• 제목/요약/키워드: temperature mapping

검색결과 232건 처리시간 0.028초

TerraSAR-X 영상으로부터 Modified U-NET을 이용한 홍수 매핑 (Flood Mapping Using Modified U-NET from TerraSAR-X Images)

  • 유진우;윤영웅;이어루;백원경;정형섭
    • 대한원격탐사학회지
    • /
    • 제38권6_2호
    • /
    • pp.1709-1722
    • /
    • 2022
  • 지구온난화로 인해 발생한 기온 상승은 엘니뇨, 라니냐 현상을 초래하였고, 해수의 온도를 비정상적으로 변화시켰다. 해수 온도의 비정상적인 변화는 특정 지역에 강우가 집중되는 현상을 발생시켜 이상 홍수를 빈번하게 일으킨다. 홍수로 인한 인명 및 재산 피해를 복구하고 방지하기 위해서는 침수피해 지역을 신속하게 파악하는 것이 중요한데 이는 합성개구레이더(synthetic aperture radar, SAR)를 통해 가능하다. 본 연구에서는 멀티 커널(kernel) 기반의 수정된 U-NET과 TerraSAR-X 영상을 활용하여 다양한 특성 맵 추출을 통해 반전 잡음(speckle noise)의 효과를 저감하고, 홍수 전, 후의 두 장의 영상을 입력자료로 활용해 홍수 발생 지역을 직접적으로 도출해내는 모델을 제작하고자 한다. 이를 위해 두 장의 SAR 영상을 전처리하여 모델의 입력자료를 제작하였고, 이를 수정된 U-NET 구조에 적용하여 홍수 탐지 딥러닝 모델을 학습시켰다. 해당 방법을 통해 평균 F1 score 값이 0.966으로 높은 수준으로 홍수 발생 지역을 탐지할 수 있었다. 이 결과는 수해 지역에 대한 신속한 복구 및 수해 예방책 도출에 기여할 것으로 기대된다.

날씨와 식사 선택의 관계: 한국대학 캠퍼스 내 식당과 카페의 사례연구 (The Relationship between Weather and Meal choices: A Case Study of Restaurants and Cafés on Korean University Campus)

  • 담잠랏시 뿐요타이;이용기
    • 서비스연구
    • /
    • 제12권4호
    • /
    • pp.82-93
    • /
    • 2022
  • 외식서비스산업은 지속가능한 세계 식품 소비의 주요 원동력이다. 외식소비행동을 이해함으로써, 식당 관리자들은 수요를 예측하고 소비 전(前)단계에서 음식 낭비를 줄일 수 있다. 본 연구는 식당과 카페의 영향요인과 고객 수 간의 관계를 조사한다. 이러한 요인들은 비와 기온을 포함한 날씨와 관련된 요인들과 시험 기간과 요일을 포함한 학교 관련 요인들이다. 이 네 가지 요인에 기초하여 가능한 조합은 24개였다. 각 평일 조합에 대해서는 3가지 요일을 대표일로 정하였다. 각 주말 조합에 대해서는 1가지 요일을 대표일로 정하였다. 일 년 중 총 48일이 표본으로 추출되었다. 고객 자료는 한국의 한 대학 캠퍼스에 있는 6개의 식당과 카페에서 수집되었다. 고객 수에 대한 각 변수의 상대적 중요도를 결정하기 위해 컨조인트 분석(Conjoint Analysis)이 사용되었다. 이어 효용 값 (Utility Score)를 표준화하여 고객 수가 최고점에 도달했을 때 최적의 상태를 찾도록 매핑 (Mapping) 하였다. 또한 피어슨 상관 계수(Pearson's Correlation Coefficient)를 사용하여 각 점포의 매출을 비교하였다. 본 연구 결과는 온도와 비의 영향이 고객 수와 상관관계가 있다는 것을 뒷받침하였다. 또한, 고객 수를 예측하는 데 있어서 온도가 비보다 훨씬 더 중요하다는 것이 발견되었다. 본 논문은 식음료 수요를 예측하고 식사 선택을 예측하기 위해 날씨를 사용하는 것의 시사점에 대해 논의하였다.

