• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1613-1620
• /
• 2011

CSD is IEEE Stan없rd 802.15.4b based Container Security Device which is proposed by the U.S Department of Home Security. It is mounted inside the container to sense opening of the container door. ConTracer is the CSD which is developed in this research whose major features are sensing door opening status as well as history inquiring on internal environment and shock to the container by mounting the temperature/humidity/shock sensors. Moreover, its RFID frequency bandwidth uses 2.4GHz 10 correspond actively to the radio regulations used by different countries. This. paper introduces the development trend of CSD, compares the ConTracer which is developed thru this research and other company's CSD, and introduces CSD System which is designed and established using ConTracer. Finally, the implemented CSD System is verified by applying the demonstration service to container distribution between Korea and Japan.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.3 s.49
• /
• pp.89-99
• /
• 2003

This study is peformed to examine the relationship between air pollution exposure and mortality in Incheon for the years of 1998 - 2001. Daily counts of death were analyzed by general additive Poisson model, with adjustment for effects of seasonal trend, air temperature, humidity, and day of the week as confounders in a nonparametric approach. Daily death counts were associated with CO(1 day before), O$_3$(2 day before), PM$_{10}$(1 day before), NO$_2$(1day before), SO$_2$(1 day before). Increase of 32.21 ${\mu}$g/m$^3$(interquartile range) in PM$_{10}$ was associated with 1.9 % (95% CI = 0.8 % - 2.9 %) increase in the daily number of death. This effect was greater in children(less than 15 aged) and elderly(more than 65 aged). We concluded that Incheon had 2 - 4 % increase in mortality in association with IQR in air pollutants. Daily variations in air pollution within the range currently occurring in Incheon might have an adverse effect on daily mortality. These findings also support the hypothesis that air pollution, at levels below the current ambient air quality standards of Korea, is harmful to sensitive subjects, such as children or elderly.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.173.1-173.1
• /
• 2011

The high fuel flexibility of gas turbine power system has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and sewage waste water as a fuel for gas turbines has increased. We investigated the performance of high pressure biogas compression system and operating conditions for supplying biogas. The total flow per minute of biogas from food waste water digestion tank is $54Nm^3$. The main type of biogas compression system is the reciprocating system and screw type system. The target of biogas mechanical data is the as belows; inlet pressure 0.045bar, supplying biogas temperature is $30{\sim}60^{\circ}C$, and final pressure is above the 25 bar. Also, inlet conditions of biogas consist of CH4 48.5%~83%, $H_2S$ Max. 500ppm, $NH_3$ Max. 1,500ppm and Siloxane 2.7~4.6ppm. The boosting Blower system raises a pressure from 0.045bar to 1bar before main compressor. The main system lay out of reciprocating consisits of compressor driver, filter, cooling system, blowdown vessel, control system and ESD(Emergency Shut Down) system. And an enclosure package needs to be installed for reducing noise up to 75dB. The system driver is the electronic motor of explosion proof type. Forthe compressor system reliable operation, the cleaning system something like particulate filter needs to be set up in the inlet of compressor and Coalescing Filter in the outlet of compressor. Particulate Filter has to be removed above $10{\mu}m$ size of the particles in biogas. The coalescing filter(Micofine Borosilicate Glass Fibers Filter treated phenol acid) also removes moisture and oil of above $0.3{\mu}m$ to be involved in high pressure biogas up to 90%~98%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.3
• /
• pp.251-264
• /
• 2017

Recently, Jeollabuk-do has been reported as a province where the $PM_{10}$concentration is one of the highest levels in South Korea. To explore the characteristics and origins of the $PM_{10}$in Jeollabuk-do, we present one of the first long-term datasets including a statistical analysis of $PM_{10}$concentrations obtained from six cities in the province from 2010 to 2015. During the entire periods, the mean hourly $PM_{10}$concentration was $49.3{\mu}g/m^3$, which correspond to the annual ambient air quality standards for $PM_{10}$in South Korea, and the annual $PM_{10}$concentration of each city showed a similarity in year-to-year variations. In the monthly variation of $PM_{10}$, the $PM_{10}$concentrations showed a maximum value in May that was one of the top levels among the provinces of Korea while the concentrations were dramatically decreased in August showing one of the lowest levels among the provinces in Korea. For the diurnal variation of $PM_{10}$, the $PM_{10}$concentration was enhanced during the rush hours together with gaseous species of $NO_2$, and CO. When the high concentrations of $PM_{10}$were observed (the highest 10% of the $PM_{10}$mass contribution), temperature and relative humidity were low. Using HYSPLIT backward trajectories and cluster analysis for the high $PM_{10}$concentrations, we found that the pollution plumes were transported mainly from China.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.123-130
• /
• 2020

