• Archives of Pharmacal Research
• /
• 제28권9호
• /
• pp.1097-1102
• /
• 2005

An O/W microemulsion system was developed to enhance the skin permeability of ace-clofenac. Of the oils studied, Labrafil? M 1944 CS was chosen as the oil phase: of the microemulson, as it showed a good solubilizing capacity. Pseudo-ternary phase diagrams were constructed to obtain the concentration range of oil, surfactant, Cremophor ELP, and co-surfactant, ethanol, for micoemulsion formation. Eight different formulations with various values of oil of $6-30\%$, water of $0-80\%$, and the mixture of surfactant and co-surfactant (at the ratio of 2) of $14-70\%$. The in vitro transdermal permeability of aceclofenac from the microemulsions was evaluated using Franz diffusion cells mounted with rat skin. The level of aceclofenac permeated was analyzed by HPLC and the droplet size' of the microemulsions was characterized using a Zetasizer Nano-ZS. Terpenes were added to the microemulsions at a level of $5\%$, and their effects on the skin permeation of aceclofenac were investigated. The mean diameters of the microemulsions ranged between approximately $10\~100nm$, and the skin permeability of the aceclofenac incorporated into the microemulsion systems was 5-fold higher than that of the ethanol vehicle. Of the various terpenes added, limonene had the best enhancing ability. These results indicate that the microemulsion pystem studied is a promising tool for the percutaneous delivery of aceclofenac.

• 한국재료학회지
• /
• 제9권5호
• /
• pp.452-459
• /
• 1999

고연소도 핵연료피복관용 신합금 재료를 개발하기 위한 연구로 Zr-0.8Sn-xNb(x = 0.2,0.4,0.8, 1.0) 계 합금을 제조하여 Nb 첨가량이 Zr 합금의 미세구조 및 부식특성에 미치는 영향을 조사하였다. 미세조직 관찰결과 Nb첨가량이 증가함에 따라 결정립의 크기는 강소하였고 석출물의 량은 증가하였다. $360^{\circ}C$ 물 분위기에서 부식시험 한 결과 Nb 함량이 적을수록 부식저항성이 증가하는 경향을 나타냈으며며, Zr-0.8Sn-0.2Nb 합금이 가장 우수한 부식저항성을 보였다. 동얼 두께의 산화막에 대하여 XRD 분석한 결과, 내식성이 우수한 0.2 wt.% Nb 합금에서는 산화막내 tetra-$ZrO_2$의 분율이 높게 관찰되었다. 합금설계 관점에서 Zr-O.8Sn-xNb 합금계에 Nb올 첨가할때 Nb은 고용도 이하로 첨가되어야 한다고 사료된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.159-159
• /
• 2011

Among the semiconductor ternary compounds in the I-III-$VI_2$ series, $CulnS_2$ ($CulnSe_2$) are one of the promising materials for photovoltaic applications because of the suitability of their electrical and optical properties. The $CuInS_2$ thin film is one of I-III-$VI_2$ type semiconductors, which crystallizes in the chalcopyrite structure. Its direct band gap of 1.5 eV, high absorption coefficient and environmental viewpoint that $CuInS_2$ does not contain any toxic constituents make it suitable for terrestrial photovoltaic applications. A variety of techniques have been applied to deposit $CuInS_2$ thin films, such as single/double source evaporation, coevaporation, rf sputtering, chemical vapor deposition and chemical spray pyrolysis. This is the first report that $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) technique which is a novel and attractive method because thin films with high deposition rate can be grown at very low cost. In this study, $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) method which employs a nozzle expansion. The mixed fluid is expanded through the nozzle into the chamber evacuated in a lower pressure to deposit $CuInS_2$ films on Mo coated glass substrate. In this AJD system, the characteristics of $CuInS_2$ films are dependent on various deposition parameters, such as compositional ratio of precursor solution, flow rate of carrier gas, stagnation pressure, substrate temperature, nozzle shape, nozzle size and chamber pressure, etc. In this report, $CuInS_2$ thin films are deposited using the deposition parameters such as the compositional ratio of the precursor solution and the substrate temperature. The deposited $CuInS_2$ thin films will be analyzed in terms of deposition rate, crystal structure, and optical properties.

