• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.360-363
• /
• 2007

This paper deals with the dynamic tensile characteristics of the steel sheets for structural members of a train. Train accidents occurs rarely but lead to many casualties and economical loss. Therefore the safety of the train becomes important during the train crash. The dynamic tensile characteristics of the steel sheets are indispensable to analyze the structural crashworthiness. Current research reports the stress-strain curves, fracture elongation and strain rate sensitivities evaluated at the various strain rates especially for SUS304L-ST and SUS304L-LT steel sheets. The results include the difference in the dynamic tensile characteristics of both rolling and transverse directions. Dynamic tensile tests were performed at the strain rates ranging from 0.003/sec to 200/sec using High Speed Material Testing Machine. The materials tested in this research shows interesting behavior at the low strain rates. The strain hardening exponent decreases remarkably while the yield strength increases.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.357-360
• /
• 2006

In this study, it was proposed a direct tensile testing machine(DTTM) to be simple and to be applied to High Performance Fiber Reinforced Cementitious Composites(HPFRCCs), and it was examined the tensile properties of HPFRCCs by this machine. As a results, it was confirmed that a direct tensile test of HPFRCCs could be certainly carried out DTTM to be developed in this study. Also, tensile strength and yield strength of HPFRCCs were similar regardless of specimens thickness. And, all specimens revealed the stable strain-hardening behavior and multiple cracking in flexible and tensile loads. But, deviation of strain at ultimate tensile strength increased with the increase of specimen thickness.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.421-424
• /
• 2006

High nitrogen steels (HNS) exhibit both high strength and ductility during tensile deformation. In the present study the Fe-18Cr-14Mn-4Ni-0.9N high nitrogen steel was heat treated at $1000^{\circ}C$ and $1100^{\circ}C$ to produce $Cr_2N$ precipitates in austenite matrix and full austenite microstructures, respectively. Tensile tests of the heat treated specimens were performed at two different strain rates of 0.05/sec and 0.00005/sec. Each tensile curve of the specimens could be well characterized by the the modified Ludwik equation. Plastic deformation of the steel was adequately represented by the four parameters of the modified Ludwik equation. At 0.05/s strain rate, the specimen with the $Cr_2N$ precipitate exhibited higher strength than the full austenite specimen, while the full austenite specimen showed better mechanical properties at 0.00005/s strain rate. It was found that the $Cr_2N$ precipitates influences deformation behavior of the high nitrogen steel significantly.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.439-443
• /
• 2008

We investigate the mechanical behavior of a pre-heat treated steel of ESW95, which is being used for automotive parts including tie-rods to save manufacturing cost and enhance product quality. SCM435 is also investigated to reveal the characteristics of the pre-heat treated steel tested. AFDEX/MAT is used to extract the true stress-strain curve over the large strain with higher accuracy. It has been found that ESW95 has very week strain-hardening behavior which can be negligible compared with SCM435 and that the initial yield strength is quite high and the toughness of ESW95 reaches nearly 75% of SCM435. ESW95 is characterized by the weak strain-hardening behavior and high yield strength that can be lead to minimization of post-processing including heat treatment and straightening. ESW95 and SCM435 are also compared by applying them to ball-stud forging by computer simulation. It is expected that a great deal of change may take place in production as well as in service if the pre-heated steels are adopted.

• Advances in nano research
• /
• 제15권5호
• /
• pp.467-484
• /
• 2023

Despite the significant features of fiber-reinforced cementitious composites (FRCCs), including better mechanical, fractural, and durability performance, their high content of cement has restricted their use in the construction industry. Although ground granulated blast furnace slag (GGBFS) is considered the main supplementary cementitious material, its slow pozzolanic reaction stands against its application. The addition of nano-sized mineral modifiers, including nano-silica (NS), is an alternative to address the drawbacks of using GGBFS. The main object of this empirical and numerical research is to examine the effect of NS on the strain-hardening behavior of cementitious composites; ten mixes were designed, and five levels of NS were considered. This study proposes a new method, using a four-point bending test to assess the use of nano-silica (NS) on the flexural behavior, first cracking strength, fracture energy, and micromechanical parameters including interfacial friction bond strength and maximum bridging stress. Digital image correlation (DIC) was used for monitoring the initiation and propagation of the cracks. In addition, to attain a deep comprehension of fiber/matrix interaction, scanning electron microscope (SEM) analysis was used. It was discovered that using nano-silica (NS) in cementitious materials results in an enhancement in the matrix toughness, which prevents multiple cracking and, therefore, strain-hardening. In addition, adding NS enhanced the interfacial transition zone between matrix and fiber, leading to a higher interfacial friction bond strength, which helps multiple cracking in the composite due to the hydrophobic nature of polypropylene (PP) fibers. The findings of this research provide insight into finding the optimum percent of NS in which both ductility and high tensile strength of the composites would be satisfied. As a concluding remark, a new criterion is proposed, showing that the optimum value of nano-silica is 2%. The findings and proposed method of this study can facilitate the design and utilization of green cementitious composites in structures.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.69-78
• /
• 2022

