• 전자공학회논문지D
• /
• 제34D권2호
• /
• pp.38-45
• /
• 1997

본 논문에서는 반도체 소자 제조 공정 중, 염산화 공정 시에 발생하는 스트레스에 따른 산화막의 3차원적 거동을 시뮬레이션하였다. 이를 위해, 이동하는 3차원 경계면에서의 노드 생성 및 제거 기능을 지는 3차원 적응 메쉬 생성기를 개발하였고, 지배 방정식을 유한요소법(finite element method)으로 이산화시켜 수치 해석적으로 해를 구하는, 스트레스 효과를 고려한 3차원 산화 시뮬레이터를 개발하였다. 본 연구에서는 열산화 공정에 의한 산화막의 3차원적 거동을 관찰하기 위하여, 섬구조(island) 및 공구조(hole structure)의 산화막 성장을 <100> 실리콘 기판에 대하여 $1000^{\circ}C$, 60분간 습식 산화 조건에서 시뮬레이션하였다. 초기 산화막의 두께는 $300\AA$, 질화막의 두께는 $2,000\AA$으로 가정하였다. 마스크의 형태에 따라 코너에서의 새부리(bird's beak)형태가 변하는데, 코너에서의 효과는 마스크 형태에 따라 산화제의 확산이 다른 영역에 비해 감소하거나 증가하는 영향이 주된 이유이지만, 스트레스에 의해 그 영향이 더 커짐을 확인하였다. 섬구조에서는 compressive 스트레스에 의해 코너 부근에서 산화가 감소하는 결과를 가져오고, 공구조에서는 tensile 스트레스로 인해 산화가 더 증가하는 결과를 보임을 확인하였다.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.215-221
• /
• 2014

본 논문에서는 RF 고전력 스트레스에 의한 SAW 디바이스의 신뢰성 분석을 위하여 향상된 내전력 시험시스템 및 시험방법을 제안하고 고장분석을 통해 고장메카니즘을 분석하였다. 광학현미경, SEM(Scanning Electron Microscope) 및 EDX(Energy Dispersive X-ray Spectro-scopy)장비를 이용하여 고장 분석한 결과, SAW 디바이스의 고장메카니즘은 고전류 밀도 및 고온 조건에서 줄열에 의한 Electromigration으로 분석하였다. Electromigration은 IDT전극에 void와 hillock을 생성하고, 그 결과로 전극이 단락과 단선되어 삽입손실이 증가하는 것이다. 제안된 내전력 시험시스템과 방법을 이용하여 450MHz CDMA용 SAW 필터의 가속수명시험을 수행하고, 아이링 모델과 와이블 분포를 이용하여 SAW 필터의 $B_{10}$수명은 98,500시간으로 추정하였다.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.22-27
• /
• 2006

Even though the interior of urban transit vehicle has been changed as a preventing measure against fire to make it inflammable, there remains a possibility of fire breaking out in case of gasoline etc being brought in the subway. However, there is also the possibility that in case if fire toxic gas is generated and hot air spreads in carriage it will prove very dangerous for people sitting inside. This is a comparative study where we compare simulation results with model examining the time and direction the fire spreads when it breaks out. Also there is vertical distribution of temperature in carriage where the fire spreads out. This study is about demonstrating how to establish smokeless system in urban vehicle, about its necessity, and about vehicle system restructuring. This study also makes an effort to find more advanced method for efficient fire safety in trains. In existing vehicles, in case of fire, the smoke can't go out when doors are closed and hence it spreads in whole train. Even though the method of using ventilation or exhaust established inside the carriage to throw smoke out is much better than the way of opening end doors in each carriage, this study is trying to do research on second way. Through simulation we see that in second case, even though not as good as the first one, smoke can exit through gates. Even though the first method is better, the second can also be uses to let fire out. We can know that in the first case as the smoke can exit out faster, it provides more safety for people. So this system provides better fire safety condition.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.142-148
• /
• 2004

최근 전자계-열계 해석 소프트웨어의 발전에 힘입어 전자계-열계 해석 이론을 바탕으로 컴퓨터 시뮬레이션에 의한 전기화재의 정확한 원인분석과 조사가 체계적으로 연구되고 있으나, 매우 미흡한 실정이다. 따라서 본 논문에서는 비닐 평형 코드(600 V, VFF, $2C{\times}$1.25mm^2)을 모델로 하여 과전류시 전류크기에 따른 전선의 온도분포 및 이격거리에 따른 도체 상호간의 힘을 컴퓨터 시뮬레이션(Flux2D)을 통하여 계산하며, 또한 직접 제작한 대전류 공급장치(형명 : EHT_EFAD, Korea)을 사용하여 과전류시 전류크기와 공급시간에 따른 도체 상호간의 이격거리에 대하여 실험함으로써 과전류로 인한 전기화재 원인분석 방법에 대하여 제안하고자 한다.

