• 제목/요약/키워드: temperature stable characteristics

검색결과 962건 처리시간 0.025초

병실 냉.난방을 위한 초퍼와 PWM 전압형 인버터를 이용한 계통 연계형 태양광 발전시스템에 관한 연구 (A Study on the Utility Interactive Photovoltaic System Using a Chopper and PWM Voltage Source Inverter for Air Conditioner a Clinic room)

  • 황락훈;나승권
    • 한국산학기술학회논문지
    • /
    • 제9권2호
    • /
    • pp.360-369
    • /
    • 2008
  • 태양전지는 일사량, 온도와 부하에 의해 크게 변동하기 때문에 가능한 한 많은 에너지를 얻기 위해서는 태양전지의 출력을 항상 최대로 제어할 필요가 있다. 태양전지의 출력은 직류이므로 교류부하에 적용하기 위해서는 전력변환장치 중 인버터가 필수적이며 단위 역률을 갖는 정현파 전류 및 전압을 부하계통에 공급해 주어야 한다. 본 논문에서는 태양광 발전시스템을 승압 쵸퍼와 단상 PWM(Pulse Width Modultion) 전압형 인버터로 구성하였고, 안정된 변조를 위해서 동기신호와 제어신호를 원칩 마이크로프로세서에 의해서 처리하였다. 전력비교에 따라 시비율을 변화시키지만 태양전지는 전형적인 수하특성을 갖고 있어, 일사량과 온도변화에 관계없이 항상 최대 출력 점을 추적하도록 승압초퍼를 제어하였다. 단상 PWM 전압형 인버터는 태양전지가 연속 발전할 수 없는 단점을 보완하기 위해 일반 상용전원과 연계함으로써 약 $10{\sim}20%$ 전력절감효과를 얻을 수 있는 에너지절약 전원복합형 전력변환장치로 구성되어 있다. 단상 PWM 전압형 인버터와 위상동기를 위해서 계통전압을 검출하여 계통전압과 인버터 출력을 동상 운전하므로 잉여전력을 계통과 연계할 수 있게 하여 고 역률과 저고조파 출력을 유지 하므로써 부하와 계통에 전력이 안정하게 공급될 수 있도록 제어하였다.

Mn-Ni계 산화물 박막의 특성에 대한 기판과 열처리 온도의 영향 (Effects of Substrate and Annealing Temperature on the Characteristics of Mn-Ni oxide Thin Films)

  • 김철수;최성호;이용성;조병렬;김병수
    • 한국재료학회지
    • /
    • 제8권5호
    • /
    • pp.424-428
    • /
    • 1998
  • RF magnetron sputter로 알루미나 기판 위에 증착한 NTC 써미스터용 Mn-Ni계 산화물 박막의 기판온도 변화와 열처리에 따른 미세구조, 결정상, 비저항, B정수 변화에 관하여 연구하였다. 미세구조는 $178^{\circ}C$이하에서 증착한 막의 경우 fibrous microcrystalline이었고, $320^{\circ}C$$400^{\circ}C$에서는 columnar grain 구조로 바뀌었다. 또한, 90$0^{\circ}C$에서 열처리한 박막의 경우 equiaxed grain 형태의 미세구조를 나타내었다. 박막의 결정상은 대부분 입방 스피넬(cubic spinel)상과 $Mn_{2}$$O_{3}$ 상이 공존하였고, $400^{\circ}C$에서 증착한 경우 $700^{\circ}C$이상에서 열처리하면 입방 스피넬의 단상으로 바뀌었다. 기판온도가 증가함에 따라 비저항과 B정수도 급격하게 감소하였으며, $600^{\circ}C$~$700^{\circ}C$로 열처리할 경우 이 값들이 대체로 낮고 안정된 특성을 보였다. 본 연구의 박막 시편들은 모두 NTC 써미스터의 특성을 나타내었다.

  • PDF

Antibacterial Activity and Probiotic Potential of Lactobacillus plantarum HKN01: A New Insight into the Morphological Changes of Antibacterial Compound-Treated Escherichia coli by Electron Microscopy

