• 한국의류학회지
• /
• 제22권4호
• /
• pp.525-534
• /
• 1998

Cotton fabrics were finished with mixture of BTCA(1,2,3,4,-butanetetracarboxylic acid) and polyalkyleneoxide-modified amino-functional silicone by pad-dry-cure process to achieve better DP performance with a higher retention of physical properties as compared to those of finished with BTCA alone. The results indicated that BTCA improved the wrinkle recovery but reduced significantly the tensile and tear strength of the treated fabrics. Whereas silicone imparted a lower wrinkle recovery, a lower loss of tensile strength than BTCA, in addition improved considerably the tear strength owing to reduction in inter-fiber and/or inter-yarn frictional forces. The concentration and curing temperature needed to enhance physical properties were as follows; for BTCA treatments 6%, at 18$0^{\circ}C$, for silicone treatments 1% at 14$0^{\circ}C$. This optimum concentration of silicone was observed by using the mixture of BTCA and silicone. The wrinkle recovery and DP rating of cotton fabrics treated with mixture of 4% BTCA and 1% silicone at a curing temperature of 17$0^{\circ}C$ was similar to those of treated with 6% BTCA at a curing temperature of 18$0^{\circ}C$, and other performance properties observed were; an increase in tensile strength, extension, toughness, abrasion resistance and moisture regain due to the reduction of BTCA concentration and curing temperature, futhermore an improvement in bending and surface properties due to the lubricating effect of silicone. On the other hand 1% aqueous silicone solution showed the lowest surface tension. Such nonionic surface activity resulted in a more uniform and rapid deposition of BTCA on the fiber or fabric.

• Elastomers and Composites
• /
• 제59권1호
• /
• pp.34-41
• /
• 2024

In this study, the effects of the type and content of silica on the mechanical and tear properties of chloroprene rubber (CR), which is mainly used as a jacket material for mining cables, were studied. The crosslinking density (ΔM) and reinforcing factor (α_f) defined using cure characteristics increased with increasing silica content, whereas the cure rate decreased. The hardness, tensile strength, and modulus of the CR compounds increased depending on the silica content and structural development. The reinforcing behavior of the silica-filled CR compounds according to the silica type and content showed the best fit with the Thomas equation of the predictive model. Tear strength was evaluated using two standard test methods, ASTM D470 and DIN VDE 0472-613, and the results were compared. The tear strength increased as the silica content increased, regardless of the test method, and the different tear strengths obtained by the two standard test methods showed a linear relationship with each other, indicating a high correlation.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.330-343
• /
• 1997

Extraoral maxillofacial prostheses are essential for restoring facial structures that are lost as a result of congenital missing, injuries from accidents, surgical treatments of head and neck cancer. Recently, silicone is the most useful material for this purpose and is more advantageous than other maxillofacial prosthetic materials. However, there are some problems for long-term usage of silicone prostheses due to tear and color change. These are major contributing environmental factors to those problems that are such as ultraviolet light, cleansing agents, changes in humidity and successive adhesion and removal. The aim of this study is to evaluate the physical properties and color changes of maxillofacial prosthetic silicone material by those environmental factors using A-2186 silicone material (Factor II, USA) and two pigments, cadmium yellow medium and cosmetic red. Aluminium molds were fabricated according to the ASTM No. D412 & D624 specifications and resulted specimens from molds were fabicated and treated as follows. Control group and experimental I group were fabricated with 0.1% wt. pigment mixing in silicone elastomer and II-1 group, II-2 group of experimental II group were fabricated with 0.2%, 0.3% wt. pigment mixing in silicone elastomer, respectively. Control group was kept in darkroom at room temperature, I-1 group was kept under natural sunlight during 1week, I-2 group was soaked in 20% soap water during 1wk. I-3 group was successively adhered and removed 200 times on inner region of arm using Daro adhesive-33. Experimental II groups were kept in darkroom at room temperature. Instron universal testing machine was used to measure the % elongation, tensile strength, tear strength of control, experimental I, II groups and reflectance spectrophotometer(COLOR EYE-3000, Macbeth, USA) was used to measure the color differences between control group and experimental I group. The results were as follows : 1. When compared with control group, natural weathering group and 20% soap-water soaking group had no significant differences in % elongation(p>0.05). 2. 200 times successive adhesion and removal group, 0.2% wt. pigment group and 0.3% wt. pigment group had significant decreases in % elongation(p<0.05). 3. Natural weathering group, 20% soap-water soaking group and 200 times successive adhesion and removal group had no significant differences in tensile strength (p>0.05). 4. 0.2%, 0.3% wt. pigment groups had significant decreases in tensile strength(p<0.05). 5. Values of all experimental groups were decreased in tear strength. and 200 times successive adhesion and removal group had significant decrease in tear strength(p<0.05). 6. Natural weathering group and 20% soap-water soaking group had significant color differences(${\Delta}E$) and it could be detectable to naked eye(p<0.05). 7. Color differences between control group and 200 times adhesion and removal group were not detectable to the naked eye (${\Delta}E<1.0$).

• Elastomers and Composites
• /
• 제5권1호
• /
• pp.69-74
• /
• 1970

The influence of various calcium carbonate on the physical properties of natural rubber have teen carries out extensive experiments on compounding. Final evaluation was made through various kinds of physical test-tensile strength, modulus, tear strength and hardnees-including particle size. The results are as follows: 1. Generally, tile tensile strength, modulus and tear strength showed the similar tendency in various calcium carbonate compounding. 2. The maximum volume of general using have been obtained with 150 phr calcium carbonate in $NR-CaCO_3$ compounding. 3. The particle size of domestic calcium carbonate showed $1.0\mu-2.6\mu$.

