• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.149-152
• /
• 2001

Extraction characteristics of anthocyanin pigment from red flower cabbage(Brassica oleracea L. var. acephala) as a new source of natural food colorant were investigated. The pigment extracted from red flower cabbage showed the characteristic bathochromic shift of the maximum wavelength of light absorption(${\lambda}_{max}$) as pH of the solution changed from pH 1 to 12. As the concentration of citric acid in the extraction solvent increased, extraction rate and total optical density(TOD) of the extract increased. Maximum TOD was obtained by using the extracting solvent including $0.8{\sim}1.0%$ citric acid and stable pigment solution was obtained by using the extracting solvent including $10{\sim}20%$ ethanol in distilled water. As a result, 10% ethanolic solution with 0.8% citric acid was decided as the optimum extraction solvent for the anthocyanin pigment from red flower cabbage. Within the experimental ranges, the extraction rate increased and therefore extraction time decreased as the extraction temperature increased. The times to reach a certain value of TOD i.e., 2.1 were 24, 8, 4 and 2 hours at extraction temperature of 5, 20, 40 and $60^{\circ}C$, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.2
• /
• pp.211-215
• /
• 2002

Pretense production and its characteristics were investigated for Rhizopus stolonifer, Rhizopus oryzae and Absidia corymbifera which were isolated from Korean traditional meju. The optimum culture conditions of the strains for the production of protease in basic medium [wheat bran : 1% glucose solution=1 : 1 (w/v)] were 3$0^{\circ}C$ and 4 days. The optimum pH and temperature for the enzyme activity of crude enzymes produced by Rhizopus sto-lonifer, Rhizopus oryzae and Absidia corymbifera were pH 6.0 and 5$0^{\circ}C$, respectively. The enzymes were relatively stable at pH 4.0~7.0, at temperature below 4$0^{\circ}C$, and at NaCl concentration lower than 16%. The $K_{m}$ value for Hammastein casein was 3.3$\times$10$^{-4}$ , 0.75$\times$10$^{-4}$ and 1.3$\times$10$^{-4}$ M, and $V_{max}$ value was 17.2$\mu\textrm{g}$/min, 9.4$\mu\textrm{g}$/min and 7.8$\mu\textrm{g}$/min, respectively.y.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.154-160
• /
• 2000

Protease production and its characteristics were investigated with Bacillus subtilis PCA20-3 which was isolated from Korean traditional meju. The optimum culture conditions of Bacillus subtilis PCA20-3 for the production of the protease were as follow: 0.2% soytone, 2% starch, 0.1% $(NH_4)_2SO_4,\;0.2%\;CaCl_2,\;0.01%\;yeast\;extract,\;0.1%\; K_2HPO_4,\;0.1%\;KH_2PO_4,\;pH\;7.0,\;30^{\circ}C$ and 20 hrs. The optimum pH and temperature for enzyme activity of protease producing Bacillus subtilis PCA20-3 were pH 8.0-10.0 and $55^{\circ}C$, respectively. The enzyme was relatively stable at pH $6.0{\sim}11.0$ and at temperature below $50^{\circ}C$. The activity of the enzyme was inhibited by $Fe^(2＋)\;and\;Cu^(2＋)$. 2 mM phenymethanesulfonyl fluoride inhibited 89.2% of enzyme activity. This indicates that the enzyme is serine protease. The $K_m$ value was $5\;{\times}\;10^{-4}\;M,\;V_{max}\;value\;was\;100\;{\mu}g/min$. This enzyme hydrolyzed casein more rapidly than bovine serum albumin.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.119-136
• /
• 2002

