• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.283.2-283.2
• /
• 2014

열필라멘트 화학증착공정(Hot Wire Chemical Vapor Deposition)에서 기상 에서 생성되는 하전된 실리콘 나노입자와 저온결정성 실리콘박막 증착의 연관성을 압력의 변화에 따른 상호비교를 통해 조사하였다. 필라멘트 온도는 $1800^{\circ}C$로 고정시키고 0.3~2 torr의 범위에서 공정 압력을 변화시키면서 증착하였다. 압력이 증가함에 따라 증착된 실리콘 박막의 결정화도는 증가하였으며, 증착속도는 감소하였다. 반응기 압력에 따른 기상에서 생성되는 나노입자의 크기분포의 변화를 조사하기 위하여 탄소막이 코팅된 투과전자현미경(Transmission Electron Microscopy) 그리드 위에 실리콘 나노입자를 포획하고 관찰하였다. 포획된 실리콘 나노입자의 크기분포와 개수농도는 압력이 증가함에 따라 감소하였다. 투과전자현미경을 이용하여 분석한 결과, 나노입자는 결정성 구조를 보였다. 압력이 증가함에 따라 나노입자의 크기가 감소하고 개수농도가 감소하는 것은 증착속도의 감소와 관련됨을 알 수 있다. 한편, 공정압력 증가에 따른 나노입자의 크기분포 및 개수농도 감소와 증착속도의 감소는 일반적으로 알려진 기상에서 석출하는 고상의 평형석출량(equilibrium amount of precipitation)이 압력의 증가함에 따라 증가한다는 사실과 일치하지 않는다. 이러한 압력경향성은 Si-H 시스템이 0.3~2 torr의 압력 영역에서 retrograde solubility를 갖는 것을 의미한다. 나노입자의 하전여부, 크기분포 및 개수농도를 측정하기 위하여 입자빔질량분석장비(Particle Beam Mass Spectroscopy)를 이용하였다. 그 결과, 실리콘 나노입자는 양 또는 음의 극성을 가진 하전된 상태임을 확인하였고, 투과전자현미경(TEM) grid에 포획한 실리콘 나노입자의 크기와 경향성이 일치하였다. 이는 나노입자가 저온의 기판에서 핵생성되어 성장하여 생성된 것이 아니라 열필라멘트 주위의 고온영역에서 생성된 것을 의미한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1292-1297
• /
• 2009

This study was performed to investigate solubility, dissolution rate and ash content of solid type fuel additive in gasoline and diesel in order to set up manufacturing standards. From the results, the unfiltered impurities were increased when the fuel additive was added on gasoline and diesel. Also, the unfiltered fuel additive was decreased with respect to increasing the pore size of the filter paper. When one gram of the fuel additive was dissolved in one liter of gasoline at room temperature, the best dissolution rate was about 2 hours. But, almost nothing was dissolved in diesel during 72 hours at $20^{\circ}C$ below zero. At the experiment of ash content, the gasoline which the fuel additive was melted in was showing 28 times more ash content than that was not including the fuel additive. Therefore, it seemed that almost all of ash content was caused by the fuel additive.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.23-31
• /
• 2012

Recent research on stand-alone focused on the improvement and development of functions for solving problems such as the limited operating time of stand-alone installed at dwelling and their low reliability caused by false alarms, but it is more urgent to study on the operating range of stand-alone sensor in consideration of the impacts of combustion products on residents because the primary goal of fire safety is minimizing casualties. This study purposed to propose the optimized operating range of stand-alone sensor in consideration of the impacts of combustion products on residents. For this purpose, we made a mathematical approach to the change of temperature over the lapse of time in compartment fires similar to house fires, and established the standards of the body's response against heat and smoke based on literature review. In addition, we surveyed domestic and foreign technological standards for stand-alone sensor, and converted them to standards for residents of the body's response against heat and smoke using mathematical model equations and analyzed them comparatively.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.4
• /
• pp.339-344
• /
• 2007

Safety of large scale cable in bridge is very important because it may cause the unwanted catastrophic failure. Although the proof load were considered at the design stage, its soundness must be monitored continuously because the cable may be broken out without warning by the variable external load. The cable tension of in-use structures has been mainly measured by the resonance method and its use has been limited because of relatively large measurement uncertainty. Recently a new magnetic method was developed and its reliability is known to be good for evaluating the cable tension. In this study a system which can deliver the calibrated load to the cable was developed and the measurement reliability of developed magnetic sensor according to the change of external load was analyzed quantitatively. The effect of magnetization frequency, bias magnetic field, and temperature on the sensor output was also evaluated.