• 한국의류학회지
• /
• 제31권8호
• /
• pp.1286-1296
• /
• 2007

Hanji, the korean traditional papers were mostly made from mulberry paper. But the production and demand of hanji have decreased rapidly because mulberry paper yields were insufficient and handworked hanji procedures were complicated. Recently, the researches on hanji were carried out to improve the properties of hanji. Kenaf fibers have been interested as a substitute resource of mulberry paper for hanji production. In this research, Kenai pulps were manufactured with removal methods of lignin or hemicellulose from kenaf fibers and paper mulberry pulps with traditional alkali methods. Kenaf papers, paper mulberry, and kenaf/paper mulberry mixed papers were manufactured with their pulps. The crystallinity, fiber length, color of the pulps and tensile strength, tear strength, water absorption of the papers were investigated. The results were as follow: The removal rates of lignin of chemical retted kenaf fibers with sodium chlorite reaction for 40 minutes were 70% and were higher than 40% of double retted fibers. Paper mulberry pulps has less lignin and hemicellulose than kenaf differently. The crystallinity of paper mulberry pulps were very low with 60%, but kenaf pulps were 90%. The chemical retted CR-40-1 pulps were similar with paper mulberry pulps on fiber length & fibrilation of fibers. Tensile strength of paper mulberry were higher than kenaf papers because of fibrilation of paper mulberry, but tear strength were lower. Tensile strength and tear strength were improved on kenaf/paper mulberry 30/70 mixed papers.

• 펄프종이기술
• /
• 제35권1호
• /
• pp.1-6
• /
• 2003

This study was carried out to investigate the effect of internal fibrillation on the pulp and paper properties. The internal fibrillation was introduced into the SwBKP and recycled SwBKP by the mechanical treatment with Hobart mixer. WRV and physical properties of SwBKP were improved by the internal fibrillation. However the mechanical treatment of recycled SwBKP resulted in the decrease of strength properties of paper except for the tear index, although it was observed that WRV was somewhat increased by the mechanical treatment. The decrease of strength properties of recycled SwBKP might be caused by the hornification of fiber and the decrease of fiber strength.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.35-43
• /
• 2001

Both tensile and tear properties of short-fiber reinforced Chloroprene rubber have been studied as functions of the fiber aspect ratio and fiber content. Both properties increased when both the fiber aspect ratio and fiber content were increased. The fiber reinforced rubbers exhibited maximum values of these properties at a fiber aspect ratio of about 300. When the fiber aspect ratio exceeds 400, the mechanical properties decreased with the fiber content because of the non-uniform dispersion of fibers. The tensile modulus was compared with the prediction by the Halpin-Tsai equations for randomly oriented cases. A bonding agent was used in the fiber treating process. It was found that the ultimate tensile strength, torque, tearing energy and tensile modulus of the rubbers with treated fibers were much higher than those with untreated ones.

• 한국염색가공학회지
• /
• 제5권3호
• /
• pp.188-193
• /
• 1993

Aqueous polyurethanes(APU) were prepared from polypropylene glycol(PPG), dimethylol propionic acid(DMPA), and isophoron diisocyanate(IPDI) following a prepolymer mixing process. APUs were applied as binder for nonwoven fabrics processing. APU treated nonwoven fabrics generally showed better tear and tensile strength as compared with the untreated ones. In addition, depending on the soft segment length and crosslinking density of the PU, tear strength of APU treated fabrics was favorably compared with solvent type treated one. Similar results were obtained with microfiber nonwoven fabrics, however, the effect was less significant.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.96-102
• /
• 2007

Antibacterial finishing of nylon 66 fabrics was carried out with sericite and medilite which are a cheap price antibacterial agents and had excellent antibacterial effects. The particle size of sericite and medilite was 15 ${\mu}m$ and 30 ${\mu}m$. The antibacterial and deodorant ratio, tensile and tear strength, peel strength were examined to investigate the change of physical properties and antibacterial effect. The results are as follows. 1. Peel strength is increased with increasing adhesive content, and satisfied standard value of peel strength when adhesive content is 20 $g/m^2$. Also peel strength was decreased with increasing antibacterial agent content and particle size in the adhesives. 2. Tensile and tear strength were not related with antibacterial agent content in the adhesives. 3. Laundering nylon 66 fabric treated with antibacterial agent, the optimum content satisfying Korean Standard(KS) is 8%. The antibacterial and deodorant ratio were not affected by several types of adhesives.

• 접착 및 계면
• /
• 제7권3호
• /
• pp.26-33
• /
• 2006

나일론 직물들이 전류세기 5, 10, 15, 20 A, 공급속도 5, 10, 15 m/min로 코로나 처리되었다. 나일론 직물의 표면변화를 X-ray 회절장치, 주사전자현미경(SEM)과 X-ray 광전자분석기(ESCALAB)로 확인하였다. 또한 물리적 성질의 변화를 인장 인열강도, 접착 및 습윤강도를 통하여 측정하였다. 접착에 사용된 접착제는 열경화성 반응형 폴리우레탄 핫 멜트 접착제이다. 대기압에서 코로나 방전처리에 의해 나일론 직물에 관능기들이 도입되어졌고, 그 결과 접착력은 향상되었다. 코로나 처리된 나일론 직물의 접착강도는 전류 세기가 증가할수록, 공급속도가 감소할수록 증가하였다.