• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.753-761
• /
• 1990

The physicochemical properties of starches from aerial and subterranean tuber of yam were compared with those of rice and sweet potato. Aerial tuber yam contained higher level of amylose than others, whereas water binding capacity, swelling power and solubility was highest in subterranean tuber yam starch. Brabender amylograms of 5% starch suspensions indicated that the initial pasting temperature of yam starches were slightly higher than that of rice and sweet potato starches, the maximum viscosities of starches from subterranean and aerial tuber yam were 860 and 590 B.U., respectively. Yam starches were more difficult to hydrolyze by ${\alpha}-amylase$ than rice and sweet potato starches. ${\beta}-Amylolysis\;limit$ for yam starches and their amylose and amylopectin were higher than rice and sweet potato starches. The elution profiles of starches on Sepharose CL-2B were different from each other but they were similar between yam starches. Incomplete debranched fractions in the aerial tuber yam amylopectin was particularly higher than other samples. The weight ratio of short chains to long chains for debranched amylopectins was the lowest in aerial tuber yam.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.52-58
• /
• 2020

Electrochemical characterization and thermal stability were investigated for MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ cathode. The ratio of MgF₂ was controlled by 0.5, 1, 3 wt%. Cyclic voltammetry, charge-discharge profiles, rate capability, cycle life were measured for electrochemical properties. DSC analysis was measured for thermal stability. The first discharge capacities of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ were decreased at 0.1C-rate compared to pristine LiNi_0.8Co_0.15Al_0.05O₂. But the rate capability and cycle life of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ were improved at 2C-rate. In DSC analysis result, the exothermic temperature of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ was increased and peak height was decreased.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.4
• /
• pp.321-329
• /
• 1993

The present study was conducted to elucidate the body modulating function of fermented seafood products. Angiotensin converting enzyme (ACE) acts in blood pressure regulation, converting angiotensin I to the potent vasoconstrictor angiotensin II and inactivating the vasodilator bradykinin to raise blood pressure. Salted and fermented anchovy which is one of the traditional fermented seafood in Korea was tested for inhibitory activity against ACE. ACE inhibitory activity of salted anchovy during the period of fermentation was increased with the elapse of fermentation days until fermentation of 60 days, but thereafter decreased inversely. When the fermented product was extracted with $50\%$ ethanol, the ACE inhibitory activity was the highest. And the ACE inhibitory activity was proportion to the content of $50\%$ ethanol soluble peptide-nitrogen of the fermented product. From the profiles of gel permeation chromatography on a Bio-Gel P-2 of $50\%$ ethanol soluble fraction obtained from salted and fermented anchovy fermented for 60 days at an ambient temperature, the higher activity fractions were C'($IC_{50}=97{\mu}g\;protein/ml$) and D'($IC_{50}=65{\mu}g\;protein/ml$). Amino acid analysis showed that the large quantify of threonine, glutamic acid, lysine for C' and serine, proline for D', respectively.

• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.181-195
• /
• 2015

Algal blooms in lakes are one of major environmental issues in Korea. A three-dimensional, hydrodynamic and water quality model was developed and tested in Lake Euiam to assess the performance and limitations of numerical modeling with multiple algal groups using field data commonly collected for algal management. In this study, EFDC was adopted as the basic model framework. Simulated vertical profiles of water temperature, dissolved oxygen and nutrients monitored at five water quality monitoring stations from March to October 2013, which are closely related to algal dynamics simulation, showed good agreement with those of observed data. The overall spatio-temporal variations of three algal groups were reasonably simulated against the chlorophyll-a levels of those estimated from the limited monitoring data (chlorophyll-a level and cell numbers of algal species) with the RMSEs ranging from 2.6 to $17.5mg/m^3$. Also, note that $PO_4-P$ level in the water column was a key limiting factor controlling the growth of three algal groups during most of simulation period. However, the algal modeling results were not fully attainable to the levels of observation during short periods of time showing abrupt increase in algae throughout the lake. In particular, the green algae/cyanobacteria and diatom simulations were underestimated in late June to early July and early October, respectively. The results shows that better understanding of internal algal processes, neglected in most algal modeling studies, is necessary to predict the sudden algal blooms more accurately because the concentrations of external $PO_4-P$ and specific algal groups originated from the tributaries (mainly, dam water releases) during the periods were too low to fully capture the sharp rise of internal algal levels. In this respect, this study suggests that future modeling efforts should be focused on the quantification of internal cycling processes including vertical movement of algal species with respect to changes in environmental conditions to enhance the modeling performance on complex algal dynamics.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1187-1198
• /
• 2008

