• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.878-881
• /
• 2010

For better diagnosis and prescription in Korean traditional medicine, Lee Je-Ma (1837-1900) created Sasang Constitution classification which was divided into four groups of Taeyangin, Soyangin, Taeumin and Soumin based on both body shape and natural disposition. The purpose of this study was to investigate the characteristics of facial skin parameters (hydration, lipid and pH) on forehead and cheek according to Sasang Constitution classifications of Taeumin, Soyangin and Soumin in Korean. Eighty-nine Korean female subjects were recruited for this study and the average age of them was 19.9${\pm}$0.84 years. The four groups by the Sasang Constitution were classified by questionnaire for the Sasang Constitution classification proposed by Kyung-Hee Oriental Medicine Hospital. Consequently, thirty-eight (42.7%) among the subjects were grouped into Soumin, twenty-nine (32.6%) into Taeumin, twenty (22.5%) into Soyangin and two (2%) into Taeyangin. Taeyangin group was excluded from statistical analysis due to small subjects. Hydration, lipid and pH parameters on forehead and cheek were measured by using non-invasive instruments of Corneometer (CM 825, Schwarzhaup, Germany), Sebumeter (SM 815, Schwarzhaup, Germany) and Skin-pH-meter (pH 905, Schwarzhaup, Germany), respectively. The measurements by the same investigator were performed under standardized condition with a room temperature of $21^{\circ}C$ and a humidity level of 40% to 50%. As a result, hydration (F=25.481, p=.000), lipid (F=5.753, p=.005) and pH (F=5.010, p=.009) of the forehead skin showed significant differences in the order of Taeumin, Soyangin and Soumin. Hydration (F=23.216, p=.000), lipid (F=6.898 p=.002) and pH (F=5.070, p=.008) of the cheek skin showed significant differences in the order of Taeumin, Soyangin and Soumin. In conclusion, facial skin surface seemed to be dependent on Sasang Constitution classification in Korean. These findings indicated that Sasang Constitution classification might be an useful esthetic treatment for caring facial skin in the future.

• Journal of Power Electronics
• /
• v.3 no.2
• /
• pp.99-114
• /
• 2003

This paper presents a feasible development on a highly accurate quick response adjustable speed drive implementation fur general purpose induction motor which operates on the basis of sensorless slip frequency type vector controlled sine-wave PWM inverter with an automatic tuning machine parameter estimation schemes. In the first place, the sensorless vector control theory on the three-phase voltage source-fed inverter induction motor drive system is developed in slip frequency based vector control principle. In particular, the essential procedure and considerations to measure and estimate the exact stator and rotor circuit parameters of general purpose induction motor are discussed under its operating conditions. The speed regulation characteristics of induction motor operated by the three-phase voltage-fed type current controlled PWM inverter using IGBT's is illustrated and evaluated fur machine parameter variations under the actual conditions of low frequency and high frequency operations for the load torque. In the second place, the variable speed induction motor drive system, employing sensorless vector control scheme which is based on three -phase high frequency carrier PWM inverter with automatic toning estimation schemes of the temperature -dependent and -independent machine circuit parameters, is practically implemented using DSP-based controller. Finally, the dynamic speed response performances for largely changed load torque disturbances as well as steady state speed vs. torque characteristics of this induction motor control implementation are illustrated and discussed from an experimental point of view.

• Nuclear Engineering and Technology
• /
• v.52 no.4
• /
• pp.755-763
• /
• 2020

The critical flow phenomenon has been studied because of its significant effect for design basis accidents in nuclear power plants. Transition points from thermal non-equilibrium to equilibrium are different according to the geometric effect on the critical flow. This study evaluates the uncertainty parameters of the critical flow model for analysis of DBA (Design Basis Accident) with the MARS-KS (Multi-dimensional Analysis for Reactor Safety-KINS Standard) code used as an independent regulatory assessment. The uncertainty of the critical flow model is represented by three parameters including the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio, and their ranges are determined using large-scale Marviken test data. The uncertainty range of the thermal non-equilibrium factor is updated by the MCDA (Model Calibration through Data Assimilation) method. The updated uncertainty range is confirmed using an LBLOCA (Large Break Loss of Coolant Accident) experiment in the LOFT (Loss of Fluid Test) facility. The uncertainty ranges are also used to calculate an LBLOCA of the APR (Advanced Power Reactor) 1400 NPP (Nuclear Power Plants), focusing on the effect of the PCT (Peak Cladding Temperature). The results reveal that break flow is strongly dependent on the degree of the thermal non-equilibrium state in a ruptured pipe with a small L/D ratio. Moreover, this study provides the method to handle the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio in the system code.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.279-286
• /
• 2020

