• 제목/요약/키워드: tenon joint

검색결과 22건 처리시간 0.017초

조선시대 영남지방 별당과 정자건축의 '창얼굴' 형식 및 변천에 관한 연구 -온돌방과 대청 주위 쌍창을 중심으로- (A Study on the Forms and Modifications of 'Chang-aelgool'(窓乻骨) in Annex and Pavillion Buildings in Yeong-nam Region during the Chosun Dynasty - Focused on 'Ondol' Rooms and 'Ssang-chang' around the Main Floored Room -)

  • 박일찬;이호열
    • 건축역사연구
    • /
    • 제21권3호
    • /
    • pp.73-92
    • /
    • 2012
  • This study mainly inquired characteristics and changes of 'Chang-aelgool' through 38 cases(with 161 Ssang-chang) of annex and pavillion buildings in Yeong-nam region which are built during the Chosun dynasty. The method of inquiry included actual survey of windows along with bibliographical research, and the results are as below. First, through the discovery of the term 'Chang-aelgool' as an indication of the window-forming frame in 'YeongGeonUiGwe'(1680 A.D), it is apparent that the term 'Chang-aelgool' was widely used in Korea from the late 17th century. Second, the 'Chang-aelgool' of study objects are classified into 4 categories. Type I and II are comprised of mitre-joints which cover the 4 corners of 'Chang-aelgool' and mainly used in building annex and pavillion buildings during the early period of the Chosun dynasty. Type III was widely used during the early and middle period of the Chosun dynasty and drastically dropped in number during the late period of the dynasty. Type IV is comprised of mitre-joint of the upper-half, tenon-jointing of the lower-half and widely used in annex and pavillion building during the late period of the Chosun dynasty. Third, the form of 'Chang-aelgool' has changed from rectangular form with longer width during the early period of Chosun dynasty to square form during the middle period and eventually ended up as a rectangular form with longer height during the late period of the dynasty. Fourth, it is considered that while mullion which is located in the center of 'Chang-aelgool' was mainly used around the main floored room during the early period of the Chosun dynasty, became commonly used in main floored room and 'ondol' rooms during the middle period and drastically dropped in number from then and ended up being not in use after the mid 18th century.

회전근 개 파열의 봉합에서 UU 봉합법은 변형된 MA(Mason-Allen) 봉합법을 대치할 수 있는가? - UU 봉합법과 변형된 MA 봉합법의 생역학적 비교- (Is the UU Stitch Really Alternative to Modified MA (Mason-Allen) Stitch for Rotator Cuff Repair? - Biomechanical Comparative Study of UU to Modified MA Stitch -)

  • ;고상훈;박기봉;전형민;김태원;임현우;염영진
    • Clinics in Shoulder and Elbow
    • /
    • 제12권2호
    • /
    • pp.207-214
    • /
    • 2009
  • 목적: 관절경 하 회전근 개 봉합에서 일반적으로 건-봉합간 접촉면 (tenon-suture interface) 에 약한부위 (weak link)가 형성되어 있어 관절경 하 회전근 개 봉합은 개방적 봉합술보다 높은 재파열율을 가진다. 이 연구의 목적은 봉합사를 뼈에 고정할 때 관절경으로 사용할 수 있는 UU (Ulsan University) 봉합과 개방적 변형 MA (Mason-Allen) 봉합의 강도를 비교하는 것이다. 대상 및 방법: 한 구의 사체 극상근 건을 채취하여 절반으로 나눈 후 다시 절반을 나누어 사체의 어깨 관절 한 구당 네 개의 건을 만들어 총 24개의 검체를 만들었다. 두 봉합 형태 (UU, MA)는 무작위로 선택하였으며 각각의 건에 시행하였다. 검체는 0.25 Hz에서 5~30N의 조절된 외력하에서 50회 주기 부하 (cyclic loading)를 받았다. 각 검체는 초당 1mm의 전이가 되는 상황하에서 파열이 발생할 때(ultimate tensile load)까지 부하를 받았다. 조건 이완 (condition elongation), peak-to-peak 전이(displacement), 기울기 (stiffness), 최대 인장력 (ultimate tensile load), 파열 양상 (mode of failure) 등을 기록하였다. 결과: 주기 부하 실험에서 두 봉합 형태 간 유의 있는 차이는 없었다. 최대 장력 실험에서 UU 봉합과 변형 MA (Mason-Allen) 봉합 간에 통계학적으로 유의한 차이는 없었다 (109.4 N, and 110.6 N). 양 봉합 형태에서 가장 흔한 파열 양상은 봉합의 빠짐 (suture pull-out)이었다. 결론: UU 봉합과 변형 MA 봉합은 유사한 생역학적 특성을 가진다.