최저기온과 휴면심도 기반의 동해위험도를 활용한 'Campbell Early' 포도의 내동성 지도 제작 (Plant Hardiness Zone Mapping Based on a Combined Risk Analysis Using Dormancy Depth Index and Low Temperature Extremes - A Case Study with "Campbell Early" Grapevine -)

  • 정유란;김수옥;윤진일
    • 한국농림기상학회지
    • /
    • 제10권4호
    • /
    • pp.121-131
    • /
    • 2008
  • 본 연구에서는 국가표준 시나리오 A1B와 A2 조건에서 예상되는 2071-2100 평년의 최저기온 예상도와, 휴면심도로부터 추정한 단기내동성 분포도에 근거하여, 남한 전역에 대해 사방 270m 간격으로 경관규모의 국지적인 동해위험 정도를 분석함으로써 현재 평년(1971-2000)에 비해 어떤 결과를 보일지 예측하고자 하였다. 실험에 필요한 270m 해상도의 일별 기온자료와 1월 최저기온자료는 농림수산식품부의 전자기후도 및 그 파생산물, 그리고 국립기상연구소의 기후시나리오자료를 이용하여 준비하였다. 대상작물로서 'Campbell Early' 포도를 선정하고 현재와 미래 평년에 대해 각각 휴면심도를 계산하여 비교한 결과, 단기내동성 유지면적(휴면심도 -150 이하)과 저온내습지역($-15^{\circ}$ 이하)은 두 가지 시나리오 모두 미래기후 조건에서 동시에 줄어들었다. 기온과 휴면심도 두 요인을 종합해 분석해보면 현재 평년에 비해 100년 후 미래 평년에 동해위험이 감소하는 지역은 증가하는 지역보다 더 늘어나므로 포도재배에 있어서 저온피해의 위협은 감소할 것이다. 하지만 피해율 30% 이하의 월동 안전지역의 면적이 현재 평년의 59%에서 미래에는 55% (A1B)${\sim}$63% (A2)로서 뚜렷이 증가하지 않으며, 피해율 70% 이상의 월동 위험지역의 면적은 오히려 현재 평년의 13%에서 미래에는 23% (A1B)${\sim}$25% (A2)로 크게 증가할 것으로 예측되었다. 본 연구에서 사용된 전자기후도에 근거한 동해위험도 분석기술은 국내 주요 과수품종에 적용할 수 있으므로 재배적지의 재배치 등 기후변화대과 수산업분야 적응전략 마련에 유용하게 쓰일 수 있을 것이다.

볼 밀링 후 방전플라즈마 소결법에 의해 제조된 MgB2의 상 분석 (The Phase Analysis of MgB2 Fabricated by Spark Plasma Sintering after Ball Milling)

  • 강득균;최성현;안인섭
    • 한국분말재료학회지
    • /
    • 제15권5호
    • /
    • pp.371-377
    • /
    • 2008
  • This paper deals with the phase analysis of $MgB_2$ bulk using spark plasma sintering process after ball milling. Mg and amorphous B powders were used as raw materials, and milled by planetary-mill for 9 hours at argon atmosphere. In order to confirm formation of $MgB_2$ phase, DTA and XRD were used. The milled powders were fabricated to $MgB_2$ bulk at the various temperatures by Spark Plasma Sintering. The fabricated $MgB_2$ bulk was evaluated with XRD, EDS, FE-SEM and PPMS. In the DTA result, reaction on formation of $MgB_2$ phase started at $340^{\circ}C$. This means that ball milling process improves reactivity on formation of $MgB_2$ phase. The $MgB_2$ MgO and FeB phases were characterized from XRD result. MgO and FeB were undesirable phases which affect formation of $MgB_2$ phase, and it's distribution could be confirmed from EDS mapping result. Spark Plasma Sintered sample for 5 min at $700^{\circ}C$ was relatively densified and it's density and transition temperature showing super conducting property were $1.87\;g/cm^3$ and 21K.

Enhanced Electrical Conductivity of Gold Doped Graphene Films by Microwave Treatment

