• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.317-322
• /
• 2007

The purpose of this study was to investigate the antibacterial effect of films on shelf-life and microbiological safety of mackerel. Effects of antimicrobial films against total aerobic bacteria, Escherichia coli O157:H7, Listeria monocytogenes, Vibrio parahaemolyticus in mackerel were evaluated during storage of 5-14 days at $5^{\circ}C,\;10^{\circ}C\;and\;15^{\circ}C$. Antimicrobial films were developed with addition of a natural substance, wasabi extracts (Wasabia japonica). At $5^{\circ}C$ storage, growth of total aerobic bacteria, Escherichia coli O157:H7, Listeria monocytogenes were inhibited higher than at 10 and $15^{\circ}C$. Especially, the numbers of V. parahaemolyticus were decreased gradually at $5^{\circ}C$ even in the control sample, and about $1\;log_{10}cfu/g\;and\;1.8\;log_{10}cfu/g$ reductions were observed at 1 and 4 days, respectively. After 7 days, V. parahaemolyticus in all samples were not detected. There is a limit of a single treatment of antimicrobial film to prolong shelf-life of mackerel. The synergistic effect of antimicrobial film were shown by addition of $5^{\circ}C$ refrigeration.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.243-247
• /
• 2007

A selective analytical method of headspace-GC/MS has been applied to determine levels of benzene in beverages. Food samples were 85 including 2 fruit juices, 6 fruit beverages, 11 carbonated beverages, 55 mixed beverages, and 4 beverage concentrations, and 7 extracted beverages. For phase equilibration of headspace, sample was stirred at $40^{\circ}C$ for 30 min. The oven temperature was $60^{\circ}C$ and elevated to $180^{\circ}C$ at $15^{\circ}C/min$. The internal standard was benzene-d6. The identification was done by the selected target ions such as m/z 51, 77, and 78 and the confirmation was done by the response ratio of m/z 77 to m/z 78 between sample and standard. The overall recoveries were ranged from 91% to 101% and the limit of quantification was $1{\mu}g/kg$. The average level of benzene were $5{\mu}g/kg$ for fruit beverages, $2{\mu}g/kg$ for carbonated beverages, $7{\mu}g/kg$ for mixed beverages and $7{\mu}g/kg$ for extracted beverages.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.423-429
• /
• 2005

A selective and sensitive reversed-phase HPLC method for the determination of fenoprofen in human serum was developed, validated, and applied to the pharmacokinetic study of fenoprofen calcium. Fenoprofen and internal standard, ketoprofen, were extracted from human serum by liquid-liquid extraction with diethyl ether and analyzed on a Luna C18(2) column with the mobile phase of acetonitrile-3 mM potassium dihydrogen phosphate (32:68, v/v, adjusted to pH 6.6 with phosphoric acid). Detection wavelength of 272 nm and flow rate of 0.25 mL/min were fixed for the study. The assay robustness for the changes of mobile phase pH, organic solvent content, and flow rate was confirmed by $3^{3}$ factorial design using a fixed fenoprofen concentration $(2\;{\mu}g/mL)$ with respect to its peak area and retention time. And also, the ruggedness of this method was investigated at three different laboratories using same quality control (QC) samples. This method showed linear response over the concentration range of $0.05-100\;{\mu}g/mL$ with correlation coefficients greater than 0.999. The lower limit of quantification using 1 mL of serum was $0.05\;{\mu}g/mL$, which was sensitive enough for pharmacokinetic studies. The overall accuracy of the quality control samples ranged from 92.27 to 109.20% for fenoprofen with overall precision (% C.V.) being 5.51-11.71 %. The relative mean recovery of fenoprofen for human serum was 81.7%. Stability (freeze-thaw, short and long-term) studies showed that fenoprofen was not stable during storage. But, extracted serum sample and stock solution were allowed to stand at ambient temperature for 12 hr prior to injection without affecting the quantification. The peak area and retention time of fenoprofen were not significantly affected by the changes of mobile phase pH, organic solvent content, and flow rate under the conditions studied. This method showed good ruggedness (within 15% C.V.) and was successfully used for the analysis of fenoprofen in human serum samples for the pharmacokinetic studies of orally administered Fenopron tablet (600 mg as fenoprofen) at three different laboratories, demonstrating the suitability of the method.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.12 no.4
• /
• pp.287-297
• /
• 2014

