• 한국전산구조공학회논문집
• /
• 제28권4호
• /
• pp.425-431
• /
• 2015

본 논문에서는 균열 진전문제에 대하여 페리다이나믹스 이론을 이용하여 설계민감도 해석 및 구조 최적설계를 수행하였다. 페리다이나믹스는 해의 불연속성을 다루기 어려웠던 기존의 연속체 이론에 비해 균열 진전문제와 같은 불연속성을 가지는 문제를 자연스럽게 표현할 수 있다는 장점을 가지고 있다. 최적설계를 진행하기 위하여 애조인 변수법으로 설계민감도를 유도하였다. 특히 균열이 진전되더라도 애조인 변수법으로 계산된 변위장과 변형에너지에 대한 설계민감도 값은 유한차분법과 비교하여 매우 정확하고 효율적임을 보였다. 이를 바탕으로 간단한 인장응력 하의 균열진전 문제에 대하여 균열의 분기가 발생하는 위치를 조절하기 위하여 정해진 시간구간에서 변형에너지 값을 줄이는 방향으로 최적설계를 수행하였다. 최적의 재료분포로 해석을 수행한 결과 균열의 분기점을 늦출수 있음을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제13권11호
• /
• pp.562-570
• /
• 2013

이미지를 감성으로 쾌 또는 불쾌, 긴장 또는 평온의 구분 감성을 트리 형식으로 가중치를 부여하여 평가한다. 이미지 대표평가 감성인 명도대비를 평가 기준으로 1차는 쾌, 불쾌 또는 긴장 또는 평온이고 2차는 세분화 이미지 감성으로 구분한다. 4개의 감성인식을 수치화 된 명도대비 데이터로 측정한다. 평가 구현은 OpenCV를 통해 명도대비를 그래프화하여 긴장, 평온, 쾌, 불쾌 값 변화에 따라 4개 감성으로 구분하여 컴퓨팅한다. 감성 컴퓨팅으로 명도대비의 입력된 값에 따라 '불쾌'를 '쾌' 또는 '긴장'을 '평온'으로 감성적 변화를 줄 수 있다. 이미지 감성의 규칙성을 계산화 된 컴퓨팅 시스템으로 제어할 수 있고 향후 산업방향에 감성 인식의 적용에 대한 긍정적인 역할을 할 것이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2011년도 정기 학술대회
• /
• pp.419-423
• /
• 2011

AE는 다른 비파괴 검사방법과 달리 가동 상태에서 구조물의 결함이 발생 및 성장을 검출 할 수 있으며, 연속 검사가 가능하다는 장점으로 인하여 대형 구조물의 안정성 평가에 널리 이용되고 있다. 하지만 AE는 20kHz부터 20MHz 사이에 발생하는 음파를 감지하기 위해 센서를 사용하며, 이 센서의 감도에 따라 결과가 달라질 가능성이 존재한다. 이에 본 연구에서는 STS 304와 SS400 강재에 인장실험을 실시하여, 강재의 균열 신호를 탐지하고자 한다. 인장실험에는 스테인리스강 및 탄소강 시편을 준비하였고, 감도가 다른 센서를 이용하여 동일한 인장실험을 실시하였다. 그리고 균열이 발생하는 13개의 신호 파라미터에 대해 군집분석을 실시하여 4가지 종류의 군집으로 분류하였다. 또한 기무가설을 이용한 통계분석을 통해 두 시험편이 다르지 않다는 것을 증명하였다. 이 결과를 바탕으로 본 실험에서 얻은 Waveform이 재료의 균열신호라는 신뢰성을 확인할 수 있었다.

• Wind and Structures
• /
• 제16권6호
• /
• pp.579-601
• /
• 2013

Interference effects are of considerable concern for group hyperboloidal cooling towers, but evaluation methods and results are different from each other because of the insufficient understanding on the structure behavior. Therefore, the mechanical performance of hyperboloidal cooling tower shell under wind loads was illustrated according to some basic properties drawn from horizontal rings and cantilever beams. The hyperboloidal cooling tower shell can be regarded as the coupling of horizontal rings and meridian cantilever beams, and this perception is beneficial for understanding the mechanical performance under wind loads. Afterwards, the mean external latitude wind pressure distribution, CP(${\theta}$), was artificially adjusted to pursue the relationship between different CP(${\theta}$) and wind-induced responses. It was found that the maximum responses in hyperboloidal cooling tower shell are primarily dominated by the non-uniformity of CP(${\theta}$) but not the local pressure amplitude CP or overall resistance/drag coefficient CD. In all the internal forces, the maximum amplitude of meridian axial tension shows remarkable sensitivity to the variation of CP(${\theta}$) and it's also the controlling force in structure design, so it was selected as an indicator to evaluate the influence of CP(${\theta}$) on responses. Based on its sensitivity to different adjustment parameters of CP(${\theta}$), an comprehensive response influence factor, RIF, was deduced to assess the meridian axial tension for arbitrary CP(${\theta}$).