Submerged Membrane bioreactor (SMBR) is one of the last techniques that allow a high quality of treated industrial effluents by coupling biological treatment and membrane separation. Thus, this research was an effort to evaluate performance of a SMBR treating a model textile wastewater (MTWW). Different SMBR operating parameters like mixed liquor suspended solids (MLSS) and Dissolved oxygen concentration, hydraulic retention time (HRT), and nutrients addition (N and P) have been investigated. MTWW (influent to the SMBR) was generated using the reactive azo-dye, Novacron blue FNG (100mg/L feed concentration). Results of MTWW treatment using SMBR under optimal operating conditions (MLSS, 4.2-13.3g/L; HRT, 4 days; pH, 6.9-7.2; conductivity, 400-900 μS/cm and temperature, 19.4-22.2 ℃) showed that COD and blue colour treatment performances are between 94-98% and 30-80%, respectively. It is concluded that SMBR can be used in large scale textile wastewater treatment plants to improve effluent quality in order to meet effluent discharge standards.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.371-378
• /
• 1994

The detection range of this galvanic oxygen sensor for oxygen concentration was 0.0% to 20.0%. By using gold or silver as cathode, reproducible response time and sensitivity to change of oxygen concentration were observed. The anode was Pb-Sn-Ca alloy. Oxygen selective permeable membrane was hydrophobic and porous Teflon film. The effect of the membranes varying in thickness have been studied on the temperature($10{\sim}50^{\circ}C$) and relative humidity(R. H 0~99%). Lead acetate buffer solution as the electrolyte has shown a high output voltage and longer life.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.443-450
• /
• 2020

No established method can be used to select effective antibiotics in antibiotic susceptibility tests for fish bacterial pathogens quickly and accurately. Here, we established the optimal conditions for determining the minimal inhibitory concentration (MIC) of major fish bacterial pathogens (Streptococcus spp., Edwardsiella tarda, Vibrio spp., Aeromonas spp., and Pseudomonas spp.) using the KRAQ1 and CAMPY2 panels. The MIC panel used 18 antibiotics of two types and we conducted experiments to establish the optimal culture medium and temperature for each species. The optimal conditions for incubating Streptococcus spp. were in cation-adjusted Mueller-Hinton broth with TES buffer (CAMHBT) at 28℃, using 5% lysed horse blood (LHB) as recommended by the Clinical Laboratory Standards Institute. For Vibrio spp., the optimal culture conditions were 28℃ in CAMHBT supplemented with 1% NaCl. The optimal conditions for culturing E. tarda, Aeromonas spp., and Pseudomonas spp. were in CAMHBT at 28℃.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.897-905
• /
• 2019

To compare the composting characteristics of food waste supplemented with various bulking agents, aerated composting was performed by mixing sawdust, ginkgo leaves, insect feces, and mushroom waste at ratios of 6 : 4 (w/w). The initial temperatures (day after treatment [DAT] 3) of the sawdust, ginkgo leaves, insect feces and the mushroom waste mixtures were 39, 58, 65, and 51℃, respectively. The DAT 3 temperature was the highest in the food waste-insect feces mixture (65℃) and the lowest in the sawdust one (39℃). However, the insect feces treatment was terminated at DAT 21 because of a high water content (70.92%). The water content (DAT 56) of the composted food waste supplemented with sawdust, mushroom waste, and ginkgo leaves stood at 51.28, 39.81, and 44.92%, respectively. Therefore, the fully mature composts satisfied the water content requirement of less than 55% as recommended in the fertilizer standards of the RDA of Korea. The results of the CoMMe-101, Solvita and seed germination index methods indicate that the mushroom waste and ginkgo leaves treatments matured relatively quicker than that of the sawdust one. Based on the above observations, it is concluded that the mushroom waste and ginkgo leaves are more effective bulking agents compared to sawdust and as such, are recommended as suitable replacements for sawdust in food waste composting.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.409-414
• /
• 2003

The room-temperature operating semiconductor GaMnN is known to be improved in its magnetic property when a highly conductive precipitate $Mn_3$GaN exists. Therefore, it is useful to investigate the behavior of the precipitate through heat treatments for further improvement of its magnetic property. Furthermore, neutron irradiation may further influence the behavior of the precipitates, and consequently, their effects on the magnetization. With the heat treatment, $Mn_3$GaN decomposed and a new phase of $Mn_3$Ga has generated. The kinetics was accelerated by neutron irradiation, which might generate defects that can help the decomposition of N and/or the formation of $Mn_3$Ga. The increase and decrease of the magnetization of the heat-treated GaMnN thin films were explained consistently by the behavior of the precipitates.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.953-956
• /
• 2008

The present study was to develop a dry PFB method similar to the existing gypsum board construction method in order to apply the existing wet PFB method that uses fire.resistant adhesive. It was found that the existing wet method can produce concrete compressive strength of 80MPa and fire resistance of 3 hours with 30mm PF boards. The goal of development in this study was fire resistance of 3 hours through dry construction of 15mm fire.resistant boards.According to the results of fire resistance test, when the dry PF method was applied, the temperature of the main reinforcing bar was 116$^{\circ}$C in 15mm, 103.8$^{\circ}$C in 20mm, and 94$^{\circ}$C in 25mm, and these results satisfied the current standards for fire resistance control presented by the Ministry of Land, Transport and Maritime Affairs. When a 3.hour fire resistance test was performed and the external properties of the specimen were examined, the outermost gypsum board hardly remained and internal PF board maintained its form without thermal strain.