In this article, we develop a reactive distillation (RD) column configuration for the production of hydrogen. This RD column is in the HI decomposition section of the sulphur - iodine (SI) thermochemical cycle, in which HI decomposition and H₂ separation take place simultaneously. The section plays a major role in high hydrogen production efficiency (that depends on reaction conversion and separation efficiency) of the SI cycle. In the column simulation, the rigorous thermodynamic phase equilibrium and reaction kinetic model are used. The tuning parameters involved in phase equilibrium model are dependent on interactive components and system temperature. For kinetic model, parameter values are adopted from the Aspen flowsheet simulator. Interestingly, there is no side reaction (e.g., solvation reaction, electrolyte decomposition and polyiodide formation) considered aiming to make the proposed model simple that leads to a challenging prediction. The process parameters are determined on the basis of optimal hydrogen production as reflux ratio = 0.87, total number of stages = 19 and feeding point at 8th stage. With this, the column operates at a reasonably low pressure (i.e., 8 bar) and produces hydrogen in the distillate with a desired composition (H₂ = 9.18 mol%, H₂O = 88.27 mol% and HI = 2.54 mol%). Finally, the results are compared with other model simulations. It is observed that the proposed scheme leads to consume a reasonably low energy requirement of 327 MJ/kmol of H₂.

• Journal of the Korean Chemical Society
• /
• v.39 no.11
• /
• pp.837-841
• /
• 1995

Thermodynamic parameters for the hydrogen bonding between thiopropionamide(TPA) and proton donors such as triethylphosphine oxide(TEPO), triphenylphosphine oxide(TPPO), trimethylphosphate(TMP), and tributyl phosphate(TBP) in dilute carbon tetrachloride solution have been measured by near-IR spectroscopy. The νa + amide Ⅱ combination band of TPA has been resolved into two Lorentzian-Gaussian product components which have been identified with monomeric TPA and 1 : 1 hydrogen bonded complex. The equilibrium constants and thermodynamic parameters for the formation of 1 : 1 hydrogen bonded complex have been obtained by the analysis of concentration and temperature dependent spectra. The standard enthalpies for the 1 : 1 hydrogen bonded complex formation of TPA with TEPO, TPPO, TMP, and TBP in CCl4 have been found to be - 21.4, - 16.8, - 12.8, and - 12.9 kJ/mol, respectively. The results are explained by the inductive and steric effects of substituents.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.548-558
• /
• 2013

In this work, laser induced breakdown spectroscopy (LIBS) is used to investigate soil samples collected from different desert areas of Riyadh city in Saudi Arabia. Both qualitative analysis and plasma parameters are studied via the observed LIBS spectra. These experiments have been done using a Spectrolaser-7000 system with 50 mJ fundamental wavelength of Nd:YAG laser and detection delay time of 1 microsecond. Many spectral lines are highly resolved for many elements like Al, Fe, Mg, Si, Mn, Na, Ca and K. The electron temperatures Te and electron densities Ne, for the constituent of generated LIBS plasma, are determined for all the collected samples. It is found that both Te and Ne vary from one desert area to other. This variation is due to the change of the elemental concentration in different desert areas that affects the sample's matrices. Time dependent measurements have also been performed on the soil samples. While the signal-to-base ratio (SBR) reached its optimal value at 1 microsecond, the plasma parameters Ne and Te reach values of $4{\times}10^{17}cm^{-3}$ and 9235 K, respectively, at 2.5 microsecond. The later indicate that the plasma cooling processes are slow in comparison to the previously observed results for metallic samples. The observed results show also that in the future it is possible to enhance the exploitation of LIBS in the remote on-line environmental monitoring application, by following up only the values of Ne and Te for one element of the soil desert sample using an optical fiber probe.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.3
• /
• pp.399-407
• /
• 2008