• Journal of the Korean Dietetic Association
• /
• v.27 no.1
• /
• pp.45-58
• /
• 2021

This study evaluated the sanitation management standards for vegetable preparation processes without a cooking stage. The aerobic plate counts (APC), coliform counts, and Escherichia coli of the samples at each production step were analyzed, and microbial growth of the samples stored at different temperatures was measured. The validation was judged in accordance with the microbial criteria stipulated by the British PHLS. After washing and disinfection, the APCs of the two samples decreased to 3~4 log CFU/g in both seasons. Compared to the purchasing stage, the decrease in coliform counts was approximately 0~3 log CFU/g in both seasons; E. coli was not detected. The initial APC and coliform levels of two vegetable samples were 4~5 log CFU/g in both seasons, with an increase of 1 log CFU/g taking more than 6 h at 25℃ and 2 h at 35℃. More than 10 h at 25℃ and 6 h at 35℃ were required to increase the E. coli O157:H7 count by 1~2 log CFU/g for two seasoned samples. In conclusion, washing and disinfection effects and changes in microbial growth during room temperature storage were similar in the two vegetables. Despite the low sanitizing effect of the two vegetables, when cut vegetables were stored under the critical limit within 2 h at two different room temperatures, seasoned lettuce and chicory were at the 'satisfactory' or 'acceptable' levels of PHLS regardless of the storage temperatures. The validation of sanitation management standards applied to vegetable preparation with the no-cook step was approved.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.118-127
• /
• 2012

Objectives: This study was undertaken to assess the sanitary conditions in the kitchens of food court/cafeterias and determine seasonal variations. Methods: We measured environmental factors (air temperature, relative humidity, illumination intensity, noise level), and dropping airborne microbes (bacteria and fungi) in the kitchens of eight food court/cafeterias in four seasons (January, April, July, and October). Air temperature and relative humidity were measured with in/out thermo-hygrometers at 1.2-1.5 m above floor level. Illuminance measurement was performed through the multiple point method of Korean Standards (KS). Noise level was measured by the standard methods for the examination of environmental pollution (noise and vibration) of Korea. The estimation of dropping airborne bacteria and fungi was performed through use of Koch's method. Results: The highest kitchen air temperature was in July, and the lowest in January. The average temperature surpassed $21^{\circ}C$ throughout the seasons, suggesting a higher temperature than required for the safe handling of food. Humidity in all the kitchens was measured in the range of 50-60%. Half of the kitchens showed illumination intensities below 300 Lux in April. It was found that the sound pressure level of noise in almost all of the kitchens was higher than 85 dB (A). The highest levels of dropping airborne bacteria and fungi were noted in July. The numbers of airborne bacteria were higher than those of fungi. The levels of dropping airborne bacteria and fungi were affected by air temperature, relative humidity, season, and place. Conclusions: This study indicates that the kitchen environments were unqualified to supply safe food. The hygiene level of the kitchens should be improved.

• Journal of the Korean Home Economics Association
• /
• v.40 no.11
• /
• pp.193-205
• /
• 2002

To evaluate farmers' workload during harvesting grapes in summer, this study investigated farmers' physiological, psychological responses, work postures and thermal environment around in the field. This field study was conducted in the Anseong County of Kyonggi Province at the end of August. Five career farmers (1 male, 4 females) volunteered as subjects. Three of them were over their sixties. During harvesting grapes in the field, physiological responses were monitored continuously. 1. Air temperature (T/sub a/), air humidity(H/sub a/), black globe temperature(T/sub g/), air velocity and WBGT around the grape field were 26.9℃, 77.7%RH, 32.8℃, 0.08㎧ and 26.3℃, respectively. Because farmers started the harvesting task in early morning, thermal environments weren't conditions to give farmers severe heat strain. 2. The percentage of the work postures was larger in order of standing, walking, and bending one's back posture. Particularly, the percentage of standing posture with raising both arms above shoulder of two farmers was up to 29% and 61% of the total work duration. 3. Rectal temperature (T/sub re/), mean skin temperature (T/sub sk/), clothing microclimate temperature (T/sub cl/) on the chest and the back, heart rate (HR) and energy expenditure (EE) were 37.2℃, 33.1℃, 32.0℃, 32.4℃, 88bpm and 1.3 Kca1/㎡/min respectively. In the point of these physiological results, we evaluated that the harvesting task was a moderate work. 4. All farmers expressed‘hard, hot, humid and slightly uncomfortable’ at the end of works for each subjective questionnaire. The grape harvesting tasks were not evaluated as a very hard work in the point of physiological work standards. But we considered 1) inappropriate work posture (standing posture with raising both arms above shoulder) and 2) farmers' age as burden factors. These findings suggest that adding adequate protective clothing/equipments for farmers may contribute to maintain their body temperature within the normal range, stabilize HR and decrease psychological strain.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.559-565
• /
• 2015