Contrasts in the style of the gold-silver mineralization in geologic and tectonic settings in Korea, together with radiometric age data, reflect the genetically different nature of hydrothermal activities, coinciding with the emplacement age and depth of Mesozoic magmatic activities. It represents a clear distinction between the plutonic settings of the Jurassic Daebo orogeny and the subvolcanic environments of the Cretaceous Bulgugsa igneous activities. Dunng the Daebo igneous activities (c.a. 200～150 (\ulcorner) Ma) coincident with orogenic time, gold mineralization took place between c.a. 195 and 135 (127 \ulcorner) Ma. The Jurassic Au deposits commonly show several characteristics; prominent association with pegmatites, low Ag/Au ratios In the ore-concentrating parts, massive vein morphology and a distinctively simple mineralogy including Fe-rich sphalerite, galena, chalcopyrite, arsenopyrite, Au-rich electrum, pyrrhotite and/or pyrite. During the Bulgugsa igneous activities (110～50 Ma), the precious-metal deposits are generally characterized by such features as complex vein morphology, medium to high Ag/Au ratios in the ore concentrates, and diversity of ore minerals including base-metal sulfides, pyrite, arsenopyrite, Ag-rich eletrum and native silver with Ag sulfides, Ag-Sb-As sulfosalts and he tellurides. Vein morphology, mineralogical, fluid inclusion and stable isotope results indicate the diverse genetic natures of hydrothermal systems in Korea. The Jurassic Au-dominant deposits (orogenic type) were formed at the relatively high temperature (about 300$^{\circ}$ to 45$0^{\circ}C$) and deep-crustal level (4.0$\pm$1.5 kb) from the hydrothermal fluids containing more amounts of magmatic waters ($\delta$$^{18}$ $O_{H2O}$; 5～10$\textperthousand$). It can be explained by the dominant ore-depositing mechanisms as $CO_2$ boiling and sulfidation, suggestive of hypo- to mesothermal environments. In contrast, the Cretaceous Au-dominant (l13～68 Ma), Au-Ag (108～47 Ma) and AE-dominant (103～45 Ma) deposits, which correspond to volcanic-plutonic-related type, occurred at relatively low temperature (about 200$^{\circ}$ to 35$0^{\circ}C$) and shallow-crustal level (1.0$\pm$0.5 kb) from the ore-forming fluids containing more amounts of less-evolved meteonc waters ($\delta$$^{18}$ $O_{H2O}$;-10～5$\textperthousand$). These characteristics of the Cretaceous precious-metal deposits can be attributed to the complekities in the ore-precipitating mechanisms (mixing, boiling, cooling), suggestive of epi- to mesothermal environments. Therefore, the differences of the emplacement depth between the Daebo and the Bulgugsa igneous activities directly influence the unique temporal and spatial association of the deposit styles.les.

• Journal of Forest and Environmental Science
• /
• v.37 no.4
• /
• pp.315-322
• /
• 2021

The aim of this study was to investigate the sensitivity to environmental stress, and changes in the photosynthesis capacity in Abies koreana seedlings by age and to suggest the most effective age for restoration. To identify these physiological characteristics of A. koreana, the chlorophyll fluorescence and photosynthetic capacity of 1-, 2-, 3-, 5- and 6-year-old A. koreana seedlings were observed from June 2020 to June 2021. The maximum quantum efficiency of Photosystem II (Fv/Fm), a chlorophyll fluorescence measurement parameter, was strongly positively correlated with the monthly average temperature (1-year-old seedling: r=0.8779, 2-year-old seedling: r=0.8605, 3-year-old seedling: r=0.8697, 5-year-old seedlings: r=0.8085, and 6-year-old seedlings: r=0.8316). The Fv/Fm values were the lowest in winter (November 2020-March 2021). In addition, the Fv/Fm values of 1-, 2-, and 3-year-old seedlings in winter were lower than that of 5- and 6-year-old seedlings, while the Fv/Fm values in summer were relatively higher than those in winter. Further, the Fv/Fm values of seedlings of all ages decreased in August 2020, when the monthly average temperature was the highest. In particular, 1-year-old to 3-year-old seedlings showed Fv/Fm values less than 0.8. Further, the photosynthetic capacity measured in August 2020 increased with increasing seedling age. The analysis of variance results for summer Fv/Fm values showed significant differences in age-specific averages (p<0.05), and Duncan's multiple range test showed significant differences between 5- and 6-year-old seedlings and 1-, 2-, and 3-year-old seedlings (p<0.05). These results suggested that the 5- and 6-year-old seedlings were less sensitive to environmental stress and showed better photosynthetic capacity than the 1-, 2-, and 3-year-old seedlings. Therefore, 5-year-old or older A. koreana seedlings can be used as restoration materials because they can show increased adaptability and stable growth during transplantation due to their relatively high environmental resistance and photosynthetic capacity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.1
• /
• pp.60-71
• /
• 2019