• 만화애니메이션 연구
• /
• 통권39호
• /
• pp.393-412
• /
• 2015

사람의 이미지를 보고 느끼는 감성인식은 환경, 개인적 성향에 따라 다양하게 변화한다. 그리하여 이미지 감성인식을 숫자로 제어하려는 감성컴퓨터 연구에 집중되고 있다. 그렇지만 기존의 감성컴퓨팅 모형은 숫자화된 객관적이고, 명확한 측정이 미흡한 상황이다. 따라서 이미지 감성인식을 감성컴퓨팅을 통해 정량화하고, 객관적인 평가 방식의 연구가 필요한 상황이다. 이에 본 논문은 이미지 감성인식을 계산 방식에 따라 숫자화한 정량화로 감성크기를 표현했다. 그리하여 이미지 감성인식의 주요한 속성인 색채를 구성인자로 적용한다. 또한 디지털 색채 감성컴퓨팅을 적용하여 계산하는데 연구의 중점을 두었다. 이미지 색채 감성컴퓨팅 연구방식은 감성속성인 색상, 명도, 채도에 중요도에 따른 가중치를 감성점수에 반영한다. 그리고 감성점수를 이미지 감성계산식에 적용하여 쾌정도(X축), 긴장도(Y축)를 숫자 방식으로 계산한다. 거기에 쾌정도(X축), 긴장도(Y축)의 교차하는 위치점을 이미지 감성좌표의 감성점으로 위치한다. 이미지 색채 감성좌표는 러셀의 핵심 효과(Core Affect)를 적용하여 16가지 주요대표감성을 기반으로 한다. 이미지 감성점은 기준의 위치에서 대표감성크기와 감성상관관계를 숫자화하고, 이미지 감성을 정량화한다. 그리하여 이미지 감성인식은 숫자 크기로 비교한다. 감성점수의 대소에 따라 감성이 변화함을 증명한다. 비교 방식은 이미지 감성인식을 16개 대표감성과 연관된 감성의 상위 5위로 구분하고, 집중된 대표감성크기를 비교 분석한다. 향후 감성컴퓨팅 방식이 사람의 감성인식과 더 유사할 수 있도록 감성계산식의 연구가 필요하다.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.1-12
• /
• 2020

Pierre Robin syndrome is characterized by micrognathia, glossoptosis, and cleft palate. Infants with Pierre Robin syndrome causes feeding difficulty, upper airway obstruction, and other symptoms. This study aims to examine the effects of applying dysphagia treatment to infants with Pierre Robin syndrome. The study participant was an infant who was born four weeks premature and referred for dysphagia treatment approximately 100 days after birth. At the initial assessment, the infant showed oral sensory sensitivity, a high level of facial and masticatory muscle tension, and a low stability of the chin and cheeks with almost no normal "sucking-swallowing-breathing" pattern. We set the baseline period and intervention period using the AB design. During the baseline period, non-nutritive sucking training using a rubber nipple was conducted without implementing an oral stimulation intervention. During the intervention period, non-nutritive sucking training and an oral stimulation intervention were performed. After the intervention period, the infant's daily oral intake and oral intake per time significantly increased compared to that during the baseline period. We observed that the oral intake time of the infant decreased during the intervention period compared to that in the baseline period, which indicated an improvement in control over the chin, tongue, and lip movements, a change in muscular tension, and stabilization of the "sucking-swallowing-breathing" pattern. We provided dysphagia treatment before breastfeeding, it was positive effects such as normal development of the infant, transition from tube feeding to bottle feeding, and enhancement of overall oral motor function.