• 한국표면공학회지
• /
• 제36권3호
• /
• pp.229-233
• /
• 2003

Boron-Carbon-Nitrogen (B-C-N) system is an attractive ternary material since it has not only an extremely high hardness but also a number of other prominent characteristics such as chemical inertness, elevated melting point, and low thermal expansion. In this paper, the corrosion behavior of B-C-N thin films in aqueous solution was investigated B-C-N films with different composition were deposited on a platinum plate by magnetron sputtering in the thickness range of 150-280 nm. In order to understand effect of pH of solutions, $BC_{2.\;4}N$ samples were immerged in 1M HCl, 1M NaCl, and 1M NaOH solution at 298k, respectively. BCN samples with different carbon contents were exposed to 1M NaOH solutions to investigate effect of chemical composition on corrosion resistance. Corrosion rates of samples were measured by ellipsometry, From results, optical constant of $BC_{2,\;4}N$ films was found to be $N_2=2.110-0.295i$. The corrosion rates of $Bi_{1.\;0}C_{2.\;4}N_{1.\;0}$ films were NaOH>NaCl>HCl in orders. With increasing carbon content in B-C-N films, the corrosion resistance of B-C-N films was enhanced. The lowest corrosion rate was obtained for $B_{1.\;0}C_{4.\;4}N_{1.\;9}$ film.

• 한국표면공학회지
• /
• 제36권3호
• /
• pp.256-262
• /
• 2003

The current efficiency and the composition of Zn-Cr and Zn-Cr-X (X : Co, Mn) alloy electrodeposits were investigated by using chloride bath with EDTA auditive and flow cell plating system. The current efficiency of Zn-Cr alloy decreased with increasing current density, while it increased with the content of Co and Mn of the Zn-Cr-X alloy bath in high current density region. The Cr content in Zn-Cr alloy increased from 1.4-2.7 to $28wt\%$ with increasing current density and the phase structure of the alloys changed from $\eta-Zn$ through $\eta-Zn+\gamma'-ZnCr\;to\;\gamma'-ZnCr$ with Increasing Cr content of the alloys. The Co content in Zn-Cr-Co alloys increased with Co content of the bath, while Cr content of the alloy increased or decreased in low current density region $(10-75A/dm^2)$ or high current density region $(75-100A/dm^2)$, respectively. $\gamma-ZnCo$ phase was formed in the Zn-Cr-Co alloy with above $9.0wt\%$ Co. The content of Mn and Cr in Zn-Cr-Mn alloys increased or decreased with the increase of current density in high current density region, respectively while Cr content of the alloy decreased noticeably with the increase of Mn content in the bath. Two phases of $\delta_1-ZnMn$ and $\gamma'-ZnCr$ were formed in the Zn-Cr-Mn alloy with above $8.6wt\%$ Mn.

• 한국수소및신에너지학회논문집
• /
• 제9권1호
• /
• pp.31-37
• /
• 1998

Ti-Cr-V의 3원계 합금에 대하여 결정구조 격자상수 및 $30^{\circ}C$에서의 수소저장 특성을 조사하였다. 실험영역에서 Ti-Cr-V의 3원계 합금은 거의 모두 bcc구조를 갖는 단일상으로 구성되어 있고, 수소저장용량 및 유효수소저장용량은 합금 조성의 Ti/Cr비에 크게 의존하였으며, Ti/Cr비 약 0.75에서 그 최대치를 보였다. 합금들의 격자상수는 Ti/Cr비가 증가함에 따라 직선적으로 증가하였다. Ti/Cr비와 격자상수, 수소저장용량 및 유효수소 저장용량의 관계를 각 원소의 수소와의 친화력 및 순금속에서의 격자상수의 차이로써 설명하였다.