For several decades, many countries operating nuclear power plants have been studying the various disposal alternatives to dispose of the spent nuclear fuel or high-level radioactive waste safely. In this paper, as a direct disposal of spent nuclear fuels for deep geological disposal concept, the rod consolidation from spent fuel assembly for the disposal efficiency was considered and analyzed. To do this, a concept of spent fuel rod consolidation was described and the related concepts of disposal canister and disposal system were reviewed. With these concepts, several thermal analyses were carried out to determine whether the most important requirement of the temperature limit for a buffer material was satisfiedin designing an engineered barrier of a deep geological disposal system. Based on the results of thermal analyses, the deposition hole distance, disposal tunnel spacing and heat release area of a disposal canister were reviewed. And the unit disposal areas for each case were calculated and the disposal efficiencies were evaluated. This evaluation showed that the rod consolidation of spent nuclear fuel had no advantages in terms of disposal efficiency. In addition, the cooling time of spent nuclear fuels from nuclear power plant were reviewed. It showed that the disposal efficiency for the consolidated spent fuel rods could be improved in the case that cooling time was 70 years or more. But, the integrity of fuels and other conditions due to the longer term storage before disposal should be analyzed.

• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.119-126
• /
• 2011

Abstract: The amount of benzene, toluene, ethylbenzene, and o-xylene (BTEX) in 30 kinds of bottled waters purchased from market and 9 kinds of tap waters from home were determined using headspace solid phase microextraction (HS-SPME). The sample was stirred at 1200 RPM G for 4 min using a magnetic bar with $100\;{\mu}m$ PDMS as adsorbent for BTEX. Then it was desorbed from the fiber for 1 min at room temperature. Quantitation was achieved using standard calibration method. The limit of detection was determined as benzene 0.39 (${\pm}0.04$) ng/mL, toluene 0.08 (${\pm}0.04$) ng/mL, ethylbenzene 0.04 (${\pm}0.01$) ng/mL, and o-xylene 0.05 (${\pm}0.02$) ng/mL. Benzene and o-xylene were not detected in any samples, but toluene was detected in 11 samples, and ethylbenzene was detected just in 3 samples among 30 investigated bottled waters. The concentration range of investigated materials for toluene and o-xylene were $0.24({\pm}0.09)\sim2.95\;({\pm}0.08)\;ng/mL$, $0.08({\pm}0.06)\sim0.93({\pm}0.10)\;ng/mL$, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.2
• /
• pp.182-197
• /
• 1993

Algal community on the subtidal rocky zone of the South Sea of Korea was divided into two or three sequencing zones. The upper subtidal zone was characterized by the wave exposure-tolerant surf wrack(Pachymeniopsis, Gigartina), which formed dense swirling carpet. Its vertical range was from the surface to $3{\sim}5$ meters in depth, and more deeply extended in turbid waters including Sorido, Yokchido, Pijindo, Manjedo. The mid subtidal zone ranging from 5 to 25 meters in depth was characterized by a large brown algal forest (Ecklenia, Sargassum). But it was generally unrecognizable in that turbid waters, in which the vertical limit of vegetation was at most $10{\sim}15$ meters in depth. The low subtidal zone was characterized by a general lack of algal species and was not easily distinguished from the mid or sometimes from the upper zone. There was a distinct difference in abundance of vegetation between turbid waters and clear waters including Munsom, Kwantaldo, Yosodo, Hongdo, Ch'ujado. In turbid waters the vegetation was much poorer because the tubidity caused from the muddy sediment inhibited an algae to settle down and to grow up. On the basis of the phytogeographical methods using UPGMA, the 10 studied islands were classified into two groups, Munsom and the others. This floristic discontinuity between the two groups might be caused from the difference of water temperature.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.06a
• /
• pp.7-8
• /
• 2011

Basically, the lattice mismatch between film and substrate can make those BiFeO3(BFO) films distorted with strain structure. BFO phase can be stabilized on LaAlO3(LAO) represents the example of a multiferroic with giant axial ratio. Its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion and related to the rotation of the oxygen octahedra. In this study, we show that phases with a tetragonal-like epitaxial BFO films can indeed be ferroelectric and also can be stabilized via epitaxial growth onto LAO. Recent reports on epitaxial BFO films show that the crystal structure changes from nearly rhombohedral ("R-like") to nearly tetragonal("T-like") at strains exceeding approximately -4.5%, with the "T-like" structure being characterized by a highly enhanced c/a ratio. While both the "R-like" and the "T-like" phases are monoclinic, our detailed x-ray diffraction results reveal asymmetry change from MA and MC type, respectively. By applying additional strain or by modifying the unit cell volume of the film by substituting Ba for Bi, the monoclinic distortion in the "T-like" MC phase is reduced, i.e. the system approaches a true tetragonal symmetry. There are two different M-H loops for $Bi_{1-x}Ba_xFeO_{3-{\delta}}$(BBFO) and BFO films on SrTiO3(STO) & LAO substrates. Along with the ferroelectric characterization, these magnetic data indicate that the BFO phase stabilized on LAO represents the first example of a multiferroic with giant axial ratio. However, there is a significant difference between this phase and other predicted ferroelectrics with a giant axial ratio: its crystal structure is not strictly tetragonal, but tetragonal with a slight monoclinic distortion. Therefore, in going from bulk to highly-strained films, a phase sequence of rhombohedral(R)-to-monoclinic ["R-like" MA-to-monoclinic, "T-like" MC-to-tetragonal (T)] is observed. This sequence is otherwise seen only near morphotropic phase boundaries in lead-based solid-solution perovskites (i.e. near a compositionally induced phase instability), where it can be controlled by electric field, temperature, or composition. Our results show that this evolution can occur in a lead-free, stoichiometric material and can be induced by stress alone. Those major results are summarized as follows ; 1) Ba-doping increases the unit cell volume, 2) BBFO on LAO can be fully strained up to x=0.08 as a strain limit (Fig. 1), 3) P(E) & M(H) properties can be tuned by the variation of composition, strain, and film thickness.