• Structural Engineering and Mechanics
• /
• 제61권6호
• /
• pp.785-794
• /
• 2017

This paper is concerned with the comparative numerical and experimental study on the natural behavior and the motion responses of a 1/75 moored scale model of a 2.5 MW spar-type floating offshore wind turbine subject to 1-D regular wave. Heave, pitch and surge motions and the mooring tensions are investigated and compared by numerical and experimental methods. The upper part of wind turbine which is composed of three rotor blades, hub and nacelle is modeled as a lumped mass and three mooring lines are pre-tensioned by means of linear springs. The numerical simulations are carried out by a coupled FEM-cable dynamics code, while the experiments are performed in a wave tank equipped with the specially-designed vision and data acquisition system. Using the both methods, the natural behavior and the motion responses in RAOs are compared and parametrically investigated to the fairlead position, the spring constant and the location of mass center of platform. It is confirmed, from the comparison, that both methods show a good agreement for all the test cases. And, it is observed that the mooring tension is influenced by all three parameters but the platform motion is dominated by the location of mass center. In addition, from the sensitivity analysis of RAOs, the coupling characteristic of platform motions and the sensitivities to the mooring parameters are investigated.

• 한국지진공학회논문집
• /
• 제17권5호
• /
• pp.219-225
• /
• 2013

This work examines the feasibility for estimating existing tensile stress on a stressed wire using the permeability of magnetic flux. A closed magnetic circuit has been constructed to induce magnetic flux inside a steel wire. With different tension stress levels on a wire, the permeability of magnetic flux on the wire has been measured. Two different experimental case studies have been conducted for the examination of sensitivity of permeability of magnetic flux on the stressed wire. One is a varying-length stress test, and the other is a fixed-length stress test. The results show that the permeability of magnetic flux in the varying-length stress test is inversely proportional to the applied stress, while the permeability in the fixed-length stress test is linearly proportional to the applied stress on the stressed wire. It is thus expected that the permeability of magnetic flux on a wire can be a promising indicator for the inspection of its tensile stress.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.793-800
• /
• 2008

Recently domestic drinking water industry has recognized membrane-based technology as a promising alternative for water treatment. To ensure successful application of membrane processes, the integrity of membrane systems should be maintained. According to US EPA guidance, the pressure decay test based on the bubble point theory is recommended to detect any membrane defection of which size is close to the smallest diameter of Cryptosporidium oocysts, $3{\mu}m$. Proper implementation of the pressure decay test is greatly affected by initial test pressure, and the interpretation of the test results is associated with upper control limit. This study is conducted to investigate various factors affecting determination of initial test prtessure and upper control limit, including membrane-based parameters such as pore shape correction factor, surface tension and contact angle, and system-based parameters, such as volumetric concentration factor and total volume of system. In this paper, three different hollow fibers were used to perform the pressure decay test. With identical initial test pressure applied, their pressure decay tendency were different from each other. This finding can be explained by the micro-structure disparity of those membranes which is verified by FESEM images of those membranes. More specifically, FESEM images revealed that three hollow fibers have asymmetry, deep finger, shallow finger pore shape, respectively. In addition, sensitivity analysis was conducted on five parameters mentioned above to elucidate their relation to determination of initial test pressure and upper control limit. In case of initial pressure calculation, the pore shape correction factor has the highest value of sensitivity. For upper control limit determination, system factors have greater impact compared to membrane-based parameters.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권4호
• /
• pp.21-24
• /
• 2016

The mechanical properties of REBCO coated conductor (CC) wires under uniaxial tension are largely determined by the thick component layers in the architecture, namely, the substrate and the stabilizer or even the reinforcement layer. Depending on device applications of the CC tapes, it is necessary to reinforce thin metallic foils externally to one-side or both sides of the CC tapes. Due to the external reinforcement of brass foils, it was found that this could increase the reversible strain limit from the Cu-stabilized CC tapes. In this study, the effects of differently hardened brass foil laminate on the electromechanical property of CC tapes were investigated under uniaxial tension loading. The tensile strain dependence of the critical current ($I_c$) was measured at 77 K and self-field. Depending on whether the $I_c$ of CC tapes were measured during loading or after unloading, a reversible strain (or stress) limit could be determined, respectively. The both-sides of the Cu-stabilized CC tapes were laminated with brass foils with different hardness, namely 1/4H, 1H and EH. From the obtained results, it showed that the yield strength of the brass laminated CC tapes with EH brass foil laminate was comparable to the one of the Cu-stabilized CC tape due to its large yield strength even though its large volume fraction. It was found that the brass foil with different hardness was mainly sensitive on the stress dependence of $I_c$, but not on the strain sensitivity due to the residual strain induced in the laminated CC tapes during unloading.