• Korean Chemical Engineering Research
• /
• 제50권1호
• /
• pp.55-60
• /
• 2012

분리벽형 증류탑으로 상용화된 열복합 증류 시스템의 에너지 절약효과와 엑서지 손실을 기존의 3성분 분리 시스템인 2 탑 증류탑의 에너지 사용량 및 엑서지 손실과 비교하였다. 비교에 사용한 예제공정으로 석유화학 공장에서 보편적으로 사용하는 벤젠-톨루엔-m-자일렌 분리 공정을 대상으로 하였다. 본 연구에서는 열복합 증류탑의 설계방법을 제시하고 HYSYS를 이용하여 계산된 에너지 사용량을 비교하였다. 동일한 증류단수를 사용하였을 때 열복합 증류 시스템이 에너지 사용량을 28.2% 절감할 수 있음을 알았으며, 엑서지 손실은 10.4% 더 많았다. 엑서지 손실의 증가는 열복합 증류탑의 양방향 연결 흐름에 의한 증류단 내에서의 추가적인 혼합과 주탑 하부에서의 압력상승에 의한 재비기에서의 온도 상승이 주요 원인이다.

• 한국재료학회지
• /
• 제23권11호
• /
• pp.638-642
• /
• 2013

Chalcopyrite $CuInSe_2$(CIS) is considered to be an effective light-absorbing material for thin film photovoltaic solar cells. CIS thin films have been electrodeposited onto Mo coated and ITO glass substrates in potentiostatic mode at room temperature. The deposition mechanism of CIS thin films has been studied using the cyclic voltammetry (CV) technique. A cyclic voltammetric study was performed in unitary Cu, In, and Se systems, binary Cu-Se and In-Se systems, and a ternary Cu-In-Se system. The reduction peaks of the ITO substrate were examined in separate $Cu^{2+}$, $In^{3+}$, and $Se^{4+}$ solutions. Electrodeposition experiments were conducted with varying deposition potentials and electrolyte bath conditions. The morphological and compositional properties of the CIS thin films were examined by field emission scanning electron microscopy (FE-SEM) and energy dispersive spectroscopy (EDS). The surface morphology of as-deposited CIS films exhibits spherical and large-sized clusters. The deposition potential has a significant effect on the film morphology and/or grain size, such that the structure tended to grow according to the increase of the deposition potential. A CIS layer deposited at -0.6 V nearly approached the stoichiometric ratio of $CuIn_{0.8}Se_{1.8}$. The growth potential plays an important role in controlling the stoichiometry of CIS films.

• 대한화학회지
• /
• 제38권9호
• /
• pp.653-659
• /
• 1994

pH 7인 수용액에서 2-thenoyltrifluoroacetone(TTA), n-octanol과 Triton X-100의 존재하에서 유로퓸과 사마륨의 형광세기가 크게 증가하였다. 또한 이 착물에 과량의 $La^{3+}$을 첨가할 때 형광세기가 100배 이상 증가하였다. 유로퓸과 사마륨의 최대 들뜨기 파장은 각각 345 nm과 380 nm이고, 최대 형광파장은 각각 617 nm, 567 nm 이었다. 유로퓸과 사마륨의 형광세기는 농도가 각각 $1{\times}10^{-7}∼1{\tiems}10^{-9}\;M,\;1{\tiems}10^{-5}∼1{\times}10^{-7}\;M$에서 직선적으로 증가하였고, 유로퓸은 $1{\times}10^{-11}\;M$ 그리고 사마륨은 $1{\times}10^{-8}\;M$까지 검출할 수 있었다.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2003년도 춘계학술연구발표회
• /
• pp.19-19
• /
• 2003

A cubic perovskite-type CaCu₃Ti₄O/sub 12/ compound has recently drawn a great attention because of an extraordinary high permittivity (～10⁴ at 1 kHz) at room temperature and its near temperature-independence over a wide temperature region, and thus numerous literature have been reported on CCTO polycrytalline ceramics and thin films. However, only a few literature have been reported on the CCTO single due to the lack of information about the CCTO primary phase field. On the basis of our recent experimental determination of the CCTO primary phase field, we could grow ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals using both top-seeded solution growth and flux growth methods. This presentation will include three major parts. In part I, the thermal decomposition reaction of CCTO and its primary phase field in the CaO-CuO-TiO₂ ternary system will be presented. Detailed growth conditions of ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals and characteristics of as-grown crystals will be followed in Part II. Part III will be comprised of dielectric properties of as-grown ACu₃Ti₄O/sub 12/(A=Ca, Sr) single crystals. Our experimental results will be compared with those of previous reports for discussion.