  • Kim, Yoo-Seok;Song, Woo-Seok;Cha, Myoung-Jun;Lee, Su-Il;Cho, Ju-Mi;Kim, Sung-Hwan;Park, Chong-Yun
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.188-188
    • /
    • 2012
  • Graphene, with its unique physical and structural properties, has recently become a proving ground for various physical phenomena, and is a promising candidate for a variety of electronic device and flexible display applications. Compared to indium tin oxide (ITO) electrodes, which have a typical sheet resistance of ${\sim}60{\Omega}$/sq and ~85% transmittance in the visible range, the chemical vapor deposition (CVD) synthesized graphene electrodes have a higher transmittance in the visible to IR region and are more robust under bending. Nevertheless, the lowest sheet resistance of the currently available CVD graphene electrodes is higher than that of ITO. In this study, we report a creative strategy, irradiation of microwave at room temperature under vacuum, for obtaining size-homogeneous gold nano-particle doping on graphene. The gold nano-particlization promoted by microwave irradiation was investigated by transmission electron microscopy, electron energy loss spectroscopy elemental mapping. These results clearly revealed that gold nanoparticle with ${\geq}30$ nm in mean size were decorated along the surface of the graphene after microwave irradiation. The fabrication high-performance transparent conducting film with optimized doping condition showed a sheet resistance of ${\geq}100{\Omega}$/sq. at ~90% transmittance. This approach advances the numerous applications of graphene films as transparent conducting electrodes.

  • PDF

Development of an efficient genotyping-by-sequencing (GBS) library construction method for genomic analysis of grapevine

  • Jang, Hyun A;Oh, Sang-Keun
    • 농업과학연구
    • /
    • 제44권4호
    • /
    • pp.495-503
    • /
    • 2017
  • Genotyping-by-sequencing (GBS) is an outstanding technology for genotyping and single nucleotide polymorphism (SNP) discovery compared to next generation sequencing (NGS) because it can save time when analyzing large-scale samples and carries a low cost per sample. Recently, studies using GBS have been conducted on major crops and, to a greater extent, on fruit crops. However, many researchers have some problems due to low GBS efficiency resulting from low quality GBS libraries. To overcome this limitation, we developed an efficient GBS library construction method that regulates important conditions such as restriction enzymes (RE) digestion and a PCR procedure for grapevine. For RE digestion, DNA samples are digested with ApeKI (3.6U) at $75^{\circ}C$ for 5 hours and adapters are ligated to the ends of gDNA products. To produce suitable PCR fragments for sequencing, we modified the PCR amplification conditions; temperature cycling consisted of $72^{\circ}C$ (5 min), $98^{\circ}C$ (30 s), followed by 16 cycles of $98^{\circ}C$ (30 s), $65^{\circ}C$ (30 s), $72^{\circ}C$ (20 s) with a final extension step. As a result, we had obtained optimal library construct sizes (200 to 400 bp) for GBS analysis. Furthermore, it not only increased the mapping efficiency by approximately 10.17% compared to the previous method, but also produced mapped reads which were distributed equally on the19 chromosomes in the grape genome. Therefore, we suggest that this system can be used for various fruit crops and is expected to increase the efficiency of various genomic analysis performed.

Cu50-Fe50 합금의 제조 및 특성평가 (Fabrication and characterization of Cu50-Fe50 alloy)

  • 이정일;딜리람;팽종민;조현수;양수민;류정호
    • 한국결정성장학회지
    • /
    • 제28권4호
    • /
    • pp.175-178
    • /
    • 2018
  • 구리 금속은 높은 열전도도로 heat sink 혹은 heat exchanger로 널리 사용되고 있다. 그러나 이에 반하여 낮은 인장강도와 사용온도 한계를 가지고 있다. 따라서 높은 열전도도, 낮은 제작비와 함께 우수한 기계적 특성이 요구된다. 본 연구에서는 이를 위하여 동철합금($Cu_{50}-Fe_{50}$ alloy)를 고주파 가열로를 이용하여 제조하고 그 특성을 조사하였다. 제조된 동철합금은 Cu, ${\alpha}$-Fe, ${\gamma}$-Fe 결정구조를 기진 dendrite 미세구조를 보여주었다. 제조된 동철합금은 XRD, FE-SEM, EDS 및 XRF를 이용하여 결정구조 및 미세구조를 분석하였으며 전력공급 접점용 소재로서의 적합성을 확인하고자 하였다.

