• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권1호
• /
• pp.91-96
• /
• 2007

법랑질 형성부전증은 전치부 개교합과 같은 골격적인 문제를 자주 동반하며, 이러한 경우 구강악안면외과, 보철과, 보존과, 교정과 의사들이 함께 치료하여야 한다. 본 증례는 법랑질의 약화와 치아 우식증 등의 이유로 일반적인 교정치료를 시행할 수 없어 보철적 방법으로 치료하였다. 보존적, 보철적 방법을 이용하여 술전 교정과 같은 안정된 교합을 형성하였다. 악교정 수술을 시행하고 SAS 등을 이용하여 악간고정을 시행하여 양호한 결과를 얻을 수 있었다.

• 한국환경복원기술학회지
• /
• 제19권3호
• /
• pp.103-119
• /
• 2016

This study aims to assess habitat feature on the large-scale spawning ground of the Boreal Digging Frog Kaloula borealis in Daemyung retarding basin of Daegu, and to analyze the relationships between species abundance and meteorological factors for each habitat. Fifty-seven(57) pitfalls were installed to collect species abundance of 4 survey regions, and high-resolution satellite image, soil sampling equipment, digital topographic map, and GPS were used to develop habitat features such as terrain, soil, vegetation, human disturbance. The analysis shows that the frog is most abundant in sloped region with densely herbaceous cover in southern part of the retarding basin. In the breeding season, lowland regions, where Phragmites communis and P. japonica dominant wetlands and temporary ponds distributed, are heavily concentrated by the species for spawning and foraging. Located in between legally protected Dalsung wetands and lowland regions of the retarding basin, riverine natural levee is ecologically important area as core habitat for Kaloula borealis, and high number of individuals were detected both breeding and non-breeding seasons. Temperate- and pressure-related meteorological elements are selected as statistically significant variables in species abundance of non-breeding season in lowland and highland regions. However, in sloped regions, only a few variables are statistically significant during non-breeding season. Moreover, breeding activities in sloped regions are statistically significant with minimum temperature, grass minimum temperature, dew point temperature, and vapor pressure. Significant meteorological factors with habitat features are effectively applied to establish species conservation strategy of the retarding basin and to construct for avoiding massive road-kills on neighboring roads of the study sites, particularly post-breeding movements from spawning to burrowing areas.

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.144-151
• /
• 2021

PURPOSE. The purpose of this in vitro study was to investigate the wear resistance and surface roughness of three interim resin materials, which were subjected to chewing simulation. MATERIALS AND METHODS. Three interim resin materials were evaluated: (1) three-dimensional (3D) printed (digital light processing type), (2) computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and (3) conventional polymethyl methacrylate interim resin materials. A total of 48 substrate specimens were prepared. The specimens were divided into two subgroups and subjected to 30,000 or 60,000 cycles of chewing simulation (n = 8). The wear volume loss and surface roughness of the materials were compared. Statistical analysis was performed using one-way analysis of variance and Tukey's post-hoc test (α=.05). RESULTS. The mean ± standard deviation values of wear volume loss (in mm³) against the metal abrader after 60,000 cycles were 0.10 ± 0.01 for the 3D printed resin, 0.21 ± 0.02 for the milled resin, and 0.44 ± 0.01 for the conventional resin. Statistically significant differences among volume losses were found in the order of 3D printed, milled, and conventional interim materials (P<.001). After 60,000 cycles of simulated chewing, the mean surface roughness (Ra; ㎛) values for 3D printed, milled, and conventional materials were 0.59 ± 0.06, 1.27 ± 0.49, and 1.64 ± 0.44, respectively. A significant difference was found in the Ra value between 3D printed and conventional materials (P=.01). CONCLUSION. The interim restorative materials for additive and subtractive manufacturing digital technologies exhibited less wear volume loss than the conventional interim resin. The 3D printed interim restorative material showed a smoother surface than the conventional interim material after simulated chewing.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.82-94
• /
• 2024

본 증례는 치아의 전반적 마모를 보이며 구치부 지지가 소실된 환자를 대상으로 전악 수복을 진행한 증례이다. 측두 하악 관절의 상태를 분석 후, 붕괴된 교합을 회복하기 위해 다수의 임플란트가 식립되었다. 고정체/지대주 수준의 인상 채득에서, 교차 마운팅을 위한 여러 번의 복잡한 교합 기록을 동반하는 전통적 인상 채득 방법 대신 구강 스캐너를 이용한 방식을 채득하였다. 하악의 불안정한 움직임을 반영하기 위해, '하악 운동 추적(jaw motion tracking)'장치와 '디지털 안궁 이전(digital face-bow transfer)'을 이용하였고, 이차 임시 수복물을 기반으로 하여 최종 수복물로 복제하는 '이중 스캔 기법(double scan technique)'으로 최종 수복물을 제작하였다. 위와 같은 디지털 기술을 이용하여 불안정한 교합을 갖는 환자에게 보다 짧은 체어 타임으로 완전 구강 회복을 진행할 수 있다.