  • Sharafi, Hakimeh;Maleki, Hadi;Ahmadian, Gholamreza;Zahiri, Hossein Shahbani;Sajedinejad, Neda;Houshmand, Behzad;Vali, Hojatollah;Noghabi, Kambiz Akbari
    • Journal of Microbiology and Biotechnology
    • /
    • 제23권2호
    • /
    • pp.225-236
    • /
    • 2013
  • Among several bacteria examined, an antibacterial-producing Lactobacillus strain with probiotic characteristics was selected and identified based on 16S rRNA gene sequencing. Subsequent purification and mode of action of the antibacterial compounds on target cells including E. coli were investigated. Maximum production of the antibacterial compound was recorded at 18 h incubation at $30^{\circ}C$. Interestingly, antibacterial activity remained unchanged after heating at $121^{\circ}C$ for 45 min, 24 h storage in temperature range of $70^{\circ}C$ to room temperature, and 15 min exposure to UV light, and it was stable in the pH of range 2-10. The active compounds were inactivated by proteolytic enzymes, indicating their proteinaceous nature, and, therefore, referred to as bacteriocin-like inhibitory substances. Isolation and partial purification of the effective agent was done by performing ammonium sulfate precipitation and gel filtration chromatography. The molecular mass of the GFC-purified active compound (~3 kDa) was determined by Tris-Tricine SDS-PAGE. To predict the mechanisms of action, transmission electron microscopy (TEM) analysis of ultrathin sections of E. coli before and after antibacterial treatment was carried out. TEM analysis of antibacterial compounds-treated E. coli demonstrated that the completely altered bacteria appear much darker compared with the less altered bacteria, suggesting a change in the cytoplasmic composition. There were also some membrane-bound convoluted structures visible within the completely altered bacteria, which could be attributed to the response of the E. coli to the treatment with the antibacterial compound. According to the in vivo experiments oral administration of L. plantarum HKN01 resulted in recovery of infected BALB/c mice with Salmonella enterica ser. Typhimurium.

Sn이 첨가된 Li4Ti5O12 음극활물질의 전기화학적 특성 (Electrochemical Characteristics of Sn Added Li4Ti5O12 as an Anode Material)

  • 정충훈;김선아;조병원;나병기
    • 전기화학회지
    • /
    • 제14권1호
    • /
    • pp.16-21
    • /
    • 2011
  • 리튬이온이차전지용 음극활물질 $Li_4Sn_xTi_{5-x}O_{12}$ 화합물을 high energy ball milling (HEBM)법을 사용하여 제조하였다. $Li_4Ti_5O_{12}$$SnO_2$의 첨가량을 달리하여 혼합 제조 후, 열처리를 통하여 합성하였다. 본 연구는 Sn의 첨가물에 따른 $Li_4Ti_5O_{12}$의 전기화학적 성능의 변화를 살펴보고자 하였다. 제조된 시료들의 물리적 특성을 조사하기 위해 XRD, SEM, PSA 등의 분석장비를 사용하였다. 충/방전 시험기를 사용하여 1.0~3.0 V 전압범위에서 제조된 활물질의 충/방전 특성을 알아보았다. 열처리 온도에 따라 합성한 $Li_4Sn_xTi_{5-x}O_{12}$의 구조적 특성과 전기화학적 성능을 볼 때, 합성 열처리 온도는 $800^{\circ}C$가 필요함을 확인하였으며, 합성물질 크기의 분포는 $0.2{\sim}0.6\;{\mu}m$임을 확인하였다. 충/방전 실험을 50 cycle 동안 상온에서 진행하였으며, Sn 첨가조건에 따른 가장 우수한 성능을 나타낸 초기용량은 168 mAh/g으로 측정 되었으며, 1.55 V(Li/$Li^+$) 영역에서 평탄전압을 나타내었다.

한국 재래 간장에서 분리한 Scopulariopsis brevicaulis가 생성하는 ${\alpha}-galactosidase$의 특성 및 작용양상 (Characteristics and Action Pattern of ${\alpha}-galactosidase$ from Scopulariopsis brevicaulis in Korean Traditional Meju)

  • 최광수;이선호;홍승표;이희덕;배두경;최청
    • Applied Biological Chemistry
    • /
    • 제41권7호
    • /
    • pp.489-495
    • /
    • 1998
  • 한국 재래 간장으로부터 분리한 Scopulariopsis brevicaulis가 생성하는 ${\alpha}-galactosidase$의 최적 생산조건은 tryptone 1.5%, $NH_4NO_3$ 0.2%, raffinose 2.5%, $KH_2PO_4$ 0.5%, yeast extract 0.5%, pH 7.0, $27^{\circ}C$에서 3일간 배양 했을 때였다. ${\alpha}-galactosidase$의 최적 pH는 7.0, 최적온도는 $27^{\circ}C$였으며, $pH\;6.0{\sim}8.0$범위와 $40^{\circ}C$이하에서 안정하였다. $Ag^{2+},\;Hg^{2+},\;Cu^{2+}$ 등의 금속이온 및 p-chloromercuribenzoic acid, Iodine에 의해 강하게 저해되어 본 효소의 catalytic부위에 -SH기가 있음이 추정되었다. Km값은 1.9 mM, Vmax값은 $9.66{\times}10^2\;{\mu}M/min$이었다. 배양기간에 따른 raffinose의 분해양상을 high performance liquid chromatography로 살펴본 결과 배양초기에 raffinose가 분해되어 sucrose, glucose, fructose가 관찰되었다. 배양기간이 경과함에 따라 raffinose가 감소하였고 sucrose, glucose, fructose도 소실됨을 확인하였다.