지오튜브 공법은 해안지역 해안선 침식방지와 준설토 매립 호안사면의 뒤채움 필터석 대체용으로도 널리 활용되고 있다. 본 연구는 지오텍스타일에 의해 보강되어 제작된 공시체를 현장 상태를 고려하여 등방 구속압력 10kPa, 50kPa, 100kPa 이하로 최소화하여 연직응력 재하 시 변형 거동을 파악하였다. 시험결과 공시체의 연직 변형율 7%까지는 구속압(≤100kPa)에 관계없이 지오텍스타일 조직의 이완에 따른 인장력이 발휘되는 초기 Strain Hardening 영향으로 응력-변위 거동은 동일하였다. 변형율 7%이상부터는 구속압력이 작은 공시체는 재하 시 변형이 커서 보강 지오텍스타일의 인장 저항력을 증가시키므로 Strain Hardening에 의해 파괴 시 축차응력은 상대적으로 증가하였다. 파괴 후는 급격하게 Strain Softening에 의해 취성파괴형태를 나타내면서 저하되었다. 이는 일반적인 삼축압축시험에서 셀 압이 증가되면서 전단응력도 크게 증가되는 현상과 다르다. 지오텍스타일 등방구속시험에서는 지오텍스타일의 인장변위가 일차적으로 영향을 받기 때문에 탄성계수를 급격하게 증가시키는 탄성 거동을 나타내고 있다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.95-102
• /
• 2020

이 연구에서는 입경이 큰 골재를 사용하면서 2% 이상의 인장변형률 성능을 나타내는 고연성 PE 섬유보강 시멘트 복합체 개발을 목적으로 골재의 크기와 입도분포에 따른 고연성 섬유보강 시멘트 복합체의 인장거동 특성을 살펴보고자 하였다. 0.6 mm 이하의 입경들로 구성된 규사를 사용한 배합을 기준으로 최대입경 2.36 mm, 4.75 mm, 5.6 mm, 6.7 mm의 강모래 및 강자갈을 사용한 배합을 비교하여 성능평가를 실시하였다. 골재의 입도분포는 수정 A&A 모델에 기반한 최적입도분포곡선에 가깝도록 세분화된 입경별 혼합비율을 조절하였다. 직접인장실험을 통해 구한 인장거동은 모든 배합에서 뚜렷한 인장변형률 경화 거동을 보였다. 골재 입경별 혼합비율을 조절하여 입도분포가 최적곡선에 가깝도록 한 경우에는 모든 배합에서 규사를 사용한 경우보다 높은 인장변형률 성능을 나타내었다. 또한 골재의 최대입경이 커서 입도분포가 넓을수록 높은 인장변형률 성능을 보였으며, 최대입경 5.6 mm, 6.7 mm의 굵은 골재를 포함하는 경우 각각 4.83%와 5.89%의 매우 높은 인장변형률 성능을 나타내었다. 이 연구를 통해 적절한 입도분포 조절을 통해 굵은 골재를 사용하면서도 고연성 섬유보강 시멘트 복합체의 제조가 가능함을 보였다.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.557-565
• /
• 2003

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.819-827
• /
• 2006

The stress-strain relation of aluminum (Al) alloy foam cell wall was evaluated by the instrumented sharp indentation method. The indentation in a few micron ranges was performed on the cell wall of Al-alloy foam having a composition or Al-3wt.%Si-2wt.%Cu-2wt.%Mg as well as its precursor (material prior to foaming). To extract the stress-stram relation in terms of yield stress ${\sigma}_y$, strain hardening exponent n and elastic modulus E, the closed-form dimensionless relationships between load-indentation depth curve and elasto-plastic property were used. The tensile properties of precursor material of Al-alloy foam were also measured independently by uni-axial tensile test. In order to verify the validity of the extracted stress-strain relation, it was compared with the results of tensile test and finite element (FE) analysis. A modified cubic-spherical lattice model was proposed to analyze the compressive behavior of the Al-alloy foam. The material parameters extracted by the instrumented nanoindentation method allowed the model to predict the compressive behavior of the Al-alloy foam accurately.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.207-211
• /
• 2006

This paper presents an experimental study on the repair performance of sprayed engineered cementitious composites(ECC) serving as a repair material. Sprayable ECC, which exhibit tensile strain-hardening behavior in the hardened state and maintain sprayable properties in the fresh state, have been developed by using a parallel control of micromechanical design and rheological process design. The effectiveness of sprayable ECC in providing durable repaired structures was assessed by spraying the ECC and testing them for the assessment. The experimental results revealed that, when sprayed ECC were used as a repair material, both load carrying capacity and ductility represented by the deformation capacity at peak load of the repaired flexural beams were obviously increased compared to those of commercial prepackaged mortar(PM) repaired beams. The significant enhancement in the energy absorption capacity and tight crack width control of the ECC repair system treated with wet-mix spraying process suggests that sprayed ECC can be effective in extending the service life of rehabilitated infrastructures.