• The Journal of Advanced Prosthodontics
• /
• 제16권4호
• /
• pp.231-243
• /
• 2024

PURPOSE. The objective of the study was to analyze the impact of cement, bonding pretreatment, and ceramic abutment material on the overall color results of CAD-CAM ceramic crowns bonded to titanium-based hybrid abutments. MATERIALS AND METHODS. For single implant restoration of a maxillary lateral incisor a total of 51 CAD-CAM-fabricated monolithic lithium disilicate crowns were fabricated and subsequently bonded onto 24 lithium disilicate Ti-base abutments, 24 zirconia Ti-base abutments and 3 resin abutment replicas as a control group. The 48 copings were cemented with three definitive and one provisional cement on both grit-blasted and non-blasted Ti-bases. The color of each restoration and surrounding artificial gingiva was measured spectrophotometrically at predefined measuring points and the CIELAB (ΔE_ab) color scale values were recorded. RESULTS. The color outcome of ceramic crowns bonded to hybrid abutments and soft tissues was affected differently by cements of different brands. Grit-blasting of Ti-bases prior to cementing CAD-CAM copings affected the color results of allceramic crowns. There was a significant difference (P = .038) for the median ΔE value between blasted and non-blasted reconstructions at the cervical aspect of the crown. Full-ceramic crowns on zirconia Ti-base abutments exhibited significantly lower ΔE values below the threshold of visibility (ΔE 1.8). In all subcategories tested, the use of a highly opaque temporary cement demonstrated the lowest median ΔE for both the crown and the artificial gingiva. CONCLUSION. Various cements, core ceramic materials and airborne particle abrasion prior to bonding can adversely affect the color of Ti-base supported ceramic crowns and peri-implant soft tissue. However, zirconia CAD-CAM copings and an opaque cement can effectively mask this darkening.

• 한국농공학회논문집
• /
• 제60권5호
• /
• pp.115-124
• /
• 2018

Resilience has been widely used in various fields including design and operation of infrastructures. The resilient infrastructures not only reduce the damage scale of various disasters but also reduce the time and cost required for restoration. However, resilience rarely applied to promote efficient management of agricultural infrastructures. Recently, drought is an aggravating disaster by climate change and need countermeasures. Therefore, we tried to demonstrate evaluating measures in case of drought under consideration of resilience. This study applied the robustness-cost index (RCI) to evaluate alternative solution of the supply problem of a large agricultural reservoir under drought conditions. Four structural alternatives were selected to estimate the robustness index (RI) and the cost index (CI) to obtain the RCI values. Structural alternatives are classified into temporary measures and permanent measures. Temporary measures include the development of a tube wells and the installation of the portable pump, while the permanent measures include the installation of a pumping stations and the pumping water to the reservoir (Yeongsan River-Naju reservoir). RCI values were higher in permanent measures than those of temporary measures. Initial storage of the reservoir also affected RCI values of the drought measures. Permanent measures installation and management of early stage of the reservoir storage shortage was identified as the most resilient system.

• 대한두개안면성형외과학회지
• /
• 제20권6호
• /
• pp.347-353
• /
• 2019

Most orbital surgeons believe that it's difficult to restore the primary orbital wall to its previous position and that the orbital wall is so thin that cannot be firmly its primary position. Therefore, orbital wall fractures generally have been reconstructed by replacing the bony defect with a synthetic implant. Although synthetic implants have sufficient strength to maintain their shape and position in the orbital cavity, replacement surgery has some drawbacks due to the residual permanent implants. In previous studies, the author has reported an orbital wall restoring technique in which the primary orbital wall fragment was restored to its prior position through a combination of the transorbital and transantral approaches. Simple straight and curved elevators were introduced transnasally to restore the orbital wall and to maintain temporary extraorbital support in the maxillary and ethmoid sinus. A transconjunctival approach provided sufficient space for implant insertion, while the transnasal approach enabled restoration of the herniated soft tissue back into the orbit. Fracture defect was reduced by restoring the primary orbital wall fragment to its primary position, making it possible to use relatively small size implant, furthermore, extraorbital support from both sinuses decreased the incidence of implant displacement. The author could recreate a natural shape of the orbit with the patient's own orbital bone fragments with this dual approach and effectively restored the orbital volume and shape. This procedure has the advantages for retrieving the orbital contents and restoring the primary orbital wall to its prior position.