  • PDF

고체연료화 방법을 적용한 우분 처리 가능성 평가 (Feasibility test for Solidified Fuel with Cow Manure)

  • 정광화;김중곤;이동준
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권6호
    • /
    • pp.112-119
    • /
    • 2017
  • In this study, the availability of cow manure as raw material for solid fuel production was investigated. Since the water content of the cow manure was too high, it was dewatered using a laboratory hydraulic compressure ($11.3kg/cm^2$). The moisture content of the cow manure decreased from 82.01% to 73.36 wt.%. The dewatered cow manure was homogenized by the experimental apparatus and then put into the rotating cylindrical apparatus. From the consecutive processes, the cow ball-shaped pellet which size ranged from 3.0 to 25.0 mm was produced. The major factor for making palletized fuel from cow manure was the moisture content. Based on the experimental data, the moisture content of cow manure for pelletizing cow manure was identified as 65~75 wt.%. When the moisture content of the cow manure was lower than 30 wt.%, the diameter of the pellets maded from cow manure was smaller than 3 mm. On the other hand, when the water content of the cow manure was higher than 75 wt/%, the diameter of the processed pellets tended to be larger than 25 mm. The characteristics of the processed cow manure pellets was analyzed to be in accordance with the livestock solid fuel quality standard. The pyrolysis characteristic of the pellet was analyzed by raising the heating temperature of the experimental equipment from 200 to $900^{\circ}C$. The mass change between of 20 and $130^{\circ}C$ corresponds to the amount of moisture contained in the cow manure. The amount of moisture was about 15% of the total weight of cow manure samples. The cow manure pellet was thermally stable up to $280^{\circ}C$. It can be interpreted that combustion of cow manure pellet does not occur until the surface temperature reaches $280^{\circ}C$. The mass change of pellet between of 280 and $450^{\circ}C$ was considered to be due to the vaporization of volatile organic compounds (VOCs) present in the cow manure pellet. The maximum production of VOCs was showed near $330^{\circ}C$.

파일럿 규모의 공정에서 CO2가 함유된 합성가스로부터 합성천연가스(SNG) 생산 (SNG Production from CO2-Rich Syngas in a Pilot Scale SNG Process)

  • 강석환;류재홍;김진호;김효식;유영돈;김준우;고동준;강용
    • Korean Chemical Engineering Research
    • /
    • 제57권3호
    • /
    • pp.420-424
    • /
    • 2019
  • 포항산업과학연구원(RIST, Research Institute of Industrial Science & Technology)-고등기술연구원(IAE, Institute for Advanced Engineering)에서 제안한 합성천연가스(Synthetic Natural Gas, SNG) 제조공정(3개의 단열반응기와 1개의 등온반응기로 구성됨)에서, 합성가스와 함께 스팀을 공급함으로써 메탄화반응과 수성가스전환반응을 동시에 반응시켜 촉매층의 온도와 촉매 비활성화를 제어하였다. SNG 공정개발을 위해 본 연구에서는, 포항산업과학연구원에서 제조한 니켈계 촉매를 사용하여 낮은 $H_2/CO$ 비($CO_2$ 22% 포함) 조건에서의 메탄화반응 특성을 평가하였다. 운전조건(1차 단열반응기의 $H_2O/CO$ 비, 4차 등온반응기의 운전온도 범위 등)은 이전의 연구 결과를 반영하였으며, 동일한 조건을 유지하면서 파일럿 규모의 SNG 공정을 운전하였다. 그 결과, 파일럿 규모의 SNG 공정은 안정적으로 운전되었으며, CO 전환율 100%, $CH_4$ 선택도는 96.9% 그리고 $CH_4$ 생산성은 $660ml/g_{cat}{\cdot}h$의 값을 얻었다.

