• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.93-104
• /
• 2021

A coastal ferries, which serve as a mode between mainland and offshore islands, are frequently used by islanders and travelers visiting islands. Therefore, it is located in a place with good accessibility to the downtown so that users can use it conveniently. However, research on the built environment and walking environment of coastal ferry terminals has not been conducted to ensure that elderly islanders and general travelers can use comfortably the coastal ferry terminal. In this study, with a focus on the coastal ferry terminal space, the walking section was set as 1)the accessibility of the coastal ferry terminal, 2)the built environment for using the coastal ferry terminal, and 3)walking environment in the ferry boarding and disembarkation at the coastal ferry terminal, and 4, 5)walking environment in the ferry. An evaluation tool was developed to measure the walking environment for each walking section, and the importance and satisfaction of users were analyzed using the IPA for the Yeosu Coastal Ferry Terminal. As a result, in the process of approaching the ferry terminal, 'convenience of using public transportation by foot' and 'convenience of using signposts guiding the location and direction of the ferry terminal' were investigated as concentrated areas. On the other hand, the built environment inside the ferry terminal and the walking environment showed that the satisfaction of the users was high. Regarding the walking environment from the ferry terminal to the ferry, the 'surface walking environment of the walking path', 'convenience of walking with luggage', 'convenience of walking in the slope section', and 'convenience of walking in the ferry ramp section' showed low satisfaction. This study can be used as basic data for improving the facilities and walking environment of Yeosu Coastal Ferry Terminal and is expected to be used as data for comparative research with other coastal ferry terminals.

• PNF and Movement
• /
• v.20 no.3
• /
• pp.341-349
• /
• 2022

Purpose: The purpose of this study is to compare the muscle activity of the hip abductors and the ratio between the hip abductor muscle group according to the range of hip abduction during the clam exercise. Methods: This study was conducted on 18 healthy men in their aged 20 to 29 who had not been diagnosed with spine-related diseases. The subjects performed a clam exercise without rotation of the pelvis in a state of 60° hip flexion and 90° knee joint flexion in the side-lying position. Using Myomotion equipment and EMG, the muscle activity of the hip abductor muscles and the activity ratio between the hip abductor muscle group were measured during the clam exercise by dividing the range into initial, mid-range, and terminal sections. Repeated measures analysis of variants was employed to compare the activity and use of hip abductor muscles according to range of motion during the clam exercise. Results: Gluteus medius muscle activation was significantly increased in the comparison of muscle activity in the initial, mid-range, and terminal sections of hip abduction. Tensor fasciae latae muscle activation was significantly increased in the comparison of muscle activity in all range of motion sections as well. The gluteus medius-tensor fasciae latae muscle activation ratio was significantly increased in the terminal section compared to the initial section. Conclusion: The gluteus medius and tensor fasciae latae had higher muscle activities as they approached the terminal section during the clam exercise, and the hip abduction activity ratio of the gluteus medius and tensor fasciae latae was higher as the range of motion approached the terminal section.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.210-215
• /
• 2003

A terminal pin, which is a part of high-voltage capacitors, has a head section of plate-shaped geometry with 0.8 thickness. The current manufacturing process, in which the head section is welded on the body part, has given wide deviations of part qualities such as geometrical accuracy, mechanical strength and electrical stability. In this paper, a cold forging process sequence was designed in order to produce the terminal pin as one piece. The plate-shaped head section requires an upsetting in the lateral direction of a cylindrical billet, which is followed by a blanking process. The deformed geometry of the upsetting, however, could not be predicted precisely by intuition since metal flows of an axial and a lateral direction of the cylindrical billet would occur simultaneously. Therefore, the geometry of the initial billet was determined by three dimensional finite element analysis in order to avoid defects in blanking process and intermediate forging processes were designed by applying design rules and two dimensional FE analysis. In addition, cold forging tryouts were conducted by using the die sets which were manufactured based on the designed process sequence.

• Transactions of Materials Processing
• /
• v.13 no.7
• /
• pp.586-593
• /
• 2004

A terminal pin, which is a part of high-voltage capacitors, has a plate-shaped head section with thickness of 0.8mm. The current manufacturing process, in which the head section is welded on the body part, has given wide deviations of part qualities such as geometrical accuracy, mechanical strength and electrical stability. In this study, a cold forging process sequence was designed in order to produce the terminal pin as one piece. The plate-shaped head section requires an upsetting in the lateral direction of a cylindrical billet, which is followed by a blanking process. The deformed geometry of the lateral upsetting, however, could not be predicted precisely by intuition since metal flows of an axial and a lateral direction of the cylindrical billet would occur simultaneously. Therefore, in this study, three dimensional finite element analyses were applied to the lateral upsetting process in order to determine a proper diameter and height of the cylindrical billet. Once the geometry of the initial billet was determined, intermediate forging processes were designed by applying cold forging guidelines and the designed process sequence was verified by two dimensional finite element analysis. In addition, cold forging tryouts were conducted by using a die set, which was manufactured based on the designed process and finally we found that the part qualities were improved by the proposed cold forging process.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.67-70
• /
• 1997

