• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.283-286
• /
• 2012

(1-X)$(Na_{0.5}K_{0.5})NbO_3-XK_{5.4}Cu_{1.3}Ta_{10}O_{29}$ (NKN-KCT) lead-free piezoelectric ceramics have been synthesized by the conventional solid state sintering method, and their sinterability and piezoelectric properties were investigated. Typically, this material is sintered between 1,025 and $1,100^{\circ}C$ for 2 hours to achieve the required densification. Crystalline structures and Microstructures were analyzed by X-ray diffraction and scanning electron microscope. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCT content and the sintering temperature. In particular, the KCT addition to NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 1.0 mol% sintered at $1,050^{\circ}C$ exhibited optimum properties (${\varepsilon}_r$=246, $d_{33}$=95, $k_p$=0.38 and $Q_m$=1,826). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• Journal of Welding and Joining
• /
• 제15권5호
• /
• pp.134-143
• /
• 1997

The formation of thick alloyed layer with high Si content have been investigated on the surface of Al alloy (A5083) plate by PTA process with Si powder. Hardening characteristics and wear resistance of alloyed layer was examined in relation to the microstructure of alloyed layer. Thick hardened layer in mm-order thickness on the surface of A5083 plate can be formed by PTA process with wide range of process condition by using Si powder as alloying element because of eutectic reaction of Al-Si binary alloy. High temperature and rapid solidification rate of molten pool, which are features of PTA process, enable the formation of high Si content alloyed layer with uniform distribution of fine primary Si paticle. High plasma arc current was beneficial to make the alloyed layer with smooth surface appearance in wide range of powder feeding rate, because enough volume of molten pool was necessary make alloyed layer. Uniform dispersion of fine primary Si particle with about 30${\mu}{\textrm}{m}$ in particle size can be obtained in layer with Si content ranging from 30 to 50 mass %. Hardness of alloyed layer increased with increasing Si content, but increasing rate of hardness differed with macrostructure of alloyed layer. Wear resistance of alloyed layer depended on $V_{si}$(volume fraction of primary Si) and was remarkably improved to two times of base metal at 20-30% $V_{si}$ without cracking, but no more improvement was obtained at larger $V_{si}$.

• 한국지리정보학회지
• /
• 제6권3호
• /
• pp.139-150
• /
• 2003

한국 연근해역의 중규모 해양 환경변동이 Cochlodinium polykrikoides 적조의 시공간 분포 변동과 밀접한 관련성이 있는 것으로 나타났다. 매년 하계 한국 연안역에서 적조가 최초로 발생한 전남 고흥 나로도 연안의 해양환경 상태는 최근 7년(1995~2001) 동안 열염전선대에 위치하였다. 대규모 적조발생은 7년 동안 매 홀수해(1995, 1997, 1999, 2001)에 나타났는데 동중국해 북부해역에서 표면 수온 및 염분의 큰 변동 또한 격년 주기로 나타났다. 저온 고염(홀수해), 고온 저염(짝수해)의 중규모적 해황 변동에 따라 적조의 공간분포 규모가 크게 변동되는 것으로 추정되었다. 한편, 동해연안으로 유입 확산되는 C. polykrikoides 적조의 분포와 이동상황은 동해남부 연안에서 발생하는 냉수대의 시공간 변동 규모에 따라 다르게 나타났다.

• 한국세라믹학회지
• /
• 제44권11호
• /
• pp.613-617
• /
• 2007

The variations of physical and dielectric properties of low temperature dielectrics based on typical aluminoborosilicate glasses modified with several divalent oxides were investigated. The divalent oxides studied here included CaO, MgO, BaO, SrO and ZnO. All samples containing either 35 wt% or 45 wt% alumina filler were prepared at the same processing condition and then fired at $850^{\circ}C$ for 30 min. The resultant characteristics of fired samples depended on the choice of the divalent ion and the content of the alumina filler. Except for the ZnO modification, all other samples containing 35 wt% filler demonstrated promising densification as they exhibited reasonably high densities of 3.07-3.31 $g/cm^3$ and high shrinkages of 14.0-16.4%. Particularly, the sample containing ZnO was distinguished with large variations compared to the base sample, which can be highlighted with earlier densification and crystallization at unexpectedly low temperatures. The negative effects of the ZnO modification on densification and dielectric properties were thought to be associated with earlier crystallization potentially by influencing effective densification via viscous flow. As an optimum composition, the sample containing only CaO showed the most promising characteristics such as $k{\sim}8.05$ and $tan{\delta}{\sim}0.0018$ when 35 wt% alumina filler was used.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.467-473
• /
• 2015

낙동강 하구역 조간대의 보존 및 관리를 위한 기초적 연구로, 낙동강 하구 조간대를 대상으로 지하수의 물리적 특성 및 퇴적물의 성상을 조사하였다. 조간대의 지하수위 및 지하수온의 변화는 조석에 영향을 받으며, $5,000m^3/s$ 이상의 하천수 방류는 조간대의 지하수위를 상승시킬 뿐만 아니라 지반 내 수십 cm 깊이의 지하수 염분을 감소시키는 것으로 조사되었다. 간조 시 조간대 지하수위의 하강 형태는 조간대 퇴적물의 세립질 함량에 따른 투수도 차이에 영향을 받는 것으로 나타났다. 또한 높은 투수도의 조간대 지반에서는 활발한 지하수 흐름에 의해 세립질의 퇴적이 감소하고 재부상이 증가하여 결과적으로는 낮은 세립질 함량의 조간대 지반을 형성하였다.

