• 센서학회지
• /
• 제28권3호
• /
• pp.177-181
• /
• 2019

Pressure sensors are used in various industries such as automobiles, airplanes, medical equipment, and coolers. Even if the ambient temperature changes, the measurement is reliable and stable. In this study a diaphragm-type pressure sensor was used to derive a temperature-compensated pressure estimation equation for accurate pressure measurement at $100^{\circ}C$ and $-40^{\circ}C$. To understand the characteristics of the pressure sensor diaphragm with respect to temperature and pressure, experiments were conducted in temperature-variable chamber using FEM analysis to confirm that the influence of temperature effect was nonlinear. Based on the experimental results, a nonlinear method for calculating the pressure by compensating for the error due to temperature was derived. The calculated pressure value is lower than 0.5 % at low and high temperatures, and lower than 0.4 % at $22^{\circ}C$, thereby eliminating the effect of temperature.

• 한국농림기상학회지
• /
• 제14권3호
• /
• pp.119-123
• /
• 2012

이 연구는 월 기상자료를 이용하여 작물 생육에 중요한 겨울철 저온 발생일수를 효과적으로 추정하기 위해서 수행되었다. 전국 61개 기상관서의 1981~2010년의 30년 간의 일 최저기온자료를 확보하여 $-15^{\circ}C$부터 $5^{\circ}C$까지 각 온도 이하 일수와 월 최저기온의 평균들을 비교한 결과, 1월 최저기온의 평균을 이용하였을 때 저온 발생일수를 가장 적합하게 추정할 수 있었다. 1월 최저기온 평균자료로부터 기준온도 이하가 되는 저온 발생일수를 추정할 수 있는 2차 함수 형태의 간단한 추정식을 제시하였다. 여러 온도 범위에서 추정식을 활용하기 위하여 추정식의 계수를 저온을 평가하는 기준온도로부터 구할 수 있도록 두 개의 2차 함수식을 도출하였고, 이 식들은 결정계수가 0.995 이상이었다. 분석에 이용된 자료와 기간을 달리하여 1971~2000년 30년 일 기상자료를 이용하여 검증해본 결과 기준온도 $-10{\sim}0^{\circ}C$ 범위에서는 저온 발생일수를 비교적 정확하게 예측할 수 있었으나, $-15^{\circ}C$에서는 다소 과소하게 추정되는 결과를 보였다.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.65-70
• /
• 1998

In this report, the creep properties and creep life estimation by Larson-Miller Parameter(LMP) Method for 2.25Cr1Mo steel to be used as power plant tubes or other components were presented at the high temperatures of 500, 550, and $600^{\circ}C$. It was confirmed experimentally and quantitatively that a creep life estimation equation at such various high temperatures was well derived by LMP and could be used very effectively within the creep life of 10$^3$ hours, but very unreliable and even dangerous for design in a long term of creep life such as 10$^4$ or $10^5$ hours.

• 제어로봇시스템학회논문지
• /
• 제9권9호
• /
• pp.679-691
• /
• 2003

The band-width of disk drive servo system is rapidly increasing for the robustness to external disturbance as the track density is increasing. The increase of the band-width may cause mechanical resonance of an actuator. In disk drive servo system, a notch filter is usually used to suppress the mechanical resonance of the actuator. However, the resonance frequency differs from drive to drive because of manufacturing tolerance and varies with temperature even within a single drive. The variation of resonance frequency degrades the suppression performance of the notch filter. In this paper, we present an adaptive digital notch filter that identifies the resonance frequency of the disk drive servo actutaor precisely and adjusts automatically its center frequency. For this, we design an adaptive FIR digital filter for the estimation of the resonance frequency. The estimation filter identifies the resonance frequency adaptively using the output signal generated from the servo system, which is excited with an excitation signal including all the expected resonance frequency components. We prove mathematically the convergence of the resonance frequency estimation filter. Furthermore, in order to demonstrate the practical use of our work, we present some experimental results using a commercially available disk drive.

• 동력기계공학회지
• /
• 제13권5호
• /
• pp.59-66
• /
• 2009

High temperature and pressure valves in power plant have been used for fluid flowing and leakage occurred owing to valve internal damage such as disc wear, crack and inserting of foreign objects etc. in these valves. Recently, multi-measuring technique applied both ultrasonic and acoustic method have been used for evaluation of valve internal leakage in order to raise measurement reliability. Therefore, we have performed various leakage tests using ultrasonic and acoustic measuring system and acquired leakage data for the various leakage conditions. In this study, we developed the estimation method of regression model through leakage data, and expectation method for valve opening ratio, which is directly proportion to leakage rate, using the established estimation model from the measured data, valve size and fluid pressure so as to enhance data reliability. As a result of this study, it was founded that expectation method of leakage rate by statistical analysis method is appropriate to valve leakage evaluation.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.769-774
• /
• 2016

In the design of sensorless control system for induction motor, high-precision speed estimation is one of the most difficult problems. To solve this problem, the common method is model reference adaptive method (MRAS). MRAS requires accurate motor parameters to estimate rotor speed precisely. However, when motor is running, the variety of temperature and magnetic saturation will lead to the change of motor parameters such as stator resistance and rotor resistance, which will lower the accuracy of the speed estimation. To improve the accuracy and rapidity of speed estimation, this paper analyses the mutual MRAS speed identification based on rotor flux linkage, and proposes an improved mutual MRAS speed identification based on back-EMF. The improved method is verified by Simulink simulation and motor experimental platform based on DSP2812. The results of simulation and experiment indicate that the method proposed by this paper can significantly improve the accuracy of speed identification, and speed up the response of identification.