This Paper describes the system configuration and implementation method of an IMPRES (Interactive Multimedia exPRESS) terminal. The terminal is developed in the form of a PC add-on board that is called MINIBA (Media and Network Interface Board Assembly). IMPRESS is a communication service platform that support various interactive multimedia services. The main objectives of developing IMPRESS are to implement DAVIC compliant services platform to verify DAVIC specification and to support testing environment. Currently IMPRESS terminal provides MPEG-2 quality movies on demand, switched video broadcasting, and home-shopping service to the service user, based on the ATM network.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.272-275
• /
• 2003

This paper presents the role and its function of Tool server. MPEG-21 means multimedia framework for delivery and consumption of multimedia which is being discussed in ISO/IEC 21000. A view of MPEC-21 aims to define multimedia framework to enable transparent use of multimedia resource across a wide range of networks and devices used by different communities. MPEG-21 will enable all-electronic creation delivery and trade of digital multimedia content and transparent usage of various content types on network device. Therefore, we can provide access to information and services from almost anywhere at anytime with various terminals and networks. In order to support multimedia delivery chain that contains content creation, production, delivery and consumption, we need many standards(elements) for identify, describe, manage and protect the content. Thus, we define Digital Item Player(DIP), Digital Item Adaptation(DIA) server and Tool server as primary objects of MPEG-21 multimedia framework. DIP provides a function which creates and consumes Digital Item(DI) as a kind of a digital object by user. A DI contains both media resources and metadata including rights information. DIA server deals with the usage environment description schema of the user characteristics, terminal and network characteristics and natural environments. DIA server adapts the original DI to the usage environment description sent from the terminal and transmits the adapted DI to the terminal. Tool server searches for a tool requested from DIP or DIA and downloads the best tool to DIP or DIA server. In this paper, we present how Tool sewer is organized and is used among 2 primary objects. The paper is structured as followings: Section 1 briefly describes why MPEG-21 is needed and what MPEG-21 wants. We see requirement that tool server must equip functionally in section 2. The proposed tool server,its structure and its functionality are presented in section 3. Section 4 explains a scenario that tool server transmits tool to DIP and shows the experimental result. The paper concludes in section 5.

• Honam Mathematical Journal
• /
• v.32 no.4
• /
• pp.625-632
• /
• 2010

The notions of commutative pre-logics and terminal sections are introduced. Characterizations of a commutative prelogic are provided. Properties of deductive systems in pre-logics which are upper semilattices are considered.

• Communications of the Korean Mathematical Society
• /
• v.27 no.2
• /
• pp.233-242
• /
• 2012

The notions of terminal sections of $BE$-algebras are introduced. Characterizations of a commutative $BE$-algebra are provided.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.277-280
• /
• 2001

Due to the explosive popularization of the Internet, it has been researched for many mobile terminals how to receive various multimedia information. Especially, it has been considered that a mobile terminal is serviced with multimedia information through a inherent IP address. In this paper we have proposed the Handover Signaling Method and analyzed the Handover delay time of this proposed method in wireless section. This proposed method is appropriate to Broadband systems with Mobile IP. We have simulated Handover delay time with respect to the distance between a terminal and base stations

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.135-140
• /
• 2010

This paper presents a sensorless speed control of BLDC Motor using terminal voltage of the one phase. Rotor position information is extracted by indirectly sensing the back EMF from only one of the three terminal voltages for a three-phase BLDC motor. Depending on the terminal voltage sensing rotor position, active filter is used for position information. This leads to a significant reduction in the component device of the sensorless circuit. Therefore this is a advantage for the cost saving and size reduction. With indirect sensing methods based on detection of the terminal voltage that require active filtering, the position information needs the six divider section by PLL circuit, the binary counter and johnson counter by the EPLD. Finally, this algorithm can estimate the rotor position information similar to Hall-sensor sticked the three-phase BLDC motor. As a result, the method described that it is not sensitive to filtering delays, allowing the motor to achieve a good performance over a wide speed range. In addition, a simple starting method and a speed estimation approach are also proposed. Experimental and simulation results are included to verify the proposed scheme.