• Ocean and Polar Research
• /
• 제25권4호
• /
• pp.607-615
• /
• 2003

Many organisms are known to survive in icy environments. These include both over wintering terrestrial insects and plants as well the marine fish inhabiting high latitudes. The adaptation of these organisms is both a fascinating and important topic in biology. Marine teleosts in particular, can encounter ice-laden seawater that is approximately $1^{\circ}C$ colder than the colligative freezing point of their body fluids. These animals produce a unique group of proteins, the antifreeze proteins (AFPs) or antifreeze glycoproteins (AFGPs) that absorb the ice nuclei and prevent ice crystal growth. Presently, there are at least four different AFP types and one AFGP type that are isolated from a wide variety of fish. Despite their functional similarity, there is no apparent common protein homology or ice-binding motifs among these proteins, except that the surface-surface complementarity between the protein and ice are important for binding. The remarkable diversity of these proteins and their odd phylogenetic distribution would suggest that these proteins might have evolved recently in response to sea level glaciations just 1-2 million years ago in the northern hemisphere and 10-30 million years ago around Antarctica. Winter flounder, Pleuronectes americanus, has been used as a popular model to study the regulation of AFP gene expression. It has a built-in annual cycle of AFP expression controlled negatively by the growth hormone. The signal transduction pathways, transcription factors and promoter elements involved in this process have been studied in our laboratory and these studies will be presented.

• 대한기계학회논문집B
• /
• 제35권12호
• /
• pp.1351-1358
• /
• 2011

열펌프의 고장감지 및 진단을 위하여 측정값에 대한 분석은 필수적이다. 열펌프의 고장감지는 열전대 등의 온도센서로 수행되는데, 재연성과 센서자체의 오차에 의해 시스템의 정상상태 측정값들은 통상 백색 노이즈의 형태로 존재한다. 고장감지 및 진단시스템을 구축하기 위하여 이상적인 정상상태를 정의하는 기준모델을 추출하게 되는데, 실제 측정값과 모델에 의한 기대값은 수학적 편차, 즉 잔차가 필연적으로 존재하게 된다. 이러한 잔차는 운전조건에 따라 변화하며, 다양한 불확실도를 포함한 확률분포를 갖게 된다. 본 연구에서는 온도센서를 활용하여 정상상태 진단을 수행하고 이를 기반으로 기준모델을 도출하였다. 이후 실측값과 기준모델과의 잔차를 통계적으로 분석하여 고장여부를 판단하는 경계값을 산출하였다. 본 분석에 의하여 열펌프의 고장감지 및 진단시스템의 개발을 위한 불확실도와 경계값을 통계적으로 계산함으로써 진단결과의 확률적 신뢰성을 보장할 수 있는 방법론을 제공하였다.

• Steel and Composite Structures
• /
• 제34권4호
• /
• pp.511-524
• /
• 2020

In this research, a simple four-variable trigonometric integral shear deformation model is proposed for the static behavior of advanced functionally graded (AFG) ceramic-metal plates supported by a two-parameter elastic foundation and subjected to a nonlinear hygro-thermo-mechanical load. The elastic properties, including both the thermal expansion and moisture coefficients of the plate, are also supposed to be varied within thickness direction by following a power law distribution in terms of volume fractions of the components of the material. The interest of the current theory is seen in its kinematics that use only four independent unknowns, while first-order plate theory and other higher-order plate theories require at least five unknowns. The "in-plane displacement field" of the proposed theory utilizes cosine functions in terms of thickness coordinates to calculate out-of-plane shear deformations. The vertical displacement includes flexural and shear components. The elastic foundation is introduced in mathematical modeling as a two-parameter Winkler-Pasternak foundation. The virtual displacement principle is applied to obtain the basic equations and a Navier solution technique is used to determine an analytical solution. The numerical results predicted by the proposed formulation are compared with results already published in the literature to demonstrate the accuracy and efficiency of the proposed theory. The influences of "moisture concentration", temperature, stiffness of foundation, shear deformation, geometric ratios and volume fraction variation on the mechanical behavior of AFG plates are examined and discussed in detail.

• Journal of Welding and Joining
• /
• 제26권4호
• /
• pp.79-84
• /
• 2008

Use of sheet metal structure is increased in various fields such as automobile, aerospace and communication equipment industry. When this structure is welded, welding distortion is generated due to the non-uniformity of temperature distribution. Recently welding distortion becomes a matter of great importance in the structure manufacture industry because it deteriorates the product's quality by bringing about shape error. Accordingly many studies for solving the problems by controlling the welding distortion are being performed. However, it is difficult to remove all kinds of distortion by welding process, though various kinds of methods for reducing distortion are applied to production. Consequently, straightening process is operated if the high precision quality is requested after welding. The local heating method induces compression plastic deformation by thermal expansion in the heating stage and then leaves constriction of length direction in the cooling stage. Accordingly, in the case of sheet metal structure, straightening effect is expected by heating for the part of distortion. This study includes numerical analysis of straightening effect by the local heating method in distortion comes from production of welded sheet metal structure. Particularly straightening effect followed by dimensions of heating area is analyzed according to the numerical analysis. The numerical analysis is performed by constructing 3-dimensional finite element model for 0.4mm stainless steel-sheet metal. Results of this study confirm that straightening effect changes as heating area increases and the optimum value of heating area that proves the maximum straightening effect exists.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.72-82
• /
• 1997

In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.