The clamping of torque shear bolt is based on KS B 2819. It was misunderstood that the tension force of the TS bolt was induced generally at the break of pin-tail specified. However, the clamping forces on slip critical connections do not often meet the intended tension, as it considerably varies due to torque coefficient dependent on temperature variables despite the break of the pin tail. In this study, the tension of torque shear bolts were compared with two types of high-strength hexagon bolts by temperature parameters from ${-10^{\circ}C}$ to ${50^{\circ}C}$. Torque shear bolts showed that the average clamping force increased to 20kN as the temperature increased. In case of galvanized high-strength hexagon bolts, the average clamping forces at $0^{\circ}C$, $20^{\circ}C$, $50^{\circ}C$ were recorded over standard bolt tension, 178kN, and the worst standard deviation was 50kN. In case of high-strength hexagon bolts, ave rage clamping forces increased as the temperature went up, and the worst standard deviation was 33kN lower than that of galvanized high-strength hexagon bolts. As for the turn-of-the-nut method, at nut rotation of ${90^{\circ}}$, two types of high-strength hexagon bolts did not met the intended design bolt in tension, 162kN.it is neccessary to re-evaluate the range of turn of nut, ${120^{\circ}{\pm}30^{\circ}}$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.833-841
• /
• 2013

In the case of composite material, a variety of characteristics were expressed depending on the materials that were composed of. In this study, the materials showing non-linear shear behavior were investigated among FRP composite. Each specimen was designed and analyzed according to ASTM D4255 method: regulations on the 2-rail. The dependent variables included in this experiment were a variety of fiber, fiber volume ratio, fiber array direction, temperature, material homogeneity. For determination of characteristics based on the fiber array, fiber array direction of 0, 30, 45, and 60 degrees were selected for test specimen. Temperature of 25, 40, 60, and $80^{\circ}C$ were considered for investigation of FRP materials'shear behavior based on the external temperature. Nonlinear shear behavior was observed throughout the FRP composite material in this study. Also, using vinyl ester resins, high fiber volume ratio, and fiber array direction of 45 degree appeared to show the most prominent nonlinear shear behavior. As for the findings related to the temperature change, non-linear behavior was decreased as the external temperature increased. For factory manufactured product, non-linear behavior was relatively at parity in comparison to the behavior found in the hand lay-up FRP composite specimen.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.2
• /
• pp.184-195
• /
• 1995

A theoretical one-dimensional model for the charging process in stratified thermal storage tanks is established presuming that the fluid ensuing from the tank inlet creates a perfectly mixed, layer above the thermocline. Both the generic and asymptotic closed-form solutions are obtained via the Laplace transformation. The asymptotic solution describes the nature of the charging pertaining to the case of no thermal diffusion, whereas the generic solution is of practical importance to understand the role of operating parameters on the stratification. The present model is validated through comparison with available experimental data, where they agree well with each other within a reasonable limit. An interpretation of the exact solution entails two important features associated with the charging process. The first is that an in-crease in the mixing depth $h_m$ causes a relatively slow temperature rise in the perfectly mixed region, but on the other hand it results in a faster decay of the overall temperature gradient across the thermocline. Next is the predominance of the mixing depth in the presence of the prefectly mixed region. In such a case the effect of the Peclet number is marginal and there-fore the thermal characteristics are solely dependent on the mixing depth paticularly for large $h_m$. The Peclet number affects significantly only for the case without mixing. Variation of the storage efficiency in response to the change in the mass flow rate agrees favorably with the published experimental results, which confirms the utility of the present study.

• Korean Journal of Environmental Biology
• /
• v.29 no.4
• /
• pp.379-387
• /
• 2011

Copepod nauplii plays an important role as a linker between the microbial food web and classical food chain in marine ecosystem and is an essential food source for early stage of many larval fishes. Study on the influencing factors on the growth of copepod naupliar stages has been rarely carried out in despite of these ecological significances. Many studies have shown that food availability and temperature are major factors to influence copepod growth. However, due to the complicated environment parameters in coastal ecosystem, the relationships between growth of copepods and influencing factors are still unclear under the natural condition. Growth rates of the copepod $Acartia$ $hongi$ nauplii were measured in Kyeonggi Bay from February to December 2001. $Acartia$ $hongi$ is numerically abundant and widespread predominant species in the coastal regions of the Yellow Sea and occurs continuously throughout the year, with a maximum peak in late spring. The naupliar growth rates of $Acartia$ $hongi$ by the artificial cohort method varied from 0.03 to 0.18 $day^{-1}$, with a mean of 0.09 $day^{-1}$. The overall naupliar growth rates showed a significantly positive relationship with the variation in water temperature. However, Previous study reported that the growth rates of adult $Acartia$ $hongi$ were primarily influenced by the variation in chlorophyll-$a$. Therefore, these differences demonstrated that the influencing factors of growth did not correspond with the developmental stages. The results of this study suggest that the dissimilarity of growth between nauplius and adult female resulted from the size-dependant difference in food availability and the growth of older developmental stages containing adults are more food-dependent than juveniles.