• 한국농림기상학회지
• /
• 제19권3호
• /
• pp.75-85
• /
• 2017

청명미풍 조건에서 기온역전층 높이와 기온역전강도의 매시 변화를 정량적인 경험식으로 나타내어 야간의 매시 기온을 추정하는 방법을 고안하였다. 2007년 5월부터 2008년 3월까지 강원도 평창군 대관령면 고령지농업연구소에서 초단파 온도 프로파일러 (Model MTP5H)로 지면으로부터 높이 600m까지 50m 간격의 기온 연직 분포를 한 시간 간격으로 측정하였다. 연직기온에서 가장 기온이 높은 고도를 기온역전층 높이로, 역전층의 기온과 지면 위 100m의 기온 편차를 역전강도로 간주하고 야간 동안 시간에 따라 기온 역전층이 발달되는 정도를 모의하는 추정식을 작성하였다. 산사면에서 작물이 실제 경험하는 기온을 추정하기 위해 2014년 10월부터 2015년 11월 23일까지 전남 구례군과 광양시 사이의 중대리 계곡에서 사면의 고도별 기온을 수집하여 연직기온의 역전층 높이 및 역전강도 추정모수를 보정하였다. 지리산 남쪽의 집수역 3개 내에 구축된 검증관측망으로부터 2015년 한 해 동안의 기상자료를 수집하였고, 기상청 방재 및 종관기상관측망으로부터 배경기온을 제작, 기온감률과 함께 기온역전 조건하의 매시 기온을 추정한 다음 검증을 실시하였다. 그 결과, 청명미풍 조건에 대해 19지점 평균 ME $-0.69^{\circ}C$, 평균 RMSE $1.61^{\circ}C$이었고 2000-0100 시간대에서 과소추정오차가 증가되었다. 기존에 사용되어 왔던 최저기온 모형으로 0600 기온을 추정하고 새로운 모의 방법으로 산출된 결과와 추정 오차를 비교한 결과, 평균 ME는 기존 $-0.86^{\circ}C$에서 $-0.12^{\circ}C$로, 평균 RMSE는 $1.72^{\circ}C$에서 $1.34^{\circ}C$로 개선되었다. 청명미풍 조건에서 도출된 기온 추정식의 활용도를 높이기 위해서는 추정 오차를 개선하고 다양한 기상조건에 대한 영향을 반영하는 후속 연구가 필요하다.

• 대기
• /
• 제17권2호
• /
• pp.185-193
• /
• 2007

This study investigates urbanization effect in warming trend of surface air temperature over Korea. The data used in this study consist of the daily minimum and maximum temperatures during the period of 32 years(1968-1999) from 16 stations of KMA. To calculate magnitude and trend of urbanization effect, stations were classified into urban and rural stations using population statistics. Urban stations were defined as those with population densities greater than 1000 persons per kilometer squared in 1995. The others were defined as rural stations. The urban stations were also subdivided into two groups according to their population totals. For estimates of urban effect magnitude, temperature change was calculated by comparing 16-year mean values between 1968-83 and 1984-99. Then, the difference between each urban station and every rural station was calculated. During the analysis period of 32 years, maximum temperature increase is $1.22^{\circ}C$. In the total temperature increase, urban effect is estimated by 28.7%. For minimum temperature, it becomes larger by about 10% than that in maximum temperature. Therefore, urban effect in an increasing trend of minimum temperature is 38.9% in the change of $1.13^{\circ}C$.

• ETRI Journal
• /
• 제27권3호
• /
• pp.319-325
• /
• 2005

In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 춘계학술대회 논문집
• /
• pp.41-46
• /
• 2003

In recently, Is inhabiting more than 70％ indoors during a day in case of company employee and ordinary people which is looking at usual business. Therefore Thermal comfort of human body about indoor temperature and air flow acting very heftily. When intestine temperature is fallen for external low temperature and air flow in winter in case enter into heated room feel comfort by effect of temperature and feel comfort or discomfort by room heating condition gradually. Therefore it is important that grasp thermal comfort about temperature and air flow in heating to keep continuous comfort in indoor dwelling. Temperature and thermal comfort factor of emotion ＆ sensitivity image exert fair effect since heating middle although thermal comfort change greatly effect on sensation about temperature at actuality heating early. Need much study yet in vantage point of emotion ＆ sensitivity although much study were held about thermal and comfort sensibility and when heat in existing research until now. Therefore this study is targeting that evaluate thermal comfort through introduction of estimation method by emotion ＆ sensibility image real and synthetic sensibility about thermal environment that is becoming winter heating.