광역스케일의 환경 인자를 이용한 어류, 식물, 조류 종수의 공간적 분포에 대한 모델링 - 일본의 주요수계를 중심으로 - (Modelling of a Spatial Distribution of the Species Richness of Fishes, Plants, and Birds Using Environmental Factors on a Wide-Ranging Scale1 - Focusing on the Major Drainage Systems in Japan -)

  • 한미덕;이기배
    • 한국환경생태학회지
    • /
    • 제22권4호
    • /
    • pp.347-355
    • /
    • 2008
  • 본 연구에서는 1990$\sim$2005년 사이에 일본전국의 109개의 주요하천유역에서 조사된 어류, 식물, 조류 데이터를 이용하여, 각 생물종의 종수와 기후 및 지형의 환경인자와의 관계를 분석하고 모델링을 수행하였다. 그 결과, 어류, 식물, 조류의 분포는 각각 연평균 기온, 유역면적, 연간 강수량에 의해서 가장 많은 부분이 설명되었다. 또한, 광범위 스케일에서의 환경인자데이터를 이용한 각 생물종에 대한 일반화가법모델을 이용하여 일본전국의 하천유역의 각 생물 종수의 값을 예측하고 그 값을 지도화하였다. 예측값을 지도화하는 것은 관리자가 생물종의 다양성을 확보하기 위해서 보호해야할 지역을 새롭게 설정하거나, 생물다양성 보호지역의 유효성을 평가하는데 활용될 수 있다.

Water vapor in high-mass star-forming regions and PDRs: the Herschel/HIFI view

  • Choi, Yunhee;van der Tak, Floris F.S.;van Dishoeck, Ewine F.;Bergin, Edwin A.
    • 천문학회보
    • /
    • 제40권2호
    • /
    • pp.42.2-43
    • /
    • 2015
  • Massive stars play a major role in the interstellar energy budget and the shaping of the galactic environment. The water molecule is thought to be a sensitive tracer of physical conditions and dynamics in star-forming regions because of its large abundance variations between hot and cold regions. Herschel/HIFI allows us to observe the multiple rotational transitions of H2O including the ground-state levels, and its isotopologues toward high-mass star-forming regions in different evolutionary stages. Photodissociation regions (PDRs) are also targeted to investigate the distribution of water and its chemistry. We present line profiles and maps of H2O using data from two guaranteed-time key programs "Water In Star-forming regions with Herschel" and "Herschel observations of EXtra-Ordinary Sources". We analyze the temperature and density structures using LTE and non-LTE methods. We also estimate turbulent and expansion velocities, and abundance of water in the inner and outer envelopes using the 1D radiative transfer code. Around high-mass protostars we find H2O abundances of ~10-8-10-9 for the outer envelope and ~10-4-10-5 for the inner envelope, and expansion and turbulent velocities range from 1.0 km s-1 to 2.0 km s-1. The abundances and kinematic parameters of the sources do not show clear trends with evolutionary indicators. The Herschel/HIFI mapping observations of H2O toward the Orion Bar PDR show that H2O emission peaks between the shielded dense gas and the radicals position, in agreement with the theoretical and the observational PDR structure. The derived H2O abundance is ~10-7 and peaks at the depth of AV ~8 mag from the ionization front. Together with the low ortho-to-para ratio of H2O (~1) presented by Choi et al. (2014), our results show that the chemistry of water in the Orion Bar is dominated by photodesorption and photodissociation.

  • PDF

에어로졸 증착법(Aerosol Depostion method)에 의한 $Ba(Zr_{0.85}Y_{0.15})O_{3-\delta}$-NI 수소분리막 제조 ($Ba(Zr_{0.85}Y_{0.15})O_{3-\delta}$-NI Composite Membrane for Hydrogen Separation by Aerosol Deposition Method)

  • 박영수;최진섭;변명섭;김진호;황광택
    • 한국수소및신에너지학회논문집
    • /
    • 제21권4호
    • /
    • pp.271-277
    • /
    • 2010
  • $(Ba(Zr_{0.85}Y_{0.15})O_{3-\delta})$ oxide, showing high protonic conductivity at high temperatures and good chemical stability with $CO_2$ are referred to as hydrogen separation membrane. For high efficiency of hydrogen separation ($H_2$ flux and selectivity) and low fabrication cost, ultimate thin and dense BZY-Ni layer has to be coated on a porous substrate such as $ZrO_2$. Aerosol depostion (AD) process is a novel technique to grow ceramic film with high density and nano-crystal structure at room-temperature, and may be applicable to the fabrication process of AD integration ceramic layer effectively. XRD, SEM, X-ray mapping measurements were conducted in order to analyze the characteristics of BZY-Ni membrane fabricated by AD process. it is observed that it is homogeneous distribution for BZY-Ni. The result of $H_2$ permeation rate suggests that BZY-Ni composite is higher than BZY.