• 구강회복응용과학지
• /
• 제25권1호
• /
• pp.23-29
• /
• 2009

1933년 Dewey와 Zugsmith가 처음 ovate pontic을 소개한 이후 1990년대 말부터 임상적으로 널리 사용되고 있다. Ovate pontic은 심미적이고 위생적인 자연치의 emergence profile을 더 정교하게 재현할 수 있는 방법으로 알려져 있다. 특히, 상악 전치부가 상실된 경우 발치 시기부터 ovate pontic의 형태를 가진 레진 임시수복물을 제작해 줌으로서 치간유두를 보존시켜 치간공극의 발생을 최소화하여 심미적이고 발음의 이상이 없는 최종보철물을 제작할 수 있다. 본 증례에서는 치아상실부위에서 치간유두의 상실을 최소화하고 자연치와 유사한 emergence profile을 지닌 보철물을 제작하기위해 ovate pontic을 이용하여 처치한 치험예를 문헌고찰과 함께 보고하고자 한다.

• 대한심미치과학회지
• /
• 제26권1호
• /
• pp.24-38
• /
• 2017

치과 임상에서 보철 과정은 1) 치아 삭제 2) 임시 수복물 제작 3) 포스트와 코어 4) 인상채득 5) 최종 보철물 합착의 순서로 진행된다. 보철 과정의 마지막이 정확한 적합과 교합 관계를 갖는 최종 보철물을 환자의 지대치의 적합시키는 과정이다. 그런데, 이 최종 보철물은 진료실에서 만들어지는 것이 아니라, 치과 기공실에서 만들어져서 약간의 시간차를 두고 진료실로 오게 된다. 진료실에서 환자의 구강 내 정보를 기공실로 전달하는 유일한 매체는 인상체이다. 그런데 이 과정에서 수 많은 오차가 발생된다. 치과 의사와 치과 기공사는 이 오차를 줄이기 위해 원인을 파악하고 정확한 보철물 제작을 위해 노력해야 한다.

• 대한치과보철학회지
• /
• 제56권3호
• /
• pp.212-217
• /
• 2018

목적: 본 연구의 목적은 구치부 식립 임플란트에서 지대주 나사 풀림의 발생 빈도 및 지대주 나사 풀림에 영향을 주는 다양한 요인들을 후향적 연구를 통하여 평가하는 것이다. 대상 및 방법: 2013년 1월부터 2016년 1월까지 208명의 환자에서 구치부에 식립한 391개의 임플란트를 대상으로 하였다. 모든 수복물은 고정성으로 단일 혹은 연결 크라운, 브릿지로 제작되었으며, 임시 시멘트로 합착하였다. 전체 수복물 중 지대주 나사 풀림의 발생 빈도를 조사하였고, 성별, 보철물의 위치, 대합치, 보철물의 유형, 지대주 연결 유형, 매식체의 지름이 지대주 나사 풀림에 미치는 영향을 평가하였다. 결과: 2 - 5년의 관찰 결과, 총 29개(7.4%)의 임플란트에서 지대주 나사 풀림이 발생하였다. 최종 수복 후 지대주 나사 풀림이 발생하기까지 소요된 기간은 3개월부터 48개월(평균19.5개월)까지 다양하게 나타났으며, 이 중 3개의 임플란트에서 매식체의 파절이 발생되었다. 고려 요인들 중, 임플란트의 식립 위치에 따라 대구치(9.4%)와 소구치(2.6%)에서 통계적으로 유의한 차이를 보였으며(P < .019), 대합치에 따라 자연치(9.9%), 임플란트(1.0%), 가철성 보철물(0%)에서 유의한 차이를 보였다(P < .018). 다른 고려 요인에 따른 지대주 나사 풀림 발생 빈도는 통계적 유의성이 없었다. 결론: 구치부 임플란트 수복물에서 지대주 나사 풀림의 발생 빈도는 7.4%로 나타났다. 소구치보다 대구치에서 유의하게 높은 발생 빈도를 보였으며, 대합치에 따라서는 임플란트, 가철성 보철물과 비교 시 자연치에서 유의하게 높은 발생 빈도를 보였다.