The ductile-brittle transition behavior of two austenitic Fe-18Cr-10Mn-N-C alloys with different grain sizes was investigated in this study. The alloys exhibited a ductile-brittle transition behavior because of an unusual brittle fracture at low temperatures unlike conventional austenitic alloys. The alloy specimens with a smaller grain size had a higher yield and tensile strengths than those with a larger grain size due to grain refinement strengthening. However, a decrease in the grain size deteriorated the low-temperature toughness by increasing the ductile-brittle transition temperature because nitrogen or carbon could enhance the effectiveness of the grain boundaries to overcome the thermal energy. It could be explained by the temperature dependence of the yield stress based on low-temperature tensile tests. In order to improve both the strength and toughness of austenitic Fe-Cr-Mn-N-C alloys with different chemical compositions and grain sizes, more systematic studies are required to understand the effect of the grain size on the mechanical properties in relation to the temperature sensitivity of yield and fracture stresses.

• Journal of Animal Science and Technology
• /
• v.65 no.4
• /
• pp.878-889
• /
• 2023

Animal welfare during transport became an largely issue because of increasing demand for improved animal welfare standards. Most studies on the animal welfare during transportation have concentrated on the atmosphere and the temperature of the truck compartments. Thus, the objective of study was to collect and quantify three axis acceleration and determine the effect of bedding for transporting pigs from farm to slaughterhouse. A total of 2,840 crossbred fattening pigs with a live weight of approximately 115 kg were used. They were raised in the same commercial farms and transported to the same commercial slaughterhouse. A 3×2×2 completely randomized factorial design was used to investigate effects of rubber type bedding (bedding or non-bedding) and two levels of driving style (aggressive or normal) in three different time periods with different outside temperatures. Air temperature treatments were as follow: high temperature ([HT] higher than 24℃); low temperature ([LT] lower than 10℃); normal temperature ([NT] 10℃ to 24℃). In our experiment, pigs transported under aggressive driving style showed lower (p < 0.05) pH and water holding capacity (WHC) than those transported under normal driving style. Pigs transported under normal driving style showed a lower percentage of drip loss (DL) (p < 0.05) than those transported with an aggressive driving style. Also, transported with bedding showed higher (p < 0.05) lying behavior but lower (p < 0.05) sitting behavior than those transported without bedding. Pigs transported under normal driving style showed lower (p < 0.05) cortisol level than those transported under aggressive driving style. In conclusion, aggressive driving style cause acute stress in pigs, while bedding helps alleviate acute stress in pigs during transportation in LT.

• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.127-132
• /
• 2009

We have investigated the intrinsic defects remaining in epitaxial GaSb layers grown on SI-GaAs substrates compared to those in bulk GaSb crystal substrate, which is a basic material of Sb-based strained-layer superlattice infrared photodetectors. From the functional dependence of the band-to-band transition energy of the photomuminescence (PL) spectra observing up to near room-temperature (250 K), the temperature parameters of [$E_o$, $\alpha$, $\beta$] of undoped GaSb crystal are determined by using the Varshni empirical equation describing the temperature variation of the bandgap energy. Additionally to the antisite-Ga ([$Ga_{Sb}$]) with an ionization energy of 29 meV that is well known to a major intrinsic defect in GaSb, epitaxial GaSb layers show a pair of deep states at the emission energy of 732/711 meV that may be related with a complex of two antisite-Ga and antisite-Sb ([$Ga_{Sb}-Sb_{Ga}$]). Based on the analysis of the temperature and the excitation-power dependences of PL, it suggests that excess-Sb substitutes Ga-site by self-diffusion and two anti sites of [$Ga_{Sb}$] and [$Sb_{Ga}$] could form as a complex of [$Ga_{Sb}-Sb_{Ga}$] in GaSb epilayers grown under Sb-rich condition.