• 대한기계학회논문집B
• /
• 제34권12호
• /
• pp.1111-1119
• /
• 2010

본 연구에서는 내경 5.0mm 원관을 납작하게 한 납작관에 대하여 R-410A 를 사용하여 응축열전달 실험을 수행하였다. 실험은 포화온도와 열유속을 각각 $45^{\circ}C$ 와 10kW/$m^2$으로 고정한 상태에서 질량유속과 건도를 변화시키며 수행되었다. 실험결과 납작관의 종횡비가 열전달계수에 미치는 영향은 유동양식에 따라 달리 나타났다. 환상류에서는 종횡비가 증가할수록 증가하고 성층류에서는 종횡비가 증가할수록 감소하였다. 한편 납작관의 마찰손실은 종횡비가 증가할수록 증가하였다. 기존 상관식들은 납작관의 열전달계수와 마찰계수를 적절히 예측하였다.

• 대한기계학회논문집A
• /
• 제31권4호
• /
• pp.425-431
• /
• 2007

[ $Al_2O_3/SiC$ ]composite ceramics were sintered to evaluate the bending strength and elastic wave characteristics. The three-point bending test was carried out under room temperature. The elastic wave was detected by fracture wave detector. The crack healing behavior was investigated from 1373 K to 1723 K. The bending strength of $Al_2O_3/SiC$ composite by nanocomposite is higher than that of $Al_2O_3$ monolithic. Crack-healing behavior depended on an amount of additive powder $Y_2O_3$. In $Al_2O_3/SiC$ composite ceramics with 3 wt. % $Y_2O_3$ for additive powder, the bending strength at 1573 K is about 100% increase than that of the smooth specimens. From the result of wavelet analysis of elastic wave signal, the smooth specimen and heat treated specimen of $Al_2O_3$ monolithic and $Al_2O_3/SiC$ composite ceramics showed characteristics of frequency about 58 kHz. The strength of $Al_2O_3/SiC$ composite ceramics was a little higher than those of $Al_2O_3$ monolithic. The dominant frequencies were high with increasing of $Y_2O_3$ for additive powder. The dominant frequencies had direct connection with the bending strength.

• 한국태양에너지학회 논문집
• /
• 제39권6호
• /
• pp.55-65
• /
• 2019

With the rapid development of the national industry, the importance of electrical safety was recognized because of a lot of new electrical equipment are installing and the electrical accidents have been occurring annually. Today, the electrical equipments is inspect by using the portable Infrared thermal imaging camera. but the most negative element of using the camera is inspected for only state of heating, the reliable diagnosis is depended with inspector's knowledge, and real-time monitoring is impossible. This paper present the infrared thermal imaging safety diagnosis system. This system is able to monitor in real time, predict the state of fault, and diagnose the state with analysis of thermal and power data. The system consists of a main processor, an infrared camera module, the power data acquisition board, and a server. The diagnostic algorithm is based on a mathematical model designed by analyzing the Pearson's Correlation Coefficient between temperature and power data. To test the prediction algorithm, the simulations were performed by damaging the terminals or cables on the switchboard to generate a large amount of heat. Utilizing these simulations, the developed prediction algorithm was verified.

• Korean Journal of Acupuncture
• /
• 제27권2호
• /
• pp.71-78
• /
• 2010

Objectives : The warm needling technique is a combination of acupuncture and moxibustion. The purpose of this study was to find the physical and thermal characteristics in order to identify the effects and mechanisms of the warm needling technique. Methods : In this study, the thermal changes were observed with a testo 845 device, which is an infra-red thermometer specifically designed for measuring a combustion of corn shaped moxibustion(moxa-corn). The thermal changes at the apex of the moxa-corn placed on the top of the an acupuncture were observed at the level of 1 cm and 2 cm from the apex to understand heat conduction through acupuncture needle for combustion of moxa-corn. Results and Conclusions : The thermal conduction through acupuncture needle from the moxa-corn was relative to the weight of moxa-corn and was inversely relative to the distance of the moxa-corn and acupuncture needle length. And the value of thermal conduction to the apex of the acupuncture needle from the moxa-corn was about $3{\sim}5^{\circ}C$. The above results suggest that the present study may be useful in finding the mechanism and effects of the warming needling technique.

• 미생물학회지
• /
• 제27권4호
• /
• pp.404-414
• /
• 1989

김치발효 중 Gram 양성세균 또는 유산균의 분리와 동정을 시도하였다. 종의 다양성은 분리배지와 온도에 영양을 받았고, 다양성은 온도가 낮아질수록 감소하는 경향이었다. MRS는 세균의 분리에 KM(김치재료로 만든 자연배지)은 종의 수를 파악 하는데 각각 적합하였다. 분리균의 동정은 Bergey's manual of Systematic Bacterio]ogy (1986)를 기초로 하여 작성한 이 분농생표(dichotomous Identification scheme)에 의하여 선행하였다. 각 온도(5, 15, $25^{\circ}C$)에서 동정된 Gram 양성세균은 Leuconostoc 5종, Streptococcus 4종, Pediococcus 3종, Bacillus 2종 그리고 Ltobacillms 18종이였다. 각 온도에서 출현 빈도가 높은 종은 $25^{\circ}C$에서 LactobaIlus ptantanmz, Streptococcµs faffinolactis, Leuconostoc maιnteroid, subsp mlsentιroides 이었고, $15^{\circ}C$에서 L. mesenteroides Lactobacillus fructosus, L. maen teroid,l.I subsp. mesent,roid, 이였고, $5^{\circ}C$ 에서 Leuconostoc sp.(65.2 빈도)에 의하여 이루어졌다. 그리고 각 온도에 따른 김치발효 중 지금까지 알려진 Pediococcus cerevisiae 와 Streptococcus faecalis는 분리되지 않았다.