수열합성법과 고상법을 이용해 제조된 Zn-ferrite 분말의 이산화탄소 분해 특성 (CO2 Decomposition Characteristics of Zn-ferrite Powder Prepared by Hydrothermal and Solid State Reaction)

  • 남성찬;박성열;윤여일;정순관
    • 공업화학
    • /
    • 제22권5호
    • /
    • pp.555-561
    • /
    • 2011
  • 본 연구에서는 연소 배기가스로부터 포집된 이산화탄소를 다시 일산화탄소 또는 탄소로 전환하여 산업에 다시 활용하고자 하는 탄소순환형 기술개발이 목적이다. 그러나 이산화탄소는 안정한 화합물로 쉽게 분해되지 않기 때문에 적합한 금속계 산화물(활성화제)이 필요하며, 가능한 낮은 온도에서 분해되어야 한다. 따라서 본 연구에서는 Zn계 페라이트를 사용하여 $CO_2$$500^{\circ}C$의 온도에서 CO나 C로 전환할 수 있는 금속계 산화물을 수열합성과 고상법을 이용하여 제조하였다. 이산화탄소의 분해 특성을 실험하기 위해 TPR/TPO 장치와 TGA분석장비를 사용하였다. 수소에 의한 환원곡선 면적과 $CO_2$에 의한 흡착분해 곡선면적을 측정한 결과 ZnO가 5 wt% 포함되어 있는 Zn 페라이트가 가장 크게 나타났다. 또한 수소에 의한 흡착환원이 26.53 wt% 발생하였고, $CO_2$에 의한 산화량도 25.73 wt%로 가장 높게 나타났다. 이산화탄소의 흡착특성이 높지는 않았지만 분해효율이 96.98%로 우수한 산화 환원 특성을 나타내었다.

표고 봉형 톱밥재배시 배양중 침공처리가 '자담'의 발이 및 자실체 생산에 미치는 영향 (Cultural characteristics and fruiting body productivity of new Lentinula edodes cultivar 'Jadam' in rod-type sawdust cultivation)

  • 김정한;강영주;김연진;이채영;최준영;이찬중;임갑준
    • 한국버섯학회지
    • /
    • 제21권3호
    • /
    • pp.160-166
    • /
    • 2023
  • 표고 신품종 '자담'의 자실체 안정생산을 위해 침공처리가 균사배양 및 자실체 생산성에 미치는 영향을 조사하였다. 침공 직경과 깊이가 크고, 침공수가 많을수록 중량감 모율과 색차는 증가하고 명도는 감소하였다. 종균 접종 후 배지온도는 배양 33일에, CO2농도는 배양 19일에 최고치에 도달하였고, O2농도는 CO2 와 반대의 경향으로 배양 14일에 최저치를 나타냈다. 침공 직경과 깊이가 크고 침공수가 많을수록 배지 품온과 O2농도는 상승하였고, CO2농도는 낮아졌다. 수량성은 5×70 mm-30 처리구에서 644.7 g으로 다른처리구에 비해 가장 높은 수량을 보여 자담의 적정한 침공방법으로 선발하였다.

발이 안정 및 다수성 잎새버섯 신품종 '대박'의 특성 (Characteristics of a new Grifola frondosa Cultivar "Daebak" with stable pinheading and high yield)

  • 전대훈;이윤혜;최종인;권희민;지정현;홍혜정;장갑열
    • 한국버섯학회지
    • /
    • 제16권3호
    • /
    • pp.203-207
    • /
    • 2018
  • 발이가 안정적이고 다수성인 잎새버섯 신품종 "대박"의 주요특성은 다음과 같다. '대박'은 균사생장적온은 $25^{\circ}C$로 '참'(대조품종)과 같았으며, 병재배 시 재배일수는 57일로 '참'에 비하여 2일이 짧았다. 발이율은 98.4%로 '참'에 비하여 24.8%p 높았으며, CV(변이계수)는 0.6%으로 '참'에 비하여 5.3%p 적었다. 갓색은 Hunter 색채값의 L값은 55.3으로 '참'에 비하여 3.6이 적어 갓색이 더 짙었으며, 갓두께는 1.73 mm으로 '참'에 비하여 0.53 mm 적었다. 자실체 직경은 132 mm로 '참'에 비하여 11 mm가 컸으며, 높이는 87.2 mm으로 '참'에 비하여 2.8 mm가 높았다. 1,100 ml 병당 자실체중량은 139 g으로 '참'에 비하여 28% 많았으며, CV는 2.5%로 '참'에 비하여 6.2%p가 적었다. 버섯재배농가의 일반적 1일 입병수 10,000병 기준으로 볼 때, 수량은 1,376 kg으로 '참'에 비하여 70% 높았으며, CV는 3.0%로 '참'에 비하여 11.5%p가 적었다. 물리성(강도 및 깨짐성)은 '참'에 비하여 낮았으며, 저장성은 판매가능기간으로 볼 때 $4^{\circ}C$ 저장에서 42일로 '참'에 비하여 6일이 길었다.