Many reservoirs in Korea and their downstream environments are under increased pressure for water utilization and ecosystem management from longer discharge of turbid flood runoff compared to a natural river system. Turbidity($C_T$) is an indirect measurement of water 'cloudiness' and has been widely used as an important indicator of water quality and environmental "health". However, $C_T$ modeling studies have been rare due to lack of experimental data that are necessary for model validation. The objective of this study is to validate a coupled three-dimensional(3D) hydrodynamic and particle dynamics model (ELCOM-CAEDYM) for the simulation of turbid density flows in stratified Daecheong Reservoir using extensive field data. Three different groups of suspended solids (SS) classified by the particle size were used as model state variables, and their site-specific SS-$C_T$ relationships were used for the conversion between field measurements ($C_T$) and state variables (SS). The simulation results were validated by comparing vertical profiles of temperature and turbidity measured at monitoring stations of Haenam(R3) and Dam(R4) in 2004. The model showed good performance in reproducing the reservoir thermal structure and propagation of stream density flow, and the magnitude and distribution of turbidity in the reservoir were consistent with the field data. The 3D model and turbidity modeling framework suggested in this study can be used as a supportive tool for the best management of turbidity flow in other reservoirs that have similar turbidity problems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.133-133
• /
• 2008

Recently, as the down-scailing of field-effect transistor devices continues, Schottky-barrier field-effect transistors (SB-FETs) have attracted much attention as an alternative to conventional MOSFETs. SB-FETs have advantages over conventional devices, such as low parasitic source/drain resistance due to their metallic characteristics, low temperature processing for source/drain formation and physical scalability to the sub-10nm regime. The good scalability of SB-FETs is due to their metallic characteristics of source/drain, which leads to the low resistance and the atomically abrupt junctions at metal (silicide)-silicon interface. Nevertheless, some reports show that SB-FETs suffer from short channel effect (SCE) that would cause severe problems in the sub 20nm regime.[Ouyang et al. IEEE Trans. Electron Devices 53, 8, 1732 (2007)] Because source/drain barriers induce a depletion region, it is possible that the barriers are overlapped in short channel SB-FETs. In order to analyze the SCE of SB-FETs, we carried out systematic studies on the Schottky barrier overlapping in short channel SB-FETs using a SILVACO ATLAS numerical simulator. We have investigated the variation of surface channel band profiles depending on the doping, barrier height and the effective channel length using 2D simulation. Because the source/drain depletion regions start to be overlapped each other in the condition of the $L_{ch}$~80nm with $N_D{\sim}1\times10^{18}cm^{-3}$ and $\phi_{Bn}$ $\approx$ 0.6eV, the band profile varies as the decrease of effective channel length $L_{ch}$. With the $L_{ch}$~80nm as a starting point, the built-in potential of source/drain schottky contacts gradually decreases as the decrease of $L_{ch}$, then the conduction and valence band edges are consequently flattened at $L_{ch}$~5nm. These results may allow us to understand the performance related interdependent parameters in nanoscale SB-FETs such as channel length, the barrier height and channel doping.