• Journal of Environmental Health Sciences
• /
• v.31 no.1
• /
• pp.39-46
• /
• 2005

This study was performed to investigate the concentration of $PM_{10}$ and $PM_{2.5}$ in inside train and platform of subway 1, 2, 4 and 5 in Seoul, KOREA. $PM_{10}$, $PM_{2.5}$, temperature, humidity and carbon dioxide were monitored using Portable Aerosol Spectrometer at afternoon (between 13:00 and 16:00). The concentrations of $PM_{10}$ and $PM_{2.5}$ in inside train were monitored to be higher than those measured in platform. In addition, $PM_{10}$ concentration in both platform and inside train were found to be greatly higher than range of from 35 ${\mu}g/m^3$ to 81${\mu}g/m^3$ in ambient air reported by Ministry of Environment. This study found that there were many inside train in subway 1, 2, 4 line where exceeded 150 ${\mu}g/m^3$ of Korean PM10 standard. The average percentage that exceeded PM10 standard was 83.3% in line 1, 37.9% in line 2 and 63.1% in line 4, respectively. In particular, most of inside train in subway line 1 were over PM10 limit. PM2.5 concentration ranged from 77.7 ${\mu}g/m^3$ to 158.2 ${\mu}g/m^3$, which were found to be greatly higher than ambient air PM2.5 standard promulgated by United States Environmental Protection Agency (US-EPA) (24 hours arithmatic mean : 65 ${\mu}g/m^3$, year average : 15 ${\mu}g/m^3$). The percentage of $PM_{2.5}$ in $PM_{10}$ was 86.2% in platform, 81.7% in inside train, 80.2% in underground and 90.2% in ground. These results indicated that fine particles ($PM_{2.5}$) accounted for most of $PM_{10}$.

• Journal of Environmental Science International
• /
• v.26 no.5
• /
• pp.675-684
• /
• 2017

Provider-oriented weather information has been rapidly changing to become more customer-oriented and personalized. Given the increasing interest in wellness and health topics, the demand for health weather information, and biometeorology, also increased. However, research on changes in the human body according to weather conditions is still insufficient due to various constraints, and interdisciplinary research is also lacking. As part of an effort to change that, this study surveyed medical practitioners at an actual treatment site, using questionnaires, to investigate what kind of weather information they could utilize. Although there was a limit to the empirical awareness that medical staff had about weather information, most respondents noted that there is a correlation between disease and weather, with cardiovascular diseases (coronary artery disease (98.5%) and hypertension (95.9% ), skin diseases (atopic dermatitis (100%), sunburn (93.8%)) being the most common weather-sensitive ailments. Although there are subject-specific differences, most weather-sensitive diseases tend to be affected by temperature and humidity in general. Respiratory and skin diseases are affected by wind and solar radiation, respectively.

• Fire Science and Engineering
• /
• v.24 no.5
• /
• pp.50-59
• /
• 2010

Four fire scenarios, as the cases of fire sizes of 2 MW and 5 MW, and no installation and activation of atrium fire shutter for dormitory building of Daegu 'D college', were developed and fire simulations were run using FDS (ver. 5.5.0) and Pathfinder 2009 programs. By assessing fire and evacuation, the effects of atrium fire shutter and vents on the smoke control of atrium were evaluated and this study also analyzed fire hazard and egress safety for occupants in the dormitory. Fire shutter's preventing smoke transport around atrium was much effective, but smoke layer descended down the design limit of smoke height and kept about 2 m height from the atrium floor in all cases because flow rate through vents was not enough. For the case of 5 MW fire and no fire shutter, fire hazard was higher due to visibility than temperature and allowable egress time to stairwell was short less than 5 seconds for the occupants on the floors of 4F to 7F. For total occupants, egress time out of main doorway was calculated about 136 seconds. It is sure that additional systems improving the performance of smoke control need to be installed for more safe evacuation.