• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1144-1149
• /
• 2008

Converting technology has developed to print information for the decades. Recently, this technology (like gravure, gravure-offset) is rising as an alternative way for mass production of printed electronics such as RFID, solar cell. For the width of printing line is under 10 microns, registration error should be minimized less than several microns. Tension disturbance is main cause of registration error and this should be minimized before the substrate is transported into printing zone. With PI controller, it is possible to suppress the disturbance within 2% of operating tension. But register error appears more than 10 micron using PIcontroller considering noise. So LQG controller is needed as an alternative control method. In this paper, the comparision of PI and LQG controller in the converting machine including measured noise and tension disturbance is presented. It is shown that the LQG controller is more suitable for precision tension control in printed electronics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1096-1098
• /
• 2000

This paper proposes a tension control to compensate friction loss using on-line friction torque observer for a continuous strip processing line. Friction loss of roller results in significant deviation of strip tension. accordingly it has an influence on the operation of other adjacent rolls. To avoid tension variation of the strip, a friction torque observer is designed in adjacent roll, which operates in speed control mode. The experimental results show improvement of tension control performance by the proposed friction compensation method.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.28-34
• /
• 2016

When a electric power cable is installed in the air for newly or exchanged working, it is necessary at all time to hold a constant tension for an overhead power cable. And also a pendanted power cable is an extreme job to have work in a high sky. For this reason, the objective of this paper developments working robot for preventing disaster that tension of cable installed automatically power cable to hold a constant. So the working robot works at all the time two tasks for mobil and tension it come into a inference between two tasks, control is difficult. Control methode needs to suppress inference of two tasks. In this paper, for installation of overhead power cable, the scheme and control methode of working robot is presented. the robot work at a same time tow tasks that have hold a constant tension of the power cable and move a constant place while unfasten a winding cable at a drum on a chassis. Working robot consist of three parts with mobile system, tension system and control part. As it is applied the feedback/feedforward control, methode of hybrid control is established to suppress that interference come into between two tasks. The simulation programs is made out using models of mobil and tension system, and a proposed controllers. In accordance with simulation, the model of each systems is discussed to make out proper. And also parameters of controllers is selected a suitable value and the driving performance of robot is evaluated.

• 조명전기설비학회논문지
• /
• 제22권8호
• /
• pp.31-37
• /
• 2008

현재, 송전선등 전력케이블의 가설작업은 딥 측정으로 크레인에 의해 수작업에 의해 행해지고 있지만 안전과 효율적인 작업을 위해 가설작업의 자동화 시스템이 필요하다. 이러한 필요에 대하여 본 논문의 목적은 송전선 케이블의 가설을 위한 자동화 시스템의 개발이다. 본 논문은 현수형 송전 케이블과 장력발생 교류 서보전동기의 모델을 나타내고 송전케이블의 딥을 일정히 유지하기 위한 장력을 계산하는 알고리즘을 나타내었다. 현수형 송전선 특성에 기초하여 로드셀을 이용한 장력측정에 의해 송전선 가설 시스템의 구성법이 제안되었다. 가설시스템은 장력 발생장치에 교류서보 전동기를 이용하고 케이블의 장력계측 장치는 하중변환기(load cell)를 사용한다.

• Fibers and Polymers
• /
• 제3권2호
• /
• pp.80-84
• /
• 2002

Tension control is an important factor in producing high quality knitted products and in maintaining good processing condition. Yarn tension during knitting is subject to be affected from many elements of the machine and process parameters. Several factors including yam feeding speed, feeding angle, and needle gauge that are considered to influence on the tension variation were investigated. Yam feeding speed did not show high contribution to the tension variation but feeding angle of yam did show high correlation with the tension. No or negative correlation of the tension with needle gauge was found from the results. In order to keep well-determined process condition in the knitting manufacturing, it is strongly suggested that all knitting elements and parameters should be in the integrated control circumstance.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.956-962
• /
• 2008

This paper is devoted to yarn tension control problem in winding machines. The passive take-up unit is replaced by active one with ADRC(Active Disturbance Rejection Control) and it was compared with the method using conventional PD(Proportional-Derivative) controller. The main part of ADRC is ESO(Extended State Observer) which continuously estimates nonlinearities of the system, such as intrinsic nonlinearity, external disturbance and sensor noise. Then the estimated nonlinearity is used to compensate the real one, thus making controlled system linear. A number of experiments have been conducted in order to verify the performance of the original winding system to the modified one. Experiments have shown improved efficiency of the system with adopting active yarn tension control. Experimental results show that the ADRC achieves a better tension response than PD controller and is robust to parameters variation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.66.6-66
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Technical Background $\textbullet$ Tension control of a Hot Strip Mill $\textbullet$ Simulation $\textbullet$ Conclusion

• Journal of Applied Biological Chemistry
• /
• 제51권3호
• /
• pp.83-87
• /
• 2008

Tension wood, a specialized tissue developed in the upper side of the leaning stem and drooping branches of angiosperm, is an attractive experimental system attractive for exploring the development and the biochemical pathways of the secondary cell wall formation, as well as the control mechanism of the carbon flux into lignin, cellulose, and hemicellulose. However, the mechanism underlying the induction and the development of the tension wood is largely unknown. Recently, several researchers suggested the possible roles of the plant growth hormones including auxin, gibberellin, and ethylene mainly based on the expression pattern of the genes in this specialized tissue. In addition, expressed sequence tag of Poplar and Eucalyptus provide global view of the genetic control underlying the tension wood formation. However, the roles of the majority of the identified genes have not yet been clearly elucidated. The present review summarized current knowledge on the biosynthesis of tension wood to provide a brief synopsis of the molecular mechanism underlying the development of the tension wood.

• 한국정밀공학회지
• /
• 제18권11호
• /
• pp.86-92
• /
• 2001

Vibrational characteristics and tension fluctuation of a translating wire in WEDM are the main problems to deteriorate the cutting accuracy and processing performance. In this paper, we analyze natural frequencies of the wire used in WEDM, both theoretically and experimentally. To reduce the tension variation of the wire, which directly affects cutting performance, we have designed a simply tension reduction device using springs and rollers. It is shown that tension fluctuation is reduced about 35% using the passive tension controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2513-2515
• /
• 2000

The Hot Strip Mill(HSM) process consists of reheating furnace, roughing mill, finishing mill and coiler. Reheating furnace heats slab and roughing mill, finishing mill produces strip from this slab. The quality of this production mainly depends on finishing mill, which consists of 6 or 7 stands. Between stands a looper is installed for the better material flow. Automatic gage control(AGC), speed control system and looper system, which are connected with each other, are the main control systems for HSM. The low strip tension can make a loop between stands, which can be caused cobble. On the other hand, high strip tension causes thickness and width reduction, which affects the product quality, and can lead to tear the strip, if it is too high. Because of it, a proper strip tension is needed for better material flow: e.g. A good looper control system is substantial for the better production quality. What is handled in this paper is, the looper controller, which is developed to minimize the fluctuation of width of strip by maintaining an appropriate strip tension between stands and to achieve the stability of the looper control system. And its performance compared with a conventional PID controller is also discussed. The difficulties associated with the maintenance of the constant tension are described.