• Journal of Ginseng Research
• /
• v.42 no.3
• /
• pp.270-276
• /
• 2018

Background: Notoginsenoside Ft1 is a promising potential candidate for cardiovascular and cancer disease therapy owing to its positive pharmacological activities. However, the yield of Ft1 is ultralow utilizing reported methods. Herein, an acid hydrolyzing strategy was implemented in the acquirement of rare notoginsenoside Ft1. Methods: Chemical profiles were identified by ultraperformance liquid chromatography coupled with quadruple-time-of-flight and electrospray ionization mass spectrometry (UPLC-Q/TOF-ESI-MS). The acid hydrolyzing dynamic changes of chemical compositions and the possible transformation pathways of saponins were monitored by ultrahigh-performance LC coupled with tandem MS (UHPLC-MS/ MS). Results and conclusion: Notoginsenoside Ft1 was epimerized from notoginsenoside ST4, which was generated through cleaving the carbohydrate side chains at C-20 of notoginsenosides Fa and Fc, and vinaginsenoside R7, and further converted to other compounds via hydroxylation at C-25 or hydrolysis of the carbohydrate side chains at C-3 under the acid conditions. High temperature contributed to the hydroxylation reaction at C-25 and 25% acetic acid concentration was conducive to the preparation of notoginsenoside Ft1. C-20 epimers of notoginsenoside Ft1 and ST4 were successfully separated utilizing solvent method of acetic acid solution. The theoretical preparation yield rate of notoginsenoside Ft1 was about 1.8%, which would be beneficial to further study on its bioactivities and clinical application.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1350-1356
• /
• 1998

An attempt was made to investigate the effects of additives (3%) such as egg white, soybean protein, corn starch and Read Amity-N (green bean starch 85%+psyllium husk 10%) on the thermal properties and gel structures of mackerel surimi and to examine the quality of surimi by using differential scanning calorimetry (DSC), rheometry and scanning electron microscopy (SEM). The thermal transition temperatures of mackerel surimi protein were 40, 52, 67 and $79^{\circ}C$ after those temperatures were changed to 37, 46, 57 and $76^{\circ}C$ after adding salt (3% NaCl). Addition of Read Amity-N and corn starch to surimi showed new peak at the temperature of $90^{\circ}C\;and\;92^{\circ}C$, respectively. The enhancing effects of gel strengths of mackerel surimi cooked gels prepared from adding four kinds of additives, respectively, were egg white > soybean protein > Read Amity-N > corn starch in order. Scanning electron microscopy showed a difference in fine structures between the cooked gels which were prepared with and without additives. Dispersion profiles of protein were more thick in cooked gel prepared with additive than in cooked gel prepared without additive.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.702-710
• /
• 2013

Zaltoprofen loaded polyoxalate (POX) microspheres were prepared by an emulsion solvent-evaporation/extraction method like oil-in-water (O/W) for sustained release of zaltoprofen. The influence of several preparation parameters such as fabrication temperature, stirring speed, intensity of the sonication, initial drug ratio, molecular weight ($M_w$) of POX, concentration of POX and concentration of emulsifier has been investigated on the zaltoprofen release profiles. Physicochemical properties and morphology of zaltoprofen loaded POX microspheres were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR). Through the analyzed results, it was demonstrated that the characteristics of the microspheres greatly affected by the prepared condition. The releases behavior of zaltoprofen was investigated for 10 days in vitro. It was confirmed that the release behavior of zaltoprofen can be controlled by the manufacturing factor of solvent-evaporation/extraction method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.1-11
• /
• 2016

The effect of the migration of nanoparticles near the wall of a channel on the convective heat transfer in a laminar flow of $SiO_2$ nanoparticle suspensions (nanofluids) under constant wall heat flux boundary conditions was numerically and experimentally investigated in this study. The dynamic thermal conductivity of the aqueous $SiO_2$ nanofluids was measured using T-type thermocouples attached to the outer surface of a stainless steel circular tube (with a length of 1 m and diameter of 1.75 mm). The nanofluids used in this study were synthesized by dispersing $SiO_2$ spherical nanoparticles with a diameter of 24 nm in de-ionized water (DIW). The enhancement of the thermal conductivity of the nanofluids (e.g., an increase of up to 7.9 %) was demonstrated by comparing the temperature profiles in the flow of the nanofluids with that in the flow of the basefluids (i.e., DIW). However, this trend was not demonstrated in the computational analysis, because the numerical models were based on continuum assumptions and flow features involving nanoparticles in a stable colloidal solution. Thus, to explore the non-continuum effects, such as the modification of the morphology caused by nanoparticle-wall interactions on the heat exchanging surfaces (e.g., the isolated and dispersed precipitation of the nanoparticles), additional experiments were performed using DIW right after the measurements using the nanofluids.