• 한국전산구조공학회논문집
• /
• 제23권3호
• /
• pp.303-314
• /
• 2010

이 논문에서는 외부강선으로 긴장된 PSC 거더의 비선형 해석방법에 대한 연구를 수행하였다. 외부강선은 정착부와 편향부에서만 부재와 일체로 거동을 하고 정착부-편향부, 편향부-편향부 사이에서 독립적인 거동을 보이는 특성으로 인해 구조물의 처짐이 증가할 경우 부재와 외부강선의 편심량이 감소하여 모멘트가 변화하는 2차 효과(secondary effect)가 발생한다. 또한 편향부에서 외부강선의 인장력 차이로 인해 슬립(slip)이 발생할 경우 외부강선의 인장력이 재분배되어 복잡한 비선형 거동을 보이게 된다. 이 논문에서는 정착부-편향부, 편향부-편향부 사이의 외부강선을 여러 개의 곡선요소로 모사하고, 편향부에서의 마찰력과 driving force(미끄러지는 힘)의 평형관계를 이용하여 외부강선의 인장력을 재분배함으로써 편향부에서의 슬립효과를 고려하였다. 이 논문에서 제시한 외부강선의 유한요소모델과 해석방법을 저자들이 개발한 시공단계를 고려한 PSC 뼈대의 비선형 해석 프로그램에 통합하고, 외부강선으로 긴장된 PSC 보의 해석에 적용하여 외부강선에 대한 유한요소모델 및 해석방법의 정당성과 적용성을 확인하였다. 또한 편향부의 수와 편향부에서의 마찰계수에 따른 극한거동을 검토해본 결과, 편향부의 수가 증가할수록 PSC 보의 항복하중과 극한하중은 증가하였으며, 편향부에서의 마찰계수에 따른 극한거동은 외부강선과 편향부 사이의 마찰력으로 인해 부재에 전달되는 모멘트의 영향에 따라 마찰계수가 적정한 값일 경우에 극한내력이 최대치를 보이는 것을 확인하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.1389-1390
• /
• 2004

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.7-17
• /
• 2002

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.368-373
• /
• 2008

This paper describes the dynamic shock effects on the pretensioned concrete member by the detensioning using finite element analysis. The investigation was performed by linear and nonlinear dynamic analysis. In nonlinear dynamic analysis, Brittle Cracking Model was applied for concrete behavior. It was shown that the amplitude of stress wave was significantly decreased when time for cutting of tendon was above 0.05sec. The maximum stress values obtained from linear and nonlinear dynamic analysis was nearly same. However, the position forthe maximum tensile stresses were different.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.827-832
• /
• 2001

A multi-level optimum design algorithm for prestressed concrete (PSC) box girders is proposed in this paper. To save the numerical efforts, a multi-level optimization technique using model coordination method that separately utilizes both tendon profile design and section design is incorporated. And also, a reduced basis technique for the efficient tendon profile optimization is proposed in this paper. From the numerical investigations, it may be positively stated that the optimum design of PSC box girder based on the new approach proposed in this study will lead to more rational and economical design compared with the currently available designs.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.758-761
• /
• 2004

Prestressing tendons of the nuclear containment building dome are arranged in a non-axisymmetric manner. However, simple axisymmetric modeling of the containment building is often employed to estimate the structural behavior for, e.g. the ultimate pressure, which requires the axisymmetric approximation of the actual tendon arrangements of the dome. A procedure is proposed that can devise the actual 3-dimensional tendon stiffness and prestressing effect into the axisymmetric model. A numerical example of the CANDU type is presented to verify the procedure and to estimate the amount of approximation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.178-181
• /
• 2006

The purpose of this study is to investigate the inelastic behavior of precast segmental prestressed concrete bridge piers. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. An unbonded tendon element based on the finite element method, that can represent the interaction between tendon and concrete of prestressed concrete member, is used. A joint element is newly developed to predict the inelastic behaviors of segmental joints. The proposed numerical method for the inelastic behavior of precast segmental prestressed concrete bridge piers is verified by comparison with reliable experimental results.

• 비파괴검사학회지
• /
• 제31권6호
• /
• pp.616-625
• /
• 2011

Ensuring the designed prestress force is very important for the safety of prestressed concrete bridge. The loss of prestress force in tendon could significantly reduce load carrying capacity of the structure. In this study, an automated prestress-loss monitoring system for prestressed concrete girder using PZT-interface and wireless impedance sensor node is presented. The following approaches are carried out to achieve the objective. Firstly, wireless impedance sensor nodes are designed for automated impedance-based monitoring technique. The sensor node is mounted on the high-performance Imote2 sensor platform to fulfill high operating speed, low power requirement and large storage memory. Secondly, a smart PZT-interface designed for monitoring prestress force is described. A linear regression model is established to predict prestress-loss. Finally, a system of the PZT-interface interacted with the wireless sensor node is evaluated from a lab-scale tendon-anchorage connection of a prestressed concrete girder.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.81-84
• /
• 2004

Prestressing tendons in a nuclear containment building dome are non-axisymmetrically arranged in most cases. However, simple axisymmetric modeling of the containment has been often employed in practice, which requires the axisymmetric approximation of the actual tendon arrangements in the dome. A procedure was previously proposed that can implement the actual 3D tendon stiffness and prestressing effect into the axisymmetric model for CANDU type. This paper further verifies and compares some methodologies adopted in the proposed scheme through some numerical examples.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.292-299
• /
• 2006

The purpose of this study is to investigate the inelastic behavior of precast segmental prestressed concrete bridge columns. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures was used. Material nonlinearity is taken into account by comprising tensile, compressive and shear models of cracked concrete and a model of reinforcing steel. An unbonded tendon element based on the finite element method, that can represent the interaction between tendon and concrete of prestressed concrete member, is used. A joint element is newly developed to predict the inelastic behaviors of segmental joints. The proposed numerical method for the inelastic behavior of precast segmental prestressed concrete bridge columns is verified by comparison with reliable experimental results.