Electrical power supply is needed to operate the radar system in the field. In addition, it should not cause performance deterioration under the environmental factors due to characteristics of military equipment, and should not cause malfunction due to electromagnetic waves generated in radar, and then should not cause malfunction in radar equipment. Therefore, By applying a permanent magnet to the rotor of the generator, light weighting and high efficiency of generator were achieved. As a result, electrical performance test of the generator, the rated output power was 80.8 kW, the maximum output power was 88.1 kW, and the output power efficiency was 98.1 % under the full load condition. When the load capacity of the generator was changed from no load to full load, the maximum voltage variation was 3.6 % and the frequency variation was 0.3 %. As a result of the transient response test for measuring the output power of the generator according to the load characteristics change, the maximum voltage variation of 7.9 %, frequency variation of 0.5 % were confirmed, and the transient response time was 2.1 seconds. Environmental tests were conducted in accordance with MIL-STD-810G and MIL-STD-461F to evaluate the operability of the generator groups. Normal operation of radar system generator group was confirmed under high temperature and low temperature environment conditions. Electromagnetic tests were conducted to check if electromagnetic wave generated from both radar system and generator group in operation caused any performance deterioration to each other. As a result, it was confirmed that the performance deterioration due to electromagnetic wave inflow, radiation, and conduction did not occur. It is expected that it should be possible to provide high efficiency power supply and stable power supply by applying to various military system as well as radar system.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.3
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.

• Fire Science and Engineering
• /
• v.27 no.6
• /
• pp.50-56
• /
• 2013

The radiation effects on the auto-ignition and extinction characteristics of a non-premixed fuel-air counterflow field were numerically investigated. A detailed reaction mechanism of GRI-v3.0 was used for the calculation of chemical reactions and the optically-thin radiation model was adopted in the simulations. The flame-controlling continuation method was also used in the simulation to predict the auto-ignition point and extinction limits precisely. As a result, it was found that the maximum H radical concentration, $(Y_H)_{max}$, rather than the maximum temperature was suitable to understand the ignition and extinction behaviors. S-, C- and O-curves, which were well known from the previous theory, were identified by investigating the $(Y_H)_{max}$. The radiative heat loss fraction ($f_r$) and spatially-integrated heat release rate (IHRR) were introduced to grasp each extinction mechanism. It was also found that the $f_r$ was the highest at the radiative extinction limit. At the flame stretch extinction limit, the flame was extinguished due to the conductive heat loss which attributed to the high strain rate although the heat release rate was the highest. The radiation affected on the radiative extinction limit and auto-ignition point considerably, however the effect on the flame stretch extinction limit was negligible. A stable flame regime defined by the region between each extinction limit became wide with increasing the fuel temperature.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.440-447
• /
• 2004

Characteristics of human ${\beta}-carotene$ 15,15'-dioxygenase isolated by recombinant DNA technology was elucidated. Optimal pH and temperature were 9.0 and $40^{\circ}C$, respectively. Enzyme activity was temperature-sensitive. Enzyme was stable at pH 6.0-9.0 for 24 hr and under $5^{\circ}C$. Half-life of enzyme at $35^{\circ}C$ was 40 min. Crude preparations of enzyme were inhibited by ferrous ion-chelating agent and sulfhydryl-binding agent. GSH offsets inhibitory effect of PCMB. With increasing substrate concentrations, enzyme activity gave typical Michaelis-Menten curve, Based on Hanes-Woolf plot of data, $K_{m}\;and\;V_{max$ were $3.39{\times}10^{6}\;M\;and\;1.2\;pmol/mg$ protein/min, respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.95-104
• /
• 2005

Effects of the aluminum melting temperature, melting time and a kind of flux agents on the distribution of surrogate nuclide were investigated in the electric furnace at the aluminum melting including surrogate radionuclides(Co, Cs, Sr) in order to establish the fundamental research of the melting technology for the metallic wastes from the decommissioning of the TRIGA research reactor. It was verified that the fluidity of aluminum melt was increased by adding flux agent but it was slightly varied according to the sort of flux agents. The results of the XRD analysis showed that the surrogate nuclides move into the slag phase and then they were combined with aluminum oxide to form more stable compound. The weight of the slag generated from aluminum melting test increased with increasing melting temperature and melting time and the increase rate of the slag depended on the kind of flux agents added in the aluminum waste. The concentration of the cobalt in the ingot phase decreased with increasing reaction temperature but it increased in the slag phase up to 90$\%$according to the experimental conditions. The volatile nuclides such as Cs and Sr considerably transferred from the ingot phase to the slag and dust phase.