• 한국응용과학기술학회지
• /
• 제6권2호
• /
• pp.1-9
• /
• 1989

• 한국음향학회지
• /
• 제38권6호
• /
• pp.621-629
• /
• 2019

염분의 변화가 심한 황해의 해양환경 조건에서 정확한 해수음속을 산출하기 위한 논리적 방안을 제시하였다. 본 방안은 미항공우주국에서 개발한 Aqua 및 Soil Moisture Active Passive(SMAP)위성자료를 기반으로 하계절 30.5 psu 미만의 저염분수의 확장과 수온역전 현상 발생 위치를 식별하고 그 위치에 수심별 수온염분 측정센서인 Conductivity, Temperature, and Depth(CTD)가 탑재된 해양관측용 무인체계를 투입하여 음속이 적재적소에 정확히 측정하는 방안을 제시하였고 이의 원활한 수행을 위한 흐름도(flow chart)로 정리하였다. 본 방안을 통하여 염분의 변화폭이 증대되는 특이 해양환경을 조기에 식별하여 소모성 연직 수온 측정기인 Expandable Bathy Thermograph (XBT)로 음속을 계산할 때 정확도의 저하가 발생 되지 않도록 하였다.

• 한국군사과학기술학회지
• /
• 제24권5호
• /
• pp.482-491
• /
• 2021

It is obvious that understanding the effects of shallow water environment of Korea is very important to guarantee the optimal performance of active sonar such as monostatic and bistatic sonar. For this reason, in this paper, we analyzed the detection performance characteristics for various depth deployments of sonar in summer, winter and water temperature inversion environments, which environments are frequently observed in shallow water of Korea such as the Yellow sea. To analyze only effects of water temperature structures on target detection performance, we applied range independent conditions for bottom, sea surface and water temperature characteristics. To understand the characteristics of detection performance, we conducted transmission loss and signal excess modeling. From the results, we were able to confirm the characteristics of detection performance of active sonar. In addition, we verified that operation depth of transmitter and receiver affects the detection performance. Especially in the water temperature inversion environment, it was confirmed that the shadow zone could be minimized and the detection range could be increased through bistatic operation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1200-1203
• /
• 2002

A temperature compensated Crystal Oscillator is widely used for the stable frequency source of mobile communication equipments. Recently, it has become necessary to reduce power consumption of TCXOs. In this paper, we have proposed a TCXO using weak inversion MOS transistors and have evaluated its fundamental characteristics.

• Interaction and multiscale mechanics
• /
• 제3권1호
• /
• pp.81-94
• /
• 2010

The steady state response of a rotating generalized thermoelastic solid to a moving point load has been investigated. The transformed components of displacement, force stress and temperature distribution are obtained by using Fourier transformation. These components are then inverted and the results are obtained in the physical domain by applying a numerical inversion method. The numerical results are presented graphically for a particular model. A particular result is also deduced from the present investigation.

• Geomechanics and Engineering
• /
• 제19권1호
• /
• pp.29-36
• /
• 2019

The present research deals with the deformation in transversely isotropic thin circular thermoelastic rotating plate due to time-harmonic sources. Frequency effect in the presence of rotation and two temperature is studied under thermally insulated as well as isothermal boundaries. The Hankel transform technique is used to find a solution to the problem. The displacement components, stress components, and conductive temperature distribution with the radial distance are computed in the transformed domain and further calculated in the physical domain using numerical inversion techniques. Some specific cases are also figured out from the current research.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.332-336
• /
• 2007

Temperature is an essential process variable in nanoimprint lithography(NIL) where the temperature varies between room temperature and above the glass transition temperature. To simulate NIL process, we employ both the Nose-Poincare method for temperature controlled molecular dynamics(MD) and force field for polymer material i.e. polymethyl methacrylate(PMMA), which is most widely selected as NIL resist. Nose-Poincare method, which convinces the conservation of Hamiltonian structure and time-reversal symmetry, overcomes the drawbacks inherent in the conventional methods such as Nose thermostat and Nose-Hoover thermostat. Thus, this method exhibits enhanced numerical stability even when the temperature fluctuation is large. To describe PMMA, we adopt the force field which account for bond stretch, bending, torsion, inversion, partial charge, and van der Waals energy.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제22권1호
• /
• pp.24-32
• /
• 1994

