

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously, The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the technique of the spatial information system using computer, In this study, using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we t]v to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for local terrain model generation and earthwork volume.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.523-537
• /
• 2004

In order to raise the accuracy of meteorological data, several numerical experiments about the usefulness of data assimilation to prediction of air pollution was carried out. Used data for data assimilation are surface meteorological components observed by Automatical Weather System with high spatial density. The usage of surface data assimilation gives changes of temperature and wind fields and the change caused by the influence of land-use on meterological simulation is more sensitive at night than noon. The data quality in assimilation it also one of the important factors to predict the meteorological field precisely and through the static IOA (Index of Agreement), simulated meteorological components with selected limited surface data assimilation are agree well with observations.

• 한국컴퓨터정보학회논문지
• /
• 제23권2호
• /
• pp.17-26
• /
• 2018

In this paper, we propose a gait type classification method based on pressure sensor which reflects various terrain and velocity variations. In order to obtain stable gait classification performance, we divide the whole gait data into several steps by detecting the swing phase, and normalize each step. Then, we extract robust features for both topographic variation and speed variation by using the Null-LDA(Null-Space Linear Discriminant Analysis) method. The experimental results show that the proposed method gives a good performance of gait type classification even though there is a change in the gait velocity and the terrain.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.516-517
• /
• 2016

I use Jansen mechanism to reduce the unnecessary motion of car body and improve the motion performance capability in the rugged terrain To reduce the unnecessary motion, the positional variation of a main body of vehicle should be minimized. In order to reduce the change of height and control the speed at every moment when vehicle move, 16 legs or more are installed on a crankshaft and the paths of leg motions need to be considered in the rugged terrain. The vehicle will be optimized so that it produces a sufficient speed and torque for practical use. Finally, I designed proper body with Edison simulation. The simulation is good for beginners of mechanism design.