A special upper-air observation including airsonde and pibal observations was performed to investigate the characteristics features of the vertical distribution of the meteorological elements over Taegu on a selected clear day of each season from October 1991 to August 1992. The diurnal and seasonal variations of the vertical profiles of air temperature and mixing ratio were obtained from airsonde observations and wind speed and direction from pibal observations. The results of these special upper-air observations are as follow : The diurnal variation of the vertical distribution of air temperature reveals the characteristic features associated with the atmospheric boundary layer. All case days, except for the summer season, show upper-level inversion layer which influenced by surface high, and surface inversion layer produced by radiative cooling. The diurnal variation of mixing ratio shows the maximum vale at 1500 LST in both the upper and low levels, and is larger on the lower level than the upper level. The mixing ratio of the lower level is larger than that of the upper level. On the average the mixing ratio decrease with the height, and is the wettest on the summer case day and the driest on the winter case day. The diurnal variation of the wind velocity and direction are variable in the lower level with time and height, while they are steady in the upper level. On the average, the wind direction is southerly or southeasterly for the summer case day, westerly or northwesterly for the spring and fall case days, and northerly or northwesterly for the winter case day.

• 한국식품영양과학회지
• /
• 제19권6호
• /
• pp.612-616
• /
• 1990

전상이 일어나기 직전의 W/O형 에멀젼에는 W/O형 에멀젼과 섞여 O/W/O 형 에멀젼이 생성한다는 것을 알았다. 그래서 W/O형 에멀젼 중에 분산된 O/W/O형 분산의 정도를 평가하기 위한 목적으로 시료 에멀젼(수상 :물, 유상 TGCR을 함유한 올리브유)을 원추 평판형 회전 점도계를 사용하여 전단속도 1.92-384sec$^{-1}$(온도 25$\pm$0.1$^{\circ}C$)에서 점도를 측정하고 이 값을 Mooney의 점도식에 대입하여 이론치와 실측치의 차로부터 O/W/O형 분산의 정도를 평가했다. O/W/O형 에멀젼의 생성은 전상 직전의 시료에서 높았고, 유화제인 TGCR의 농도가 낮을수록 O/W/O형 에멀젼의 생성이 증가되는 경향이 나타났다. 이러한 사실로부터 W/O형 에멀젼이 전상 직전 부근에서 이론적으로 설명할 수 없는 고점도 현상이 전상직전의 O/W/O형 에멀젼의 생성에 의해서도 일어날 가능성이 있다고 사료된다.

• 마이크로전자및패키징학회지
• /
• 제12권2호
• /
• pp.149-154
• /
• 2005

궁극적으로 게이트를 저저항 복합 실리사이드로 대체하는 가능성을 확인하기 위해 70 nm 두께의 폴리실리콘 위에 각 20nm의 Ni, Co를 열증착기로 적층순서를 달리하여 poly/Ni/Co, poly/Co/Ni구조를 만들었다. 쾌속열처리기를 이용하여 실리사이드화 열처리를 40초간 $700{\~}1100^{\circ}C$ 범위에서 실시하였다. 복합 실리사이드의 온도별 전기저항변화, 두께변화, 표면조도변화를 각각 사점전기저항측정기와 광발산주사전자현미경, 주사탐침현미경으로 확인하였다. 적층순서와 관계없이 폴리실리콘으로부터 제조된 복합실리사이드는 $800^{\circ}C$ 이상부터 급격한 고저항을 보이고, 두께도 급격히 얇아졌다. 두께의 감소는 기존의 단결정에서는 없던 현상으로 폴리실리콘의 두께가 한정된 경우 금속성분의 inversion 현상이 커서 폴리실리콘이 오히려 실리사이드 상부에 위치하여 제거되기 때문이라고 생각되었고 $1000^{\circ}C$ 이상에서는 실리사이드가 형성되지 못하였다. 이러한 결과는 나노급 두께의 게이트를 저저항 실리사이드로 만 들기 위해서는 inversion과 두께감소